2D drawing tools
Guides: 24
- Add rectangles with offsets and use copy multiply for repeatsAdd rectangles with the required offset and then use copy-multiply-straight-fixed-copy to create multiple copies in one step.
- Complete an open-ended boundary with the line tool inside tilingClose a drafted area that is open-ended by drawing its missing edge with the line tool inside the tiling function so tiling can succeed.
- Draw an arc with the 3-point arc button in the sketcherDraw an arc by clicking its start, its end, then a point it passes through, and close three lines into a shape with one curved edge.
- Enable grouting lines and adjust their appearanceTurn on grouting lines and then adjust their appearance, for example make them darker, to suit the design.
- Enable grouting lines and customize pattern sizesEnable grouting lines and customize pattern sizes for your tiles.
- Make grout lines nearly invisibleChange the grout line colour and reduce the grout line width so the lines almost disappear in the view.
- Offset a line with copy or move in panel designChoose copy to duplicate a selected line at a distance or move to relocate it without a duplicate.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- Override layer line styles in a view's View Specific LayersSet a layer's Line Color, Line Type and Line Thickness for one view with its pencil, and see which layers are Overridden.
- Use XL for construction lines and CP to copy at a distanceDraw construction lines with XL and copy a line at a typed distance with CP so you need not take measurements manually.
- Add strip lights using rectangle, line or three-point arcAdd strip lights from Insert > Strip light and draw them as a rectangle, a line or a three-point arc, then set their intensity and colour.
- Create a cut in a panel using edit panel design and offset rectangleCut a panel by drawing the cut shape and moving its edge with the offset rectangle while keeping the panel outline intact.
- Build false ceilings from 2D rectangles and extrusionsCreate a false ceiling from 2D rectangles and extrusions, then add and adjust lighting types individually.
- Change ceiling tile pattern material and grouting line colourApply a tile as the ceiling pattern material and then change the colour of its grouting lines.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Draw curved walls with Arc Drawing modesDraw curved walls using Draw by Bending, Draw around Center or Draw along Tangent, and adjust the radius from the wall's left panel.
- Edit tiling shape in 3D to fix alignment and stray linesAdjust tiling alignment in 3D and clean up stray outline lines so the tiling follows the shape you want.
- Get elevation and plan lines generated by defaultLet the design module generate elevation and plan lines so you do not have to draw them from scratch.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
More guides 4
Show all (4)
- Use repeat with spacing and base, start and end pointsCreate a repeated pattern along a line by running the repeat command with the required spacing and points, offsetting the start from a feature when needed and marking reference gaps with construction lines before drawing panels.
- Create a framing profile around a shape with offset copyDraw the outline with extrude line and three-point arc, then use offset copy to build a parallel framing profile around it.
- Import a floor plan with AI Floor plan and set its scaleUpload a floor plan, draw a line on the preview and type its real length in mm so walls, rooms, doors and windows are placed from the origin you click.
- Use AutoCAD-style drawing and editing tools in InfurniaDraw and edit with the same tools you know from AutoCAD, including line, three-point arc, rectangle, circle, polyline, trim, extend, offset, fillet, copy and mirror.