Use repeat with spacing and base, start and end points

Create a repeated pattern along a line by running the repeat command with the required spacing and points, offsetting the start from a feature when needed and marking reference gaps with construction lines before drawing panels.

1. To create a repeated pattern along a line, use the repeat command with the required spacing, then specify the base point, the start point and the end point.

2. If the start must be offset from a feature such as a pocket, create a construction line first and place the start point at the required offset before running the repeat.

3. Before drawing a panel, use the construction line tool to mark reference gaps such as the false ceiling drop and skirting gap. Draw a line at the top and bottom, select it, and use the copy command with a fixed distance to offset it by the required amount (e.g., 100 mm for ceiling drop, 100 mm for skirting). This ensures the panel is positioned correctly within the wall space.

   ✓ Checked in the product on 26 September 2026