Import a floor plan with AI Floor plan and set its scale
Upload a floor plan, draw a line on the preview and type its real length in mm so walls, rooms, doors and windows are placed from the origin you click.
AI Floor plan has three steps (Upload Floorplan, Set Scale, Confirm).
In Set Scale a line is drawn on the preview with two clicks and its real length typed in mm.
After 'Import Floorplan' nothing is added until a point is clicked in the floor plan ('Click to place floorplan origin (Esc to cancel)').
The walls, rooms, doors and windows are placed from that origin.
Project units are set from the design's Home tab 'Project Units (UN)' button (metricSettings): Project Units Feet Inch / millimeter and 'mm Accuracy' 1 mm / 0.1 mm / 0.01 mm; the current setting shows at the top right ('Project Units: 1 mm').
✓ 2026년 10월 19일에 제품에서 확인됨Typing U then N on the canvas offers 'Project Units (UN)' in the command search; Enter opens Project Units in the left panel. Feet Inch makes the header read 'ft in 1/8"' with an accuracy choice of 1", 1/2", 1/4", 1/8", 1/16"; millimeter makes it read '1 mm' with 1 mm, 0.1 mm, 0.01 mm.
✓ 2026년 10월 19일에 제품에서 확인됨In a viewport image's Scale group, entering a Presentation value other than 1 rewrites the pair to Presentation 1 with the equivalent Design value: Design 50 with Presentation 2 reads back as Design 25, Presentation 1.
✓ 2026년 10월 22일에 제품에서 확인됨