台面
指南:36
- 在台面层级添加灶具,在家具层级添加烟机将灶具放置在台面上,并让烟机穿过家具层级,使两者在设计中的位置都正确。
- 使用 Replace 按钮更换台面饰面选择台面单元,然后从 Replace 列表中选择新选项,即可更改台面饰面。
- 更改台面厚度不会自动更改顶板了解为什么更改台面厚度后,厨房地柜的顶板仍为横撑板。
- 使用Modify Countertop为一个台面应用到多个单元选择多个柜体,在一个弹窗中一起设置它们的台面厚度和材质。
- 使用防火板实体更改台面和柜体材质通过修改台面并应用更改来确认材质更改。
- 从台面级别设置添加防溅板将防溅板作为台面级别的修改添加,设置其高度并向上移动,并防止它延伸到瓷砖后面。
- 在台面上添加灶具选择台面,然后从库中挑选灶具,将其放置在台面高度。
- 按边添加台面下垂和延伸在选定的边上延伸台面,并开启带高度的下垂,使延伸部分与设计对齐。
- 从 Countertop 菜单更改台面材质和厚度选择台面材质并设置其厚度,可以跟随材质 SKU,也可以自行输入数值。
- 通过选择树或单元更改台面材料选择单元或使用选择树,然后选择子类别和具体材料或颜色,即可更改台面材料。
- 在家具层级编辑台面配件添加到台面上的配件(如灶具或水槽)在家具层级(即 Furniture/Light Unit 层级)处理,而不是在柜体层级处理。
- 台面如何影响所显示的地柜高度了解为什么在地柜上添加或移除台面,都不会改变该柜体所显示的柜身高度。
- 从属性面板修改台面和拉手在属性面板中,Select units 可更改台面材质和厚度,或更换拉手。
- 手动将植物放置在台面上将炉灶等电器放置在台面上,但植物需手动替换或定位。
- 在花岗岩下添加台面垫板在台面下添加一块带独立厚度和材料的垫板支撑板,不需要时再将其移除。
- Edit countertop and XYZ position from Quick AccessUse the Quick Access position controls to move a unit horizontally with X and Z and vertically with Y, while cabinet and shutter removal and constructional changes stay in the customize and construction options.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- 台面转角倒圆角或倒斜角为四个台面转角分别设置倒圆角或倒斜角,并输入各自的数值。
- Find the countertop brightness and glossiness settingsSelect the countertop to open its level and see which controls it offers.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.
- How a countertop side's Extension Options value includes its Countertop DropLearn how a side's Countertop Drop is added to its Extension Options value while the slab itself still runs only the set amount past the unit.
- 将台面向上偏移值设置为其高度将台面或挡水板的向上偏移设置为与其高度一致,使其保持在正确的高度。
- 将水槽放在台面上,而不是斜面板上水槽只能放在花岗岩等台面上;如果需要在斜面板或有角度的面板上放置水槽,请使用手动插入的水暖配件。
- Position a countertop drop and backsplash on the countertopLearn how a countertop drop hangs from the underside of the countertop slab and how to set the shift so a backsplash stands exactly on the countertop.
- 重新定位台面并塑造其前部型材沿 XYZ 轴移动台面,并平移和延伸前部以表示型材。
- Resize or remove a sink from the selection treeChange a sink's height, width and depth, or remove it entirely, using the furniture light unit in the selection tree.
- Resize or remove sinks and hobs from the selection treeSelect a sink or hob in the selection tree to resize or delete it, since built-in appliances are managed at the countertop level.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- 自定义柜体结构、踢脚板、台面和柜体板件在选中的柜体上打开自定义选项卡,设置其结构、踢脚板、台面和柜体板件。
- 在偏好设置中启用门板和台面标注开启门板和台面的标注偏好设置,使这些部件可被选中并进行标注。
- 使用轴线和台面层级放置灶具和水槽组件在灶具的家具/灯具单元层级使用 XYZ 轴定位灶具,并在台面层级使用 Sink 选项添加水槽。
- Use drops as a floor drop or backsplash and raise the countertopSet a drop's height and shift so it reaches the floor, covers the tiling, or lifts the countertop to the required level.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- 在流程平面图中标注百叶窗和台面的尺寸在流程平面图中,百叶窗和台面的尺寸标注可采用点对点或线对线方式,推荐使用线对线。
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.