Change countertop material and thickness from the Countertop menu
Pick the countertop material and set its thickness, either following the material SKU or entering a value yourself.
Countertop thickness has an inheritance setting per cabinet/corner unit: when set to follow the SKU, the thickness is automatically taken from the selected countertop material's catalogue height and updates whenever the material is changed; otherwise the manually entered thickness is kept.
The countertop material and thickness are changed from the unit's Countertop menu: Material opens the countertop catalogue (a carousel of cards) and Thickness has Inheritance (SKU / Self) with a Value. Modify Countertop is offered when several units are selected and applies one countertop to all of them.
✓ 已于 2026年10月22日 在产品中核实
The slab updates in the unit as soon as the change is applied.
✓ 已于 2026年10月20日 在产品中核实
The countertop material, per-corner edge operations and thickness are separate controls in the unit's Countertop menu. The edge operations can be changed without disturbing the thickness; so can the material while Thickness Inheritance is Self. While it is SKU, a material change sets the thickness from the new material's catalogue height.
The thickness can also be set to a specific value such as 40 mm for design purposes.
✓ 已于 2026年10月22日 在产品中核实
When the countertop thickness inheritance is set to follow the material SKU, changing the countertop material automatically updates the slab thickness from the new material's catalogue height.
✓ 已于 2026年10月22日 在产品中核实
Switching the model is the intended way to change the countertop rather than entering an exact height and depth.
The slab thickness field shows the current value (for example 150 mm).
Any required value such as 50 mm or 70 mm can be entered directly.
✓ 已于 2026年10月22日 在产品中核实
The material is picked from the countertop's Material control, which opens the countertop catalogue: a carousel of cards grouped by sub-category, such as granite and marble.
