કાઉન્ટરટોપ
માર્ગદર્શિકાઓ: 36
- કાઉન્ટરટોપ લેવલ પર હોબ અને ફર્નિચર લેવલ પર ચિમની ઉમેરોકાઉન્ટરટોપ પર હોબ મૂકો અને ફર્નિચર લેવલ દ્વારા ચિમની મૂકો, જેથી બંને ડિઝાઇનમાં યોગ્ય રીતે બેસે.
- Replace બટન વડે કાઉન્ટરટોપનો ફિનિશ બદલોકાઉન્ટરટોપના યુનિટ પસંદ કરીને અને Replace યાદીમાંથી નવો વિકલ્પ પસંદ કરીને તેનો ફિનિશ બદલો.
- કાઉન્ટરટોપની જાડાઈ બદલવાથી ટોપ પેનલ આપોઆપ બદલાતું નથીજાણો કે કાઉન્ટરટોપની જાડાઈ બદલતી વખતે કિચન બેઝ યુનિટનું ટોપ પેનલ રેલ પેનલ કેમ રહે છે.
- Modify Countertop વડે એક કાઉન્ટરટોપ ઘણા યુનિટ પર લાગુ કરોઘણા કેબિનેટ પસંદ કરો અને એક જ પોપ-અપમાં તેમની કાઉન્ટરટોપ જાડાઈ અને મટીરિયલ સાથે સેટ કરો.
- લેમિનેટ સોલિડનો ઉપયોગ કરીને કાઉન્ટરટોપ અને કેબિનેટની સામગ્રી બદલોકાઉન્ટરટોપમાં ફેરફાર કરીને અને ફેરફારો લાગુ કરીને સામગ્રીના ફેરફારની પુષ્ટિ કરો.
- કાઉન્ટરટોપ સ્તરની સેટિંગ્સમાંથી બેકસ્પ્લેશ ઉમેરોકાઉન્ટરટોપ-સ્તરના ફેરફાર તરીકે બેકસ્પ્લેશ ઉમેરો, તેની ઊંચાઈ સેટ કરો અને તેને ઉપર ખસેડો, અને તે ટાઇલ્સની પાછળ ન જાય તે રાખો.
- કાઉન્ટરટોપ પર હોબ ઉમેરોકાઉન્ટરટોપ પસંદ કરો અને લાઇબ્રેરીમાંથી હોબ પસંદ કરીને તેને કાઉન્ટરટોપ સ્તરે મૂકો.
- દરેક બાજુ પર કાઉન્ટરટોપ ડ્રોપ્સ અને એક્સ્ટેન્શન્સ ઉમેરોપસંદ કરેલી બાજુઓ પર કાઉન્ટરટોપ લંબાવો અને ઊંચાઈ સાથે ડ્રોપ્સ ચાલુ કરો જેથી એક્સ્ટેન્શન ડિઝાઇન સાથે સંરેખિત થાય.
- Countertop મેનૂમાંથી કાઉન્ટરટોપની સામગ્રી અને જાડાઈ બદલોકાઉન્ટરટોપની સામગ્રી પસંદ કરો અને તેની જાડાઈ સેટ કરો — કાં તો સામગ્રીના SKUને અનુસરીને, અથવા જાતે મૂલ્ય દાખલ કરીને.
- સિલેક્શન ટ્રી અથવા યુનિટ દ્વારા કાઉન્ટરટોપની સામગ્રી બદલોયુનિટ પસંદ કરીને અથવા સિલેક્શન ટ્રીનો ઉપયોગ કરીને, પછી ઉપશ્રેણી અને ચોક્કસ સામગ્રી કે રંગ પસંદ કરીને કાઉન્ટરટોપની સામગ્રી બદલો.
- ફર્નિચર લેવલ પર કાઉન્ટરટોપ એક્સેસરીઝ સંપાદિત કરોકાઉન્ટરટોપ પર ઉમેરાયેલી એક્સેસરીઝ, જેમ કે હોબ કે સિંક, કેબિનેટ લેવલને બદલે Furniture/Light Unit લેવલ પર સંભાળવામાં આવે છે.
- કાઉન્ટરટોપ કેવી રીતે દર્શાવેલ બેઝ યુનિટની ઊંચાઈને અસર કરે છેજાણો કે બેઝ યુનિટ પર કાઉન્ટરટોપ ઉમેરવાથી કે દૂર કરવાથી તે યુનિટ માટે દર્શાવેલ કાર્કસની ઊંચાઈ કેમ કદી બદલાતી નથી.
- પ્રોપર્ટીઝ પેનલમાંથી કાઉન્ટરટોપ અને હેન્ડલ બદલોપ્રોપર્ટીઝ પેનલમાંથી તેમની કાઉન્ટરટોપ સામગ્રી અને જાડાઈ બદલવા અથવા તેમના હેન્ડલ બદલવા માટે Select units.
- Place plants on countertops manuallyPlace appliances like hobs on the countertop, but replace or position a plant manually.
- ગ્રેનાઇટ નીચે કાઉન્ટરટોપ પ્લાય ઉમેરોકાઉન્ટરટોપ નીચે તેની પોતાની જાડાઈ અને મટીરિયલ સાથે પ્લાય સપોર્ટ પેનલ ઉમેરો, અને જરૂર ન હોય ત્યારે તેને ફરી દૂર કરો.
- Edit countertop and XYZ position from Quick AccessUse the Quick Access position controls to move a unit horizontally with X and Z and vertically with Y, while cabinet and shutter removal and constructional changes stay in the customize and construction options.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- કાઉન્ટરટોપના ખૂણાને ફિલેટ અથવા ચેમ્ફર કરોચાર કાઉન્ટરટોપ ખૂણામાંથી દરેકને દાખલ કરેલા મૂલ્ય સાથે તેની પોતાની ગોળાકાર અથવા ચેમ્ફર કિનારી આપો.
- Find the countertop brightness and glossiness settingsSelect the countertop to open its level and see which controls it offers.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.
- How a countertop side's Extension Options value includes its Countertop DropLearn how a side's Countertop Drop is added to its Extension Options value while the slab itself still runs only the set amount past the unit.
- કાઉન્ટરટોપની શિફ્ટ-અપ કિંમત તેની ઊંચાઈ સાથે મેળવોકાઉન્ટરટોપ અથવા બેકસ્પ્લેશને યોગ્ય ઊંચાઈ પર રાખવા માટે તેની શિફ્ટ-અપ તેની ઊંચાઈ સાથે મેળવો.
- સિંકને કાઉન્ટર પર મૂકો, ત્રાંસી પેનલ પર નહીંસિંક ફક્ત ગ્રેનાઇટ જેવા કાઉન્ટર પર જ મૂકો, અને જ્યારે ત્રાંસી કે કોણીય પેનલ પર સિંકની જરૂર હોય ત્યારે મેન્યુઅલી ઉમેરેલું પ્લમ્બિંગ ફિક્સ્ચર વાપરો.
- Position a countertop drop and backsplash on the countertopLearn how a countertop drop hangs from the underside of the countertop slab and how to set the shift so a backsplash stands exactly on the countertop.
- કાઉન્ટરટોપને ફરીથી સ્થાન આપો અને તેની આગળની પ્રોફાઇલ આકાર આપોકાઉન્ટરટોપને XYZ અક્ષો પર ખસેડો અને પ્રોફાઇલ દર્શાવવા માટે આગળનો ભાગ ખસેડો અને લંબાવો.
- Resize or remove a sink from the selection treeChange a sink's height, width and depth, or remove it entirely, using the furniture light unit in the selection tree.
- Resize or remove sinks and hobs from the selection treeSelect a sink or hob in the selection tree to resize or delete it, since built-in appliances are managed at the countertop level.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- કેબિનેટ બાંધણી, સ્કર્ટિંગ, કાઉન્ટરટોપ અને કાર્કાસ પેનલ કસ્ટમાઇઝ કરોપસંદ કરેલા કેબિનેટ પર customize ટૅબ ખોલીને તેની બાંધણી, સ્કર્ટિંગ, કાઉન્ટરટોપ અને કાર્કાસ પેનલ સેટ કરો.
- પસંદગીઓમાં શટર અને કાઉન્ટરટોપ માપન સક્ષમ કરોશટર અને કાઉન્ટરટોપ માટે માપન પસંદગી ચાલુ કરો, જેથી તે ભાગો પસંદ કરી શકાય અને તેમનું માપન થઈ શકે.
- એક્સિસ અને કાઉન્ટરટોપ લેવલનો ઉપયોગ કરીને હોબ અને સિંક ઘટકો મૂકોહોબને તેના Furniture/Light Unit લેવલ પર XYZ એક્સિસ સાથે સ્થિત કરો અને કાઉન્ટરટોપ લેવલ પર Sink વિકલ્પ સાથે સિંક ઉમેરો.
- ડ્રોપને ફ્લોર ડ્રોપ અથવા બેકસ્પ્લેશ તરીકે વાપરો અને કાઉન્ટરટોપ ઊંચું કરોડ્રોપની ઊંચાઈ અને શિફ્ટ સેટ કરો જેથી તે ફ્લોર સુધી પહોંચે, ટાઇલિંગ ઢાંકે, અથવા કાઉન્ટરટોપને જરૂરી લેવલ સુધી ઊંચું કરે.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- ફ્લો પ્લાનમાં શટર અને કાઉન્ટરટોપનું માપનફ્લો પ્લાનમાં શટર અને કાઉન્ટરટોપનું માપન પોઇન્ટ-ટુ-પોઇન્ટ અથવા લાઇન-ટુ-લાઇન કરી શકાય છે, જેમાં લાઇન-ટુ-લાઇન પસંદ કરવામાં આવે છે.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.