상판
가이드: 36
- Add a hob at countertop level and a chimney at furniture levelPlace a hob on the countertop and a chimney through the furniture level so both sit correctly in the design.
- Replace 버튼으로 상판 마감재 교체하기상판의 유닛을 선택하고 Replace 목록에서 새 옵션을 골라 상판의 마감재를 변경하세요.
- 상판 두께를 변경해도 상부 패널은 자동으로 변경되지 않습니다주방 하부장의 상부 패널이 상판 두께를 변경해도 레일 패널로 유지되는 이유를 알아보세요.
- Modify Countertop로 여러 유닛에 상판 하나를 적용여러 캐비닛을 선택하고 팝업 하나에서 상판 두께와 재질을 함께 설정하세요.
- 라미네이트 솔리드를 사용하여 상판과 캐비닛 소재 변경상판을 수정하고 변경 사항을 적용하여 소재 변경을 확인하세요.
- 카운터탑 레벨 설정에서 백스플래시 추가카운터탑 레벨 수정으로 백스플래시를 추가하고, 높이를 설정하고 위로 이동하며, 타일 뒤로 이어지지 않도록 하세요.
- Add a hob to a countertopSelect the countertop and pick a hob from the library to place it at countertop level.
- 측면별로 상판 드롭과 확장을 추가선택한 측면에서 상판을 확장하고 높이가 있는 드롭을 켜서 확장부가 디자인과 정렬되도록 하세요.
- Countertop 메뉴에서 상판 재질과 두께 변경상판 재질을 선택하고 두께를 설정하세요. 재질 SKU를 따르거나 값을 직접 입력할 수 있습니다.
- 선택 트리 또는 유닛을 통해 상판 재질 변경유닛을 선택하거나 선택 트리를 사용한 후 하위 카테고리와 특정 재질 또는 색상을 선택하여 상판의 재질을 변경합니다.
- 가구 레벨에서 상판 액세서리 편집하브나 싱크대와 같이 상판 위에 추가되는 액세서리는 캐비닛 레벨이 아니라 Furniture/Light Unit 레벨에서 처리됩니다.
- 상판이 표시되는 하부장 높이에 미치는 영향하부장에 상판을 추가하거나 제거해도 해당 유닛에 표시되는 몸체 높이는 변경되지 않는 이유를 알아보세요.
- 속성 패널에서 상판과 손잡이 수정속성 패널에서 상판 재질과 두께를 변경하거나 손잡이를 교체하려면 Select units하세요.
- Place plants on countertops manuallyPlace appliances like hobs on the countertop, but replace or position a plant manually.
- 화강암 아래에 상판 합판 추가자체 두께와 재료를 가진 합판 지지 패널을 상판 아래에 추가하고, 필요하지 않을 때 다시 제거하세요.
- Edit countertop and XYZ position from Quick AccessUse the Quick Access position controls to move a unit horizontally with X and Z and vertically with Y, while cabinet and shutter removal and constructional changes stay in the customize and construction options.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- 상판 모서리 둥글리기 또는 모따기상판의 네 모서리 각각에 입력한 값으로 둥근 모서리 또는 모따기 모서리를 적용합니다.
- Find the countertop brightness and glossiness settingsSelect the countertop to open its level and see which controls it offers.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.
- How a countertop side's Extension Options value includes its Countertop DropLearn how a side's Countertop Drop is added to its Extension Options value while the slab itself still runs only the set amount past the unit.
- 상판의 이동 값을 높이에 맞추기상판이나 백스플래시의 이동 값을 높이에 맞게 설정하여 올바른 높이에 유지하세요.
- 싱크대는 경사진 패널이 아니라 카운터 위에 배치하세요싱크대는 화강암과 같은 카운터 위에만 배치하세요. 경사지거나 각진 패널 위에 필요할 때는 배관 설비를 수동으로 삽입해 사용하세요.
- Position a countertop drop and backsplash on the countertopLearn how a countertop drop hangs from the underside of the countertop slab and how to set the shift so a backsplash stands exactly on the countertop.
- 상판을 재배치하고 전면 프로파일의 형태를 지정합니다XYZ 축을 따라 상판을 이동하고, 전면을 이동 및 연장하여 프로파일을 표시합니다.
- Resize or remove a sink from the selection treeChange a sink's height, width and depth, or remove it entirely, using the furniture light unit in the selection tree.
- Resize or remove sinks and hobs from the selection treeSelect a sink or hob in the selection tree to resize or delete it, since built-in appliances are managed at the countertop level.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- 캐비닛 구조, 걸레받이, 상판, 몸통 패널 맞춤 설정선택한 캐비닛에서 맞춤 설정 탭을 열어 구조, 걸레받이, 상판, 몸통 패널을 설정하세요.
- 환경설정에서 셔터 및 상판 치수 표시 활성화셔터와 상판에 대한 치수 표시 환경설정을 켜면 해당 부재를 선택할 수 있고 치수를 표시할 수 있습니다.
- Place hob and sink components using axis and countertop levelPosition a hob with the XYZ axis at its Furniture/Light Unit level and add a sink with the Sink option at the countertop level.
- Use drops as a floor drop or backsplash and raise the countertopSet a drop's height and shift so it reaches the floor, covers the tiling, or lifts the countertop to the required level.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- 흐름 평면도에서 셔터와 조리대 치수 기입흐름 평면도에서 셔터와 조리대의 치수는 점 대 점 또는 선 대 선으로 기입할 수 있으며, 선 대 선을 권장합니다.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.