Countertops
Guides: 36
- Add a hob at countertop level and a chimney at furniture levelPlace a hob on the countertop and a chimney through the furniture level so both sit correctly in the design.
- Replace a countertop finish using the Replace buttonChange the finish of a countertop by selecting its units and picking a new option from the Replace list.
- Changing countertop thickness does not auto-change the top panelLearn why the top panel of a kitchen base unit stays a rail panel when you change the countertop thickness.
- Apply one countertop to several units with Modify CountertopSelect several cabinets and set their countertop thickness and material together in one pop-up.
- Change countertop and cabinet material using laminate solidsConfirm the material change by modifying the countertop and applying the changes.
- Add a backsplash from countertop level settingsAdd a backsplash as a countertop-level modification, set its height and shift it up, and keep it from running behind the tiles.
- Add a hob to a countertopSelect the countertop and pick a hob from the library to place it at countertop level.
- Add countertop drops and extensions per sideExtend the countertop on chosen sides and switch on drops with a height so the extension aligns with the design.
- Change countertop material and thickness from the Countertop menuPick the countertop material and set its thickness, either following the material SKU or entering a value yourself.
- Change countertop material via selection tree or unitChange a countertop's material by selecting the unit or using the selection tree, then choosing a subcategory and a specific material or colour.
- Edit countertop accessories at furniture levelAccessories added onto a countertop, such as a hob or sink, are handled at the Furniture/Light Unit level rather than cabinet level.
- How countertops affect displayed base unit heightLearn why adding or removing a countertop on a base unit never changes the carcass height shown for that unit.
- Modify countertop and handles from the properties panelSelect units to change their countertop material and thickness or swap their handles from the properties panel.
- Place plants on countertops manuallyPlace appliances like hobs on the countertop, but replace or position a plant manually.
- Add countertop ply under graniteAdd a ply support panel under the countertop with its own thickness and materials, and remove it again when not needed.
- Edit countertop and XYZ position from Quick AccessUse the Quick Access position controls to move a unit horizontally with X and Z and vertically with Y, while cabinet and shutter removal and constructional changes stay in the customize and construction options.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Fillet or chamfer countertop cornersGive each of the four countertop corners its own rounded or chamfered edge with an entered value.
- Find the countertop brightness and glossiness settingsSelect the countertop to open its level and see which controls it offers.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.
- How a countertop side's Extension Options value includes its Countertop DropLearn how a side's Countertop Drop is added to its Extension Options value while the slab itself still runs only the set amount past the unit.
- Match countertop shift-up value to its heightKeep a countertop or backsplash at the right elevation by setting its shift-up to match its height.
- Place a sink on a counter, not a slanted panelPlace sinks only on counters such as granite, and use a manually inserted plumbing fixture when you need one on a slanted or angled panel.
- Position a countertop drop and backsplash on the countertopLearn how a countertop drop hangs from the underside of the countertop slab and how to set the shift so a backsplash stands exactly on the countertop.
- Reposition the countertop and shape its front profileMove the countertop along the XYZ axes and shift and extend the front to indicate a profile.
- Resize or remove a sink from the selection treeChange a sink's height, width and depth, or remove it entirely, using the furniture light unit in the selection tree.
- Resize or remove sinks and hobs from the selection treeSelect a sink or hob in the selection tree to resize or delete it, since built-in appliances are managed at the countertop level.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- Customize cabinet construction, skirting, countertop and carcass panelsOpen the customize tab on a selected cabinet to set its construction, skirting, countertop and carcass panels.
- Enable shutter and countertop dimensioning in preferencesTurn on the dimension preference for shutters and countertops so those parts become selectable and can be dimensioned.
- Place hob and sink components using axis and countertop levelPosition a hob with the XYZ axis at its Furniture/Light Unit level and add a sink with the Sink option at the countertop level.
- Use drops as a floor drop or backsplash and raise the countertopSet a drop's height and shift so it reaches the floor, covers the tiling, or lifts the countertop to the required level.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Dimension shutters and countertops in a flow planDimension shutters and countertops in a flow plan either point-to-point or line-to-line, with line-to-line preferred.
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.