কাউণ্টাৰটপ
গাইড: 36
- কাউণ্টাৰটপ পৰ্যায়ত হব আৰু ফাৰ্নিচাৰ পৰ্যায়ত চিমনী যোগ কৰককাউণ্টাৰটপত এটা হব আৰু ফাৰ্নিচাৰ পৰ্যায়ৰ মাজেৰে এটা চিমনী স্থাপন কৰক, যাতে দুয়োটা ডিজাইনত সঠিকভাৱে থাকে।
- Replace বুটাম ব্যৱহাৰ কৰি কাউণ্টাৰটপৰ ফিনিছ সলনি কৰককাউণ্টাৰটপৰ ইউনিটসমূহ বাছনি কৰি আৰু Replace তালিকাৰ পৰা নতুন বিকল্প এটা বাছি কাউণ্টাৰটপৰ ফিনিছ সলনি কৰক।
- কাউণ্টাৰটপৰ ডাঠতাই সলনি কৰিলে ওপৰৰ পেনেল স্বয়ংক্ৰিয়ভাৱে সলনি নহয়কিয় ৰান্ধনীঘৰৰ বেছ ইউনিটৰ ওপৰৰ পেনেল কাউণ্টাৰটপৰ ডাঠতা সলনি কৰিলেও ৰেইল পেনেল হৈয়ে থাকে, সেয়া জানি লওক।
- Modify Countertop ৰে কেইবাটাও ইউনিটত এটা কাউণ্টাৰটপ প্ৰয়োগ কৰককেইবাটাও কেবিনেট বাছনি কৰি এটা পপ-আপত সিহঁতৰ কাউণ্টাৰটপৰ ডাঠতা আৰু সামগ্ৰী একেলগে নিৰ্ধাৰণ কৰক।
- লেমিনেট ছলিড ব্যৱহাৰ কৰি কাউণ্টাৰটপ আৰু কেবিনেটৰ সামগ্ৰী সলনি কৰককাউণ্টাৰটপ পৰিবৰ্তন কৰি আৰু পৰিবৰ্তনবোৰ প্ৰয়োগ কৰি সামগ্ৰীৰ পৰিবৰ্তন নিশ্চিত কৰক।
- কাউণ্টাৰটপ স্তৰৰ ছেটিংছৰ পৰা বেকস্প্লেছ যোগ কৰককাউণ্টাৰটপ স্তৰৰ পৰিৱৰ্তন হিচাপে বেকস্প্লেছ যোগ কৰক, ইয়াৰ উচ্চতা নিৰ্ধাৰণ কৰি ওপৰলৈ শিফ্ট কৰক, আৰু ই টাইলছৰ পিছফালে নাযাব বুলি নিশ্চিত কৰক।
- কাউণ্টাৰটপত এটা হব যোগ কৰককাউণ্টাৰটপটো বাছনি কৰক আৰু কাউণ্টাৰটপৰ স্তৰত স্থাপন কৰিবলৈ লাইব্ৰেৰীৰ পৰা এটা হব বাছনি কৰক।
- প্ৰতিটো ফালে কাউণ্টাৰটপ ড্ৰপ আৰু এক্সটেনশ্বন যোগ কৰকবাছনি কৰা ফালবোৰত কাউণ্টাৰটপ বঢ়াওক আৰু উচ্চতাৰ সৈতে ড্ৰপ অন কৰক, যাতে এক্সটেনশ্বনটো ডিজাইনৰ সৈতে মিলি যায়।
- কাউণ্টাৰটপ মেনুৰ পৰা কাউণ্টাৰটপৰ সামগ্ৰী আৰু ডাঠতা সলনি কৰককাউণ্টাৰটপৰ সামগ্ৰী বাছনি কৰক আৰু ইয়াৰ ডাঠতা নিৰ্ধাৰণ কৰক — হয় সামগ্ৰীৰ SKU অনুসৰণ কৰি, নাইবা নিজে এটা মান লিখি।
- চিলেকচন ট্ৰি বা ইউনিটৰ জৰিয়তে কাউণ্টাৰটপৰ সামগ্ৰী সলনি কৰকইউনিটটো বাছনি কৰি বা চিলেকচন ট্ৰি ব্যৱহাৰ কৰি, তাৰ পিছত এটা উপশ্ৰেণী আৰু এটা নিৰ্দিষ্ট সামগ্ৰী বা ৰং বাছনি কৰি কাউণ্টাৰটপৰ সামগ্ৰী সলনি কৰক।
- Edit countertop accessories at furniture levelAccessories added onto a countertop, such as a hob or sink, are handled at the Furniture/Light Unit level rather than cabinet level.
- How countertops affect displayed base unit heightLearn why adding or removing a countertop on a base unit never changes the carcass height shown for that unit.
- প্ৰপাৰ্টি পেনেলৰ পৰা কাউণ্টাৰটপ আৰু হেণ্ডেল সলনি কৰকপ্ৰপাৰ্টি পেনেলৰ পৰা সিহঁতৰ কাউণ্টাৰটপৰ সামগ্ৰী আৰু বেধ সলনি কৰিবলৈ বা সিহঁতৰ হেণ্ডেল সলাবলৈ Select units।
- Place plants on countertops manuallyPlace appliances like hobs on the countertop, but replace or position a plant manually.
- গ্ৰেনাইটৰ তলত কাউণ্টাৰটপ প্লাই যোগ কৰককাউণ্টাৰটপৰ তলত নিজৰ বেধ আৰু সামগ্ৰীসহ এটা প্লাই সমৰ্থন পেনেল যোগ কৰক, আৰু প্ৰয়োজন নহ'লে ইয়াক পুনৰ আঁতৰাই দিয়ক।
- Edit countertop and XYZ position from Quick AccessUse the Quick Access position controls to move a unit horizontally with X and Z and vertically with Y, while cabinet and shutter removal and constructional changes stay in the customize and construction options.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- Fillet or chamfer countertop cornersGive each of the four countertop corners its own rounded or chamfered edge with an entered value.
- Find the countertop brightness and glossiness settingsSelect the countertop to open its level and see which controls it offers.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.
- How a countertop side's Extension Options value includes its Countertop DropLearn how a side's Countertop Drop is added to its Extension Options value while the slab itself still runs only the set amount past the unit.
- কাউণ্টাৰটপৰ শ্বিফ্ট-আপ মান ইয়াৰ উচ্চতাৰ সৈতে মিলাওককাউণ্টাৰটপ বা বেকস্প্লেছ সঠিক উচ্চতাত ৰাখিবলৈ ইয়াৰ শ্বিফ্ট-আপ ইয়াৰ উচ্চতাৰ সৈতে মিলাই দিয়ক।
- চিংক কাউণ্টাৰত ৰাখক, ঢালু পেনেলত নহয়চিংক কেৱল গ্ৰেনাইটৰ দৰে কাউণ্টাৰত ৰাখক, আৰু ঢালু বা কোণীয়া পেনেলত এটাৰ প্ৰয়োজন হ'লে হাতেৰে সুমুৱাই দিয়া প্লাম্বিং ফিক্সচাৰ ব্যৱহাৰ কৰক।
- Position a countertop drop and backsplash on the countertopLearn how a countertop drop hangs from the underside of the countertop slab and how to set the shift so a backsplash stands exactly on the countertop.
- কাউণ্টাৰটপ পুনৰস্থাপন কৰক আৰু ইয়াৰ সন্মুখৰ প্ৰ'ফাইলৰ আকৃতি দিয়ককাউণ্টাৰটপ XYZ অক্ষৰ লগত লৈ যাওক আৰু প্ৰ'ফাইল সূচাবলৈ সন্মুখ অংশ স্থানান্তৰ আৰু সম্প্ৰসাৰণ কৰক।
- Resize or remove a sink from the selection treeChange a sink's height, width and depth, or remove it entirely, using the furniture light unit in the selection tree.
- Resize or remove sinks and hobs from the selection treeSelect a sink or hob in the selection tree to resize or delete it, since built-in appliances are managed at the countertop level.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- কেবিনেটৰ নিৰ্মাণ, স্কাৰ্টিং, কাউণ্টাৰটপ আৰু কাৰ্কাছ পেনেল কাষ্টমাইজ কৰকএটা নিৰ্বাচিত কেবিনেটত কাষ্টমাইজ টেব খোলি তাৰ নিৰ্মাণ, স্কাৰ্টিং, কাউণ্টাৰটপ আৰু কাৰ্কাছ পেনেল ছেট কৰক।
- পছন্দসমূহত শ্বাটাৰ আৰু কাউণ্টাৰটপৰ জোখ সক্ৰিয় কৰকশ্বাটাৰ আৰু কাউণ্টাৰটপৰ বাবে জোখৰ পছন্দ সক্ৰিয় কৰক, যাতে সেই অংশবোৰ বাছনি কৰিব পৰা যায় আৰু জোখ দিব পৰা যায়।
- অক্ষ আৰু কাউণ্টাৰটপ স্তৰ ব্যৱহাৰ কৰি হব আৰু ছিংক উপাদান স্থাপন কৰকXYZ অক্ষৰ সৈতে হব এটা ইয়াৰ Furniture/Light Unit স্তৰত স্থাপন কৰক আৰু কাউণ্টাৰটপ স্তৰত Sink বিকল্পৰ সৈতে ছিংক এটা যোগ কৰক।
- ড্ৰপবোৰ মজিয়াৰ ড্ৰপ বা বেকস্প্লেশ হিচাপে ব্যৱহাৰ কৰক আৰু কাউণ্টাৰটপ ওপৰলৈ তোলকড্ৰপৰ উচ্চতা আৰু শ্বিফ্ট নিৰ্ধাৰণ কৰক যাতে ই মজিয়ালৈকে পায়, টাইলিং ঢাকে, বা কাউণ্টাৰটপক প্ৰয়োজনীয় স্তৰলৈ তোলে।
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- ফ্ল' প্লেনত শ্বাটাৰ আৰু কাউণ্টাৰটপৰ জোখ লোৱাফ্ল' প্লেনত শ্বাটাৰ আৰু কাউণ্টাৰটপৰ জোখ পইণ্ট-টু-পইণ্ট বা লাইন-টু-লাইনভাৱে ল'ব পাৰি; লাইন-টু-লাইন শ্ৰেয়।
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.