カウンタートップ
ガイド:36
- コンロをカウンタートップレベルに、レンジフードを家具レベルに追加するコンロをカウンタートップに、レンジフードを家具レベルに配置し、どちらもデザイン内で正しく収まるようにします。
- Replaceボタンを使用してカウンター天板の仕上げを置き換えますカウンター天板の仕上げを変更するには、そのユニットを選択し、Replaceリストから新しいオプションを選びます。
- カウンター天板の厚みを変更しても、天板パネルは自動では変わりませんキッチン用ベースキャビネットの天板パネルが、カウンター天板の厚みを変更してもレールパネルのままになる理由を説明します。
- Modify Countertopで複数のユニットに1つのカウンタートップを適用する複数のキャビネットを選択し、ポップアップでカウンタートップの厚さと素材をまとめて設定します。
- ラミネート無垢材を使用してカウンター天板とキャビネットの素材を変更するカウンター天板を変更し、変更を適用して素材の変更を確定します。
- カウンタートップレベルの設定からバックスプラッシュを追加するバックスプラッシュはカウンタートップレベルの変更として追加し、高さを設定して上方向に移動させ、タイルの背後に回り込まないようにします。
- カウンター天板にコンロを追加するカウンター天板を選択し、ライブラリからコンロを選んでカウンター天板の高さに配置します。
- 側面ごとにカウンタートップの垂れ壁と延長を追加する選んだ側面でカウンタートップを延長し、高さを指定して垂れ壁をオンにすると、延長部分がデザインと揃います。
- Countertopメニューから天板の素材と厚さを変更します天板の素材を選び、厚さを設定します。素材のSKUに従うか、値を自分で入力します。
- Change countertop material via selection tree or unitChange a countertop's material by selecting the unit or using the selection tree, then choosing a subcategory and a specific material or colour.
- 家具レベルでカウンタートップの付属品を編集するコンロやシンクなど、カウンタートップに追加する付属品は、キャビネットレベルではなくFurniture/Light Unitレベルで扱います。
- カウンター天板が表示されるベースユニットの高さに与える影響ベースユニットにカウンター天板を追加または削除しても、そのユニットに表示されるキャーカス高さが変わらない理由を説明します。
- プロパティパネルから天板と取っ手を変更するSelect unitsで、プロパティパネルから天板の素材と厚さを変更したり、取っ手を交換したりできます。
- 植物をカウンタートップに手動で配置するPlace appliances like hobs on the countertop, but replace or position a plant manually.
- 御影石の下に天板用合板を追加する天板の下に、専用の厚みと材料を持つ合板の支持パネルを追加し、不要になったら削除できます。
- Edit countertop and XYZ position from Quick AccessUse the Quick Access position controls to move a unit horizontally with X and Z and vertically with Y, while cabinet and shutter removal and constructional changes stay in the customize and construction options.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- カウンター天板の角をフィレットまたは面取りするカウンター天板の四隅それぞれに、入力した値で丸めまたは面取りを設定できます。
- Find the countertop brightness and glossiness settingsSelect the countertop to open its level and see which controls it offers.
- How a countertop backsplash changes the slab's back extensionLearn how switching on a countertop's Back drop sets Extension Options > Back to 40 and how to bring the slab edge back to the unit's back.
- How a countertop side's Extension Options value includes its Countertop DropLearn how a side's Countertop Drop is added to its Extension Options value while the slab itself still runs only the set amount past the unit.
- カウンター天板のシフトアップ値を高さに合わせるカウンター天板またはバックスプラッシュのシフトアップを高さに合わせて設定し、正しい高さに保ちます。
- シンクは傾斜したパネルではなく、カウンターに配置してくださいシンクは御影石などのカウンターにのみ配置してください。傾斜したパネルや角度のついたパネルに必要な場合は、給排水設備を手動で挿入して使用してください。
- Position a countertop drop and backsplash on the countertopLearn how a countertop drop hangs from the underside of the countertop slab and how to set the shift so a backsplash stands exactly on the countertop.
- カウンター天板を再配置し、前面のプロファイルを成形するカウンター天板をXYZ軸に沿って移動し、前面をずらして延長することでプロファイルを表現します。
- Resize or remove a sink from the selection treeChange a sink's height, width and depth, or remove it entirely, using the furniture light unit in the selection tree.
- Resize or remove sinks and hobs from the selection treeSelect a sink or hob in the selection tree to resize or delete it, since built-in appliances are managed at the countertop level.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- キャビネットの構造、幅木、天板、胴板をカスタマイズ選択したキャビネットのカスタマイズタブを開き、構造、幅木、天板、胴板を設定します。
- 環境設定で扉とカウンター天板の寸法表示を有効にする扉とカウンター天板の寸法設定をオンにすると、これらの部品を選択できるようになり、寸法を表示できます。
- 軸とカウンタートップレベルを使用してコンロとシンクのコンポーネントを配置するコンロはFurniture/Light UnitレベルでXYZ軸を使用して配置し、シンクはカウンタートップレベルでSinkオプションを使用して追加します。
- Use drops as a floor drop or backsplash and raise the countertopSet a drop's height and shift so it reaches the floor, covers the tiling, or lifts the countertop to the required level.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- フロープランでシャッターとカウンターの寸法を記入するフロープランでは、シャッターとカウンターの寸法を点間または線間で記入できます。線間での記入を推奨します。
- Furnish a kitchen with base units, wall units, lofts and countertopsDraft the floor plan with measurements, doors and windows, then place base units, add wall units and lofts, and attach countertops to the cabinets that need them.