അളവുകളും അളക്കലും
ഗൈഡുകൾ: 66
- കൈകൊണ്ട് അളവുരേഖകൾ ചേർത്ത് ബാലൻസ് സ്ഥലം അളക്കുകതൊട്ടുനിൽക്കുന്ന ഘടകങ്ങൾക്കിടയിൽ കൈകൊണ്ട് അളവുരേഖകൾ ഇടുക, സ്ഥാപിച്ച യൂണിറ്റുകൾക്ക് ചുറ്റുമുള്ള ബാക്കി സ്ഥലം അളക്കുക.
- പ്രൊഫൈൽ ഷട്ടർ സിസ്റ്റത്തിലെ പ്രൊഫൈൽ അളവുകൾ മനസ്സിലാക്കുകപ്രൊഫൈൽ ഷട്ടർ സിസ്റ്റത്തിൽ ഓരോ പ്രൊഫൈൽ ഘടകത്തിന്റെയും സ്വന്തം Dimensions, H, D മൂല്യങ്ങൾ ആ പ്രൊഫൈലിനെയും ഗ്ലാസിനെയും എങ്ങനെ മാറ്റുന്നുവെന്ന് അറിയുക.
- ശരിയായ ഡ്രോയിംഗ് ലെയറിൽ ഓട്ടോ ഡൈമെൻഷൻ ഉപയോഗിക്കുകആദ്യം യൂണിറ്റുകൾ യോജിക്കുന്ന പ്ലാൻ ലെയറിലേക്ക് സെറ്റ് ചെയ്യുക, തുടർന്ന് എല്ലാ കാബിനറ്റ് അളവുകളും ഒരുമിച്ച് നിറയ്ക്കാൻ ഓട്ടോ ഡൈമെൻഷൻ ചേർക്കുക.
- കൂടുതൽ അളവുകൾ പാരാമീറ്ററുകളായി ചേർത്ത് അവ ഓപ്ഷനുകളായി ലഭ്യമാക്കുകഒരു ഫർണിച്ചറിൽ ഓപ്ഷനായി ലഭ്യമാകേണ്ട ഏതെങ്കിലും അധിക അളവ് Parameter-ന് കീഴിൽ ചേർത്ത ശേഷം അത് സൃഷ്ടിച്ച് ഫർണിച്ചർ അപ്ഡേറ്റ് ചെയ്യുക.
- ഓട്ടോ ഡൈമെൻഷനുകൾ ചേർക്കുക, പുനഃക്രമീകരിക്കുക, ലോക്ക് ചെയ്യുകഓട്ടോ ഡൈമെൻഷനുകൾ ചേർത്ത ശേഷം, വിട്ടുപോയവ ഡൈമെൻഷൻ ടൂൾ ഉപയോഗിച്ച് പൂരിപ്പിക്കുക, അവ പുനഃക്രമീകരിക്കുക, തുടർന്ന് വ്യൂ സെന്റർ ചെയ്ത് ലോക്ക് ചെയ്യുക.
- അളവുകൾക്കും അനോട്ടേഷനുകൾക്കും നിറക്കോഡ് നൽകുകഡ്രോയിംഗുകൾ വായിക്കാൻ എളുപ്പമാകാനും പ്രധാന ഇനങ്ങൾ വേറിട്ടു കാണാനും അളവുകൾക്കും അനോട്ടേഷനുകൾക്കും നിറങ്ങൾ നൽകുക.
- ഒരു എലവേഷനിലെ ഡൈമെൻഷൻ ലൈനുകൾ ഇല്ലാതാക്കി വീണ്ടും ക്രമീകരിക്കുകഇനി ആവശ്യമില്ലാത്ത ഒരു ഡൈമെൻഷൻ ലൈൻ നീക്കം ചെയ്യുക, തുടർന്ന് ഓട്ടോ ഡൈമെൻഷൻ ലൈനുകൾ നിങ്ങൾക്ക് വേണ്ട വരി ക്രമത്തിലേക്ക് വലിച്ചിടുക.
- സ്കെലിറ്റൺ മോഡിൽ കാബിനറ്റിനുള്ളിലെ പാർട്ടീഷനുകളുടെ അളവുകൾ രേഖപ്പെടുത്തുകആന്തരിക പാർട്ടീഷൻ അളവുകൾ ചേർക്കാൻ സ്കെലിറ്റൺ മോഡ് ഓൺ ചെയ്യുക, അല്ലെങ്കിൽ പാർട്ടീഷനുകളുടെ അളവുകൾ കൈകൊണ്ട് രേഖപ്പെടുത്തുക.
- ഡൈമെൻഷൻ മൂല്യങ്ങൾ യഥാർത്ഥ മോഡൽ അളവുകളെ എങ്ങനെ പ്രതിഫലിപ്പിക്കുന്നുഒരു ഡിസൈനിലോ എലിവേഷനിലോ ഉള്ള ഡൈമെൻഷൻ മൂല്യങ്ങൾ യഥാർത്ഥ മോഡൽ അളവുകളിൽ നിന്ന് വരുന്നത് എന്തുകൊണ്ടെന്നും Annotate-ന് കീഴിലുള്ള Align ടൂൾ ഉപയോഗിച്ച് അധിക അളവുകൾ എങ്ങനെ ചേർക്കാമെന്നും അറിയുക.
- ഡൈമെൻഷൻ ലൈനിന്റെ നിറം സാധുവായ ഒരു ഹെക്സ് മൂല്യമായി സജ്ജമാക്കുകThe dimension line colour defaults to black (#000000), so enter a valid hex value to avoid mirror or blink visuals.
- Add hatch, dimensions, text and arrow annotationsDraw a hatch rectangle, adjust its scale and apply it, then edit arrow head size, text size and text colour in the properties panel.
- Avoid overlapping entities by adjusting dimensionsClick a placed element to see its dimensions and adjust them directly so it does not push into another element.
- Choose Draw or Annotate tools for shapes, notes and dimensionsLearn which floor plan editor tools draw geometry and which add text, dimensions and leader lines, and how to set annotation styles before placing them.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Fix incorrect or missing auto dimensionsCheck the dimensioning settings and pick points carefully when auto dimensions come out wrong or absent.
- വീണ്ടും ലോഡ് ചെയ്യുമ്പോൾ ഡൈമെൻഷൻ ലൈനുകൾ എലമെന്റ് സ്നാപ്പ് പോയിന്റുകളിലേക്ക് എങ്ങനെ വീണ്ടും ആങ്കർ ചെയ്യുന്നുവീണ്ടും ലോഡ് ചെയ്യുമ്പോഴും ഒരു ഡൈമെൻഷൻ ലൈൻ ഒരു എലമെന്റിന്റെ പേരിട്ട സ്നാപ്പ് പോയിന്റുമായുള്ള ബന്ധം എങ്ങനെ നിലനിർത്തുന്നു, ആ സ്നാപ്പ് പോയിന്റ് ഇല്ലാതാകുമ്പോൾ എന്ത് സംഭവിക്കുന്നു എന്ന് അറിയുക.
- Know which dimensions each item type is checked againstLearn which measurements each hardware type compares against its limits when the carousel filters items.
- Measure a distance with the ME shortcutUse ME and pick two points to measure the distance between them.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
- Use ME E enter shortcut to measure in the designTake measurements in the design with the 'ME E enter' shortcut, for example to confirm a blind corner measurement.
- ഷട്ടർ, സ്കർട്ടിംഗ്, കാർക്കസ് അളവുകൾ കണക്കിലെടുക്കുകകാർക്കസ് കണക്കുകളിൽ ഒഴിവാക്കുന്ന ഷട്ടർ കനം, സ്കർട്ടിംഗ് ബഫർ, ഡ്രോയർ ക്ലിയറൻസ് എന്നിവയ്ക്കായി പാനൽ വലുപ്പങ്ങൾ ക്രമീകരിക്കുക.
- Change partition dimension instead of translating a shelfAdjust a cabinet by manipulating partition levels, add a shutter system at the partition level, and avoid translating a shelf so the shelf still matches the partition layout.
- പുറം അളവിൽ നിന്ന് ഷട്ടർ അളവുകൾ എങ്ങനെ കണക്കാക്കുന്നുപുറം അളവുകളിൽ നിന്ന് ഡിസൈൻ പാരാമീറ്ററുകൾ കുറച്ച് സിസ്റ്റം ഒരു ഷട്ടറിന്റെ വലുപ്പം എങ്ങനെ കണ്ടെത്തുന്നു എന്ന് അറിയുക.
- L-കോർണർ യൂണിറ്റിന്റെ അളവുകളും ഷട്ടർ ഓപ്ഷനുകളും മനസ്സിലാക്കുകFront Back, Side Back, Side Left, Side Right എന്നീ അളവുകൾ ഒരു L-കോർണർ യൂണിറ്റിന്റെ ഏതൊക്കെ മുഖങ്ങളുമായി ബന്ധപ്പെടുന്നു, അത് ഏതൊക്കെ ഷട്ടർ സിസ്റ്റങ്ങൾ വാഗ്ദാനം ചെയ്യുന്നു എന്ന് അറിയുക.
- അളവുകളോടെ ആന്തരികവും ബാഹ്യവുമായ എലിവേഷനുകൾ സൃഷ്ടിക്കുകഅളവുകൾ ഉൾക്കൊള്ളുന്ന ആന്തരികവും ബാഹ്യവുമായ എലിവേഷനുകൾ സൃഷ്ടിക്കുക; നിങ്ങൾ ജോലി ചെയ്യുമ്പോൾ സ്കെലിറ്റൺ മോഡും ഡ്യൂപ്ലിക്കേറ്റ് എലിവേഷനുകളും ലഭ്യമാണ്.
- സ്റ്റാൻഡേർഡ് ബേസ് യൂണിറ്റ് അളവുകൾ എങ്ങനെ പ്രവർത്തിക്കുന്നുഅടുക്കള മോഡലിംഗിൽ ഉപയോഗിക്കുന്ന സ്റ്റാൻഡേർഡ് ബേസ് യൂണിറ്റ് ആഴവും ഉയരവും, ആ അളവുകളിൽ ഉൾപ്പെടാത്തത് എന്തെന്നും അറിയുക.
- വാതിലിന്റെയും ജനലിന്റെയും സ്ഥാനം ഡൈമെൻഷനിൽ ക്ലിക്ക് ചെയ്ത് ക്രമീകരിക്കുകവാതിലിന്റെയോ ജനലിന്റെയോ സ്ഥാന ഡൈമെൻഷനിൽ ക്ലിക്ക് ചെയ്ത് പുതിയ മൂല്യം ടൈപ്പ് ചെയ്ത് അത് നീക്കുക, കൂടാതെ ജനലിന്റെ വീതി, ഉയരം, കനം, ഉയരം (എലിവേഷൻ) എന്നിവ സെറ്റ് ചെയ്യുക.
- ഹിഞ്ച്-ഷെൽഫ് കൂട്ടിയിടി കണ്ടെത്തലിനായി ഹിഞ്ച് അളവുകൾ ക്രമീകരിക്കുകഹിഞ്ച്-ഷെൽഫ് കൂട്ടിയിടികൾ കണ്ടെത്താൻ ഓരോ ഹിഞ്ച് തരത്തിനും വെവ്വേറെ അളവുകൾ ക്രമീകരിക്കുക.
- ഒരു എലവേഷനിൽ Align Dimension ഉപയോഗിച്ചുള്ള അളവ് യൂണിറ്റുകൾഒരു എലവേഷനിൽ ഒരു യൂണിറ്റിന്റെ കാർക്കസും പാർട്ടീഷനുകളും ഷട്ടറുകളും അവയുടെ അരികുകളിലൂടെ തിരഞ്ഞെടുത്ത്, അതേ ദിശയിൽ അളവുകൾ ചെയിൻ ചെയ്യുക.
- പാരാമെട്രിക് മൂല്യങ്ങൾ ഉപയോഗിച്ച് പാനലിന്റെയും ഷട്ടറിന്റെയും അളവുകൾ നിയന്ത്രിക്കുകപാനലിനും ഷട്ടറിനും പാരാമെട്രിക് മൂല്യം നൽകുക, അങ്ങനെ നിയന്ത്രിക്കുന്ന അളവ് മാറുമ്പോൾ അവ സ്വയമേവ വലിപ്പം മാറും.
- യൂണിറ്റിനൊപ്പം വലിപ്പം മാറാതിരിക്കാൻ ഒരു പാനലിന്റെ അളവ് സ്ഥിരമാക്കുകഒരു പാനലിന്റെ നീളം, ആഴം അല്ലെങ്കിൽ ഉയരം ഒരു സ്ഥിരമായ മൂല്യമായി സജ്ജമാക്കുക, അങ്ങനെ കാബിനറ്റോ വാർഡ്രോബോ വലിപ്പം മാറ്റുമ്പോൾ ആ പാനലിന്റെ വലിപ്പം മാറാതെ നിൽക്കും.
- നെഗറ്റീവ് ഓഫ്സെറ്റ് ഉപയോഗിച്ച് പാർട്ടീഷൻ അളവ് ക്രമീകരിച്ച് ഡ്രോയർ ഫാസിയയുടെ ഉയരം സെറ്റ് ചെയ്യുകനെഗറ്റീവ് ഓഫ്സെറ്റ് ഉപയോഗിച്ച് ഡ്രോയർ ഫാസിയയുടെ ഉയരം സെറ്റ് ചെയ്യുമ്പോൾ കാണിക്കുന്ന പാർട്ടീഷൻ ഉയരം മുഴുവൻ ഉയരത്തിൽ നിന്ന് പാനൽ കനം കുറച്ചതാണെന്ന് കാണുക.
- മുറിയുടെ അളവുകൾ കേന്ദ്രത്തിൽ നിന്നോ ഉൾഭിത്തികളിൽ നിന്നോ സജ്ജീകരിച്ച് മുറിയുടെ തരം തിരഞ്ഞെടുക്കുകമുറിയുടെ അളവുകൾ ഉൾഭിത്തി അളവുകളിലേക്ക് മാറ്റി ഒരു മുറിയുടെ തരം തിരഞ്ഞെടുക്കുക, അങ്ങനെ Insert, Furnish എന്നിവ യോജിക്കുന്ന ഫർണിച്ചറും അനുബന്ധ ഉപകരണങ്ങളും മാത്രം നൽകും.
- ഒരു ഫില്ലർ പാനലിന്റെ തരവും അളവുകളും അതിന്റെ പ്രോപ്പർട്ടികളിൽ നിന്ന് മാറ്റുകഒരു ഫില്ലർ പാനൽ തിരുത്താൻ, അതിന്റെ പ്രോപ്പർട്ടികളിൽ അതിന്റെ അളവ് എഡിറ്റ് ചെയ്യുകയോ ശരിയായ തരത്തിലുള്ള ഫില്ലർ കൊണ്ട് അത് മാറ്റിസ്ഥാപിക്കുകയോ ചെയ്യുക.
- അളവുകൾ സൃഷ്ടിക്കാൻ സ്ഥാപിച്ച വാതിലിൽ ക്ലിക്ക് ചെയ്യുകഎഡിറ്റ് ചെയ്യാൻ അതിന്റെ അളവുകൾ സ്വയമേവ സൃഷ്ടിക്കാൻ സ്ഥാപിച്ച വാതിലിൽ ക്ലിക്ക് ചെയ്യുക.
- ഷെൽഫും ലംബ ഇടങ്ങളും തുല്യമായോ കൃത്യമായ അളവനുസരിച്ചോ വിഭജിക്കുകAdd shelves ഉം ലംബങ്ങളും സ്വതവേ ഇടം തുല്യമായി വിഭജിക്കുന്നു; അല്ലെങ്കിൽ ഒരു ഇടം തിരഞ്ഞെടുത്ത് കൃത്യമായ അളവ് നൽകി അത് അസമമായി വിഭജിക്കാം.
- Shift വരി ഉപയോഗിച്ചോ നീല മൂല്യത്തിൽ ഇരട്ട-ക്ലിക്ക് ചെയ്തോ വാതിലിന്റെ അളവുകൾ എഡിറ്റ് ചെയ്യുകവാതിലിന്റെ വലുപ്പം മാറ്റാൻ അതിന്റെ Shift വരി ഉപയോഗിച്ച് നീക്കുകയോ നീല അളവ് മൂല്യത്തിൽ ഇരട്ട-ക്ലിക്ക് ചെയ്യുകയോ ചെയ്യുക.
- എക്സ്റ്റൻഷനുകളും കാബിനറ്റ് ക്രമീകരണങ്ങളും പാനലിന്റെ അളവുകളെ എങ്ങനെ നിർണ്ണയിക്കുന്നുഒരു പാനലിന്റെ ആകെ കനം അതിന്റെ കോർ മെറ്റീരിയലിൽ നിന്നും ഫിനിഷുകളിൽ നിന്നും എങ്ങനെ കണക്കാക്കുന്നു, കൂടാതെ പ്രീ-ലാമിനേറ്റഡ്, പോസ്റ്റ്-ലാമിനേറ്റഡ് കോർ മെറ്റീരിയലുകൾക്ക് ഈ കണക്കുകൂട്ടൽ എങ്ങനെ വ്യത്യാസപ്പെടുന്നു എന്ന് അറിയുക.
- ഡൈമെൻഷനുകളും അനോട്ടേഷനുകളും പൂർത്തിയാക്കിയ ശേഷം വ്യൂ ലോക്ക് ചെയ്യുകഡൈമെൻഷനുകളും അനോട്ടേഷനുകളും ചേർത്ത ശേഷം സെറ്റിംഗ്സിൽ നിന്ന് വ്യൂ വീണ്ടും ലോക്ക് ചെയ്യുക, അങ്ങനെ പൂർത്തിയായ ഡൈമെൻഷനിംഗും ഡീറ്റെയിലിംഗും അതേപടി നിലനിൽക്കും.
- നൽകിയതും കട്ട്ലിസ്റ്റ് പാനൽ അളവുകളും തമ്മിൽ താരതമ്യം ചെയ്യുകഒരു പാനലിന്റെ തിരുത്താവുന്ന അളവ്, കട്ട്ലിസ്റ്റിലേക്കും ബോർഡ് ലേയൗട്ടിലേക്കും എത്തുന്ന മൂല്യത്തിൽ നിന്ന് എന്തുകൊണ്ട് വ്യത്യാസപ്പെടുന്നു എന്ന് കാണുക.
- മതിൽ സ്ഥാനരേഖയും ടൈപ്പ് ചെയ്ത അളവുകൾ എങ്ങനെ അളക്കുന്നു എന്നതും മനസ്സിലാക്കുകസ്ഥാനരേഖ മതിലിന്റെ കനം എവിടെ വയ്ക്കുന്നു, നിങ്ങൾ ടൈപ്പ് ചെയ്യുന്ന അളവുകൾ ഏത് മുഖത്തുനിന്നാണ് അളക്കുന്നത് എന്നിവ അറിയുക.
- ആന്തരിക അളവുകൾ സ്വയമേവ ക്രമീകരിക്കാൻ കാർക്കസ് പാനൽ കനം ഫോർമുല ഉപയോഗിക്കുകകൈകൊണ്ട് കണക്കാക്കിയ ആന്തരിക അളവിനു പകരം കാർക്കസ് പാനൽ കനം അടിസ്ഥാനമാക്കി Enter a formula, ആന്തരിക ഇടം ശരിയായ മൂല്യത്തിലേക്ക് സിസ്റ്റം ക്രമീകരിക്കട്ടെ.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Align dimension ഉപയോഗിച്ച് മുറിതോറും അരികിൽ നിന്ന് അരികിലേക്ക് അളവുകൾ ചേർക്കുകഅരികിൽ നിന്ന് അരികിലേക്ക് അളക്കുന്ന Align dimension ഉപയോഗിച്ച് ഒരു സമയത്ത് ഒരു മുറി വീതം അളവുകൾ ചേർത്ത്, നിങ്ങൾ തിരഞ്ഞെടുക്കുന്ന ലെയറിൽ അവ സ്ഥാപിക്കുക.
- Change a door model and position it by editing its dimensionSelect the door tool to see its height, width, thickness and model in the properties bar.
- Change a wall's length by editing its dimension valueSelect a wall and type a new dimension value to redraw it as a straight wall at the length you set.
- കൃത്യമായ അളവുകളോടെ 2D ഫ്ലോർ പ്ലാനിൽ ഭിത്തികൾ വരയ്ക്കുകഉയരവും കനവും നൽകി, തുടർന്ന് ക്ലിക്ക് ചെയ്ത് കൃത്യമായ നീളങ്ങൾ ടൈപ്പ് ചെയ്ത് 2D ഫ്ലോർ പ്ലാനിൽ ഭിത്തികൾ വരയ്ക്കുക.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- മുറിയുടെ അളവുകൾ എങ്ങനെയാണ് അളക്കുന്നത്മുറിയുടെ അളവുകൾ ഏത് ഭിത്തിയുടെ ഉപരിതലത്തിൽ നിന്നാണ് അളക്കുന്നതെന്നും അളവിന്റെ റഫറൻസ് എങ്ങനെ മാറ്റാമെന്നും അറിയുക.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- അളവുകൾ സജ്ജീകരിച്ചതിന് ശേഷം അവ നിലനിർത്താൻ എലിവേഷൻ കാഴ്ചകൾ ലോക്ക് ചെയ്യുകഅളവുകൾ ചേർത്ത് പേര് നൽകിയതിന് ശേഷം ഒരു എലിവേഷൻ കാഴ്ച ലോക്ക് ചെയ്യുക, അങ്ങനെ ഫ്ലോർ പ്ലാനിലേക്കോ 3D-യിലേക്കോ മാറുമ്പോൾ അതിന്റെ ക്രമീകരണങ്ങൾ നിലനിൽക്കും.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a window with configurable dimensionsPlace a window the same way you place a door, then set its dimensions to a standard size such as 800, 850 or 900.
- ഉയരവും അളവുകളും അനുസരിച്ച് നിരകൾ സ്ഥാപിക്കുകഒരു നിരയുടെ ഉയരവും അളവുകളും നിർവചിച്ച ശേഷം, അത് ഒരു ചുമരിനുള്ളിലോ ഒരു മൂലയിലോ സ്ഥാപിക്കുക.
- Set modular furniture size via quick access dimensionsChange the size of a placed modular furniture model by updating its quick access dimensions.
- Set room inner dimensions and wall height before designingSet the left wall height and thickness and name the room so it is identifiable in the project before you start designing.
- Set the wall location line to match the dimension typeMatch the wall location line to the dimension you need so outer-to-outer, inner-to-inner and centre-to-centre values measure from the intended face.
- Show room dimensions and rename rooms on the planTurn on the Label / Show option in a room's properties so its dimensions appear on the plan, and rename rooms from the same area or by clicking inside them.
- Understand an L-corner unit's dimensions and arm changesLearn which dimensions a placed L-corner unit reports and what happens to its arms and cutouts when you change them.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.