মাত্ৰা আৰু জোখ
গাইড: 66
- হাতে মাপ যোগ কৰক আৰু ভাৰসাম্য স্থান জোখকস্পৰ্শ কৰি থকা উপাদানসমূহৰ মাজত হাতেৰে মাপ ৰাখক আৰু স্থাপন কৰা ইউনিটসমূহৰ চাৰিওফালৰ বাকী থকা স্থান জোখক।
- প্ৰ'ফাইল শ্বাটাৰ ব্যৱস্থাত প্ৰ'ফাইলৰ জোখ-মাখ বুজি লওকপ্ৰ'ফাইল শ্বাটাৰ ব্যৱস্থাত প্ৰতিটো প্ৰ'ফাইল উপাদানৰ নিজৰ Dimensions, H আৰু D মানে সেই প্ৰ'ফাইল আৰু গ্লাছ কেনেকৈ সলনি কৰে, শিকি লওক।
- সঠিক ড্ৰয়িং লেয়াৰত অটো ডাইমেনচন ব্যৱহাৰ কৰকপ্ৰথমে এককসমূহ মিল থকা প্লেন লেয়াৰত ছেট কৰক, তাৰ পিছত অটো ডাইমেনচন যোগ কৰি একে সময়তে প্ৰতিটো কেবিনেটৰ ডাইমেনচন পূৰণ কৰক।
- অতিৰিক্ত পৰিমাণসমূহক পেৰামিটাৰ হিচাপে যোগ কৰি সেইবোৰক বিকল্প হিচাপে উন্মোচন কৰকParameter-ৰ অধীনত আপুনি ফাৰ্নিচাৰত বিকল্প হিচাপে উপলব্ধ কৰিব বিচৰা যিকোনো অতিৰিক্ত পৰিমাণ যোগ কৰক, তাৰ পিছত ইয়াক সৃষ্টি কৰি ফাৰ্নিচাৰ আপডেট কৰক।
- স্বয়ংক্ৰিয় জোখ যোগ কৰক, পুনৰ সজাওক আৰু লক কৰকস্বয়ংক্ৰিয় জোখ যোগ কৰাৰ পিছত, জোখ সঁজুলিৰে অনুপস্থিত জোখবোৰ পূৰণ কৰক, সেইবোৰ পুনৰ সজাওক, তাৰ পিছত দৃশ্য কেন্দ্ৰীভূত কৰি লক কৰক।
- মাপ আৰু টীকাসমূহক ৰঙৰ কোড দিয়কমাপ আৰু টীকাসমূহক ৰং দিয়ক যাতে ড্ৰয়িংসমূহ পঢ়িবলৈ সহজ হয় আৰু গুৰুত্বপূৰ্ণ বস্তুবোৰ স্পষ্টকৈ দেখা যায়।
- এলিভেচনত ডাইমেনচন ৰেখা মচি পেলাওক আৰু পুনৰ ক্ৰমত সজাওকআপুনি আৰু প্ৰয়োজন নোহোৱা ডাইমেনচন ৰেখা এটা আঁতৰাওক, তাৰ পিছত অটো ডাইমেনচন ৰেখাবোৰ আপুনি বিচৰা শাৰী ক্ৰমলৈ টানক।
- স্কেলিটন ম’ডত কেবিনেটৰ ভিতৰৰ পাৰ্টিচনসমূহৰ মাপ দিয়কভিতৰৰ পাৰ্টিচনৰ মাপ যোগ কৰিবলৈ স্কেলিটন ম’ড অন কৰক, বা ইয়াৰ পৰিৱৰ্তে হাতেৰে পাৰ্টিচনসমূহৰ মাপ দিয়ক।
- পৰিমাপৰ মানে কেনেকৈ প্ৰকৃত মডেলৰ পৰিমাপ প্ৰতিফলিত কৰেএখন ডিজাইন বা elevation-ত পৰিমাপৰ মান কিয় প্ৰকৃত মডেলৰ পৰিমাপৰ পৰা আহে আৰু Annotate-ৰ অধীনত Align সঁজুলিৰে কেনেকৈ অতিৰিক্ত জোখ যোগ কৰিব পাৰি, সেয়া জানক।
- ডাইমেনচন ৰেখাৰ ৰং এটা বৈধ হেক্স মানলৈ ছেট কৰকডাইমেনচন ৰেখাৰ ৰং অবিকল্পিতভাৱে ক’লা (#000000) হয়, সেয়ে মিৰৰ বা ব্লিংক দৃশ্য এৰাবলৈ এটা বৈধ হেক্স মান দিয়ক।
- Add hatch, dimensions, text and arrow annotationsDraw a hatch rectangle, adjust its scale and apply it, then edit arrow head size, text size and text colour in the properties panel.
- Avoid overlapping entities by adjusting dimensionsClick a placed element to see its dimensions and adjust them directly so it does not push into another element.
- Choose Draw or Annotate tools for shapes, notes and dimensionsLearn which floor plan editor tools draw geometry and which add text, dimensions and leader lines, and how to set annotation styles before placing them.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Fix incorrect or missing auto dimensionsCheck the dimensioning settings and pick points carefully when auto dimensions come out wrong or absent.
- পুনৰ লোড হ'লত মাত্ৰা ৰেখাই কেনেকৈ উপাদানৰ স্নেপ পইণ্টত পুনৰ সংযুক্ত হয়মাত্ৰা ৰেখাই কেনেকৈ উপাদানৰ নাম দিয়া স্নেপ পইণ্টৰ সৈতে সংযোগ বজাই ৰাখে পুনৰ লোডৰ মাজেৰে, আৰু সেই স্নেপ পইণ্ট নোহোৱা হ'লে কি হয়, শিকক।
- Know which dimensions each item type is checked againstLearn which measurements each hardware type compares against its limits when the carousel filters items.
- Measure a distance with the ME shortcutUse ME and pick two points to measure the distance between them.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
- Use ME E enter shortcut to measure in the designTake measurements in the design with the 'ME E enter' shortcut, for example to confirm a blind corner measurement.
- শ্বাটাৰ, স্কাৰ্টিং আৰু কাৰ্কাছৰ জোখৰ হিচাপ ৰাখকশ্বাটাৰৰ ডাঠ, স্কাৰ্টিং বাফাৰ আৰু ড্ৰয়াৰৰ খালী ঠাইৰ বাবে পেনেলৰ জোখ সমন্বয় কৰক, যিবোৰ কাৰ্কাছৰ সংখ্যাত ধৰা নহয়।
- শেলফ অনুবাদ নকৰি পাৰ্টিশ্যনৰ জোখ সলনি কৰকপাৰ্টিশ্যন লেভেলসমূহ পৰিবৰ্তন কৰি কেবিনেট এটা সমন্বয় কৰক, পাৰ্টিশ্যন লেভেলত শাটাৰ ব্যৱস্থা যোগ কৰক, আৰু শেলফ অনুবাদ নকৰিব যাতে শেলফটোৱে পাৰ্টিশ্যনৰ বিন্যাসৰ সৈতে মিলি থাকে।
- বাহিৰৰ জোখৰ পৰা শ্বাটাৰৰ জোখ কেনেকৈ গণনা কৰা হয়বাহিৰৰ জোখৰ পৰা ডিজাইনৰ পেৰামিটাৰ বিয়োগ কৰি ছিষ্টেমে শ্বাটাৰৰ জোখ কেনেকৈ উলিয়ায়, সেয়া জানক।
- L-কৰ্ণাৰ ইউনিটৰ জোখ আৰু শ্বাটাৰৰ বিকল্পসমূহ বুজি লওকFront Back, Side Back, Side Left আৰু Side Right জোখসমূহে L-কৰ্ণাৰ ইউনিটৰ কোনটো ফে'চত কেনেকৈ মিলে আৰু ইয়াত কি কি শ্বাটাৰ ব্যৱস্থা আছে, সেয়া শিকি লওক।
- পৰিমাপসহ আভ্যন্তৰীণ আৰু বাহ্যিক elevation সৃষ্টি কৰকপৰিমাপযুক্ত আভ্যন্তৰীণ আৰু বাহ্যিক elevation সৃষ্টি কৰক; কাম কৰি থাকোঁতে skeleton mode আৰু duplicate elevation উপলব্ধ।
- ষ্টেণ্ডাৰ্ড বেছ ইউনিটৰ জোখ-মাখ কেনেকৈ কাম কৰেৰান্ধনীঘৰ মডেলিঙত ব্যৱহৃত ষ্টেণ্ডাৰ্ড বেছ ইউনিটৰ গভীৰতা আৰু উচ্চতা শিকক, আৰু সেই জোখবোৰে কি বাদ দিয়ে।
- পৰিমাপত ক্লিক কৰি দুৱাৰ আৰু খিৰিকীৰ অৱস্থান সমন্বয় কৰকদুৱাৰ বা খিৰিকীৰ অৱস্থান পৰিমাপত ক্লিক কৰি নতুন মান টাইপ কৰি ইয়াক স্থানান্তৰ কৰক, আৰু খিৰিকীৰ প্ৰস্থ, উচ্চতা, বেধ আৰু উচ্চতা নিৰ্ধাৰণ কৰক।
- হিঞ্জ-শেল্ফৰ সংঘৰ্ষ চনাক্তকৰণৰ বাবে হিঞ্জৰ জোখ কনফিগাৰ কৰকহিঞ্জ-শেল্ফৰ সংঘৰ্ষ চনাক্ত কৰিব পৰাকৈ প্ৰতিটো হিঞ্জৰ প্ৰকাৰৰ বাবে জোখ পৃথকে পৃথকে কনফিগাৰ কৰক।
- Align Dimension ৰ সৈতে elevation ত dimension ৰ এককelevation ত একেটা দিশত unit এটাৰ carcass, partitions আৰু shutters ৰ কাষেৰে বাছি লৈ dimension চেইন কৰক।
- পেৰামেট্ৰিক মানৰ সৈতে পেনেল আৰু শ্বাটাৰৰ জোখ পৰিচালনা কৰকপেনেল আৰু শ্বাটাৰৰ জোখক পেৰামেট্ৰিক মান দিয়ক, যাতে চালক জোখ সলনি হ'লে সেয়া স্বয়ংক্ৰিয়ভাৱে পুনৰ জোখ হয়।
- ইউনিটৰ সৈতে আকাৰ সলনি হোৱা বন্ধ কৰিবলৈ এখন পেনেলৰ জোখ স্থিৰ কৰকএখন পেনেলৰ দীঘ, গভীৰতা বা উচ্চতা এটা স্থিৰ মানলৈ ছেট কৰক, যাতে কেবিনেট বা ৱাৰড্ৰবৰ আকাৰ সলনি কৰিলেও সেই পেনেলৰ জোখ অপৰিৱৰ্তিত থাকে।
- ঋণাত্মক অফছেটেৰে partition dimension সলনি কৰি drawer fascia ৰ উচ্চতা নিৰ্ধাৰণ কৰকঋণাত্মক অফছেটেৰে drawer fascia ৰ উচ্চতা নিৰ্ধাৰণ কৰিলে দেখুওৱা partition ৰ উচ্চতা কেনেকৈ সম্পূৰ্ণ উচ্চতাৰ পৰা panel ৰ বেধ বিয়োগ কৰি পোৱা হয়, সেয়া চাওক।
- কক্ষৰ জোখ কেন্দ্ৰ বা ভিতৰৰ বেৰৰ পৰা নিৰ্ধাৰণ কৰক আৰু কক্ষৰ প্ৰকাৰ বাছনি কৰককক্ষৰ জোখ ভিতৰৰ বেৰৰ জোখলৈ সলনি কৰক আৰু কক্ষৰ প্ৰকাৰ বাছনি কৰক, যাতে Insert আৰু Furnish-এ কেৱল মিলা ফাৰ্নিচাৰ আৰু accessories আগবঢ়ায়।
- ইয়াৰ প্ৰপাৰ্টিৰ পৰা এটা ফিলাৰ পেনেলৰ প্ৰকাৰ আৰু জোখ সলনি কৰকইয়াৰ প্ৰপাৰ্টিত জোখ সম্পাদনা কৰি বা সঠিক প্ৰকাৰৰ ফিলাৰেৰে সলনি কৰি এটা ফিলাৰ পেনেল শুধৰাওক।
- স্থাপন কৰা দুৱাৰত ক্লিক কৰক ইয়াৰ জোখসমূহ সৃষ্টি কৰিবলৈস্থাপন কৰা দুৱাৰত ক্লিক কৰক সম্পাদনাৰ বাবে ইয়াৰ জোখসমূহ স্বয়ংক্ৰিয়ভাৱে সৃষ্টি কৰিবলৈ।
- শেলফ আৰু উলম্ব স্থানসমূহ সমানে বা সঠিক জোখ অনুসৰি ভাগ কৰকAdd shelves আৰু উলম্বসমূহে ডিফল্টভাৱে স্থান সমানে ভাগ কৰে, বা এটা স্থান বাছি লৈ সঠিক জোখ দি তাক অসমভাৱে ভাগ কৰিব পাৰে।
- Edit door dimensions by shift method or double-clicking the blue valueMove a door with its Shift row or double-click the blue dimension value to resize it.
- How panel dimensions are driven by extensions and cabinet adjustmentsLearn how a panel's total thickness is calculated from its core and finishes, and how that calculation differs for pre-laminated and post-laminated core materials.
- পৰিমাপ আৰু টীকা সম্পূৰ্ণ কৰাৰ পিছত দৃশ্য লক কৰকপৰিমাপ আৰু টীকা যোগ কৰাৰ পিছত ছেটিংছৰ পৰা দৃশ্যটো পুনৰ লক কৰক, যাতে সম্পূৰ্ণ হোৱা পৰিমাপ আৰু বিৱৰণ ঠাইতে থাকে।
- দাখিল কৰা আৰু কাটলিষ্ট পেনেলৰ জোখ পঢ়কএটা পেনেলৰ সম্পাদনযোগ্য জোখ কাটলিষ্ট আৰু বৰ্ড লে-আউটত পোৱা মানৰ পৰা কিয় বেলেগ হয় চাওক।
- দেৱালৰ অৱস্থান ৰেখা আৰু টাইপ কৰা জোখ কেনেকৈ মাপা হয় তাক বুজি লওকঅৱস্থান ৰেখাই দেৱালৰ ডাঠতা কেনেকৈ স্থাপন কৰে আৰু আপুনি টাইপ কৰা জোখ কোনটো মুখৰ পৰা মাপা হয় তাক জানি লওক।
- কাৰ্কাছ পেনেলৰ বেধৰ সূত্ৰ ব্যৱহাৰ কৰি আভ্যন্তৰীণ জোখ স্বয়ংক্ৰিয়ভাৱে সমন্বয় কৰকহাতেৰে গণনা কৰা আভ্যন্তৰীণ জোখৰ পৰিৱৰ্তে কাৰ্কাছ পেনেলৰ বেধৰ ওপৰত ভিত্তি কৰি Enter a formula কৰক, আৰু ছিষ্টেমে আভ্যন্তৰীণ স্থানটো শুদ্ধ মানলৈ সমন্বয় কৰিবলৈ দিয়ক।
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Align dimension ৰ সহায়ত ৰুমে ৰুমে এজৰ পৰা এজলৈ জোখ দিয়কAlign dimension ৰ সহায়ত এটা সময়ত এটা ৰুমত জোখ দিয়ক, যিয়ে এজৰ পৰা এজলৈ জোখে, আৰু আপুনি বাছনি কৰা স্তৰত (layer) সেইবোৰ ৰাখক।
- Change a door model and position it by editing its dimensionSelect the door tool to see its height, width, thickness and model in the properties bar.
- Change a wall's length by editing its dimension valueSelect a wall and type a new dimension value to redraw it as a straight wall at the length you set.
- 2D মজিয়া প্লেনত সঠিক জোখৰ সৈতে ৱাল আঁককউচ্চতা আৰু ডাঠতা দি, তাৰ পিছত ক্লিক কৰি সঠিক দৈৰ্ঘ্য টাইপ কৰি 2D মজিয়া প্লেনত ৱাল আঁকক।
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- কোঠাৰ জোখবোৰ কেনেকৈ মাপা হয়কোঠাৰ জোখবোৰ দেৱালৰ কোনটো পৃষ্ঠৰ পৰা মাপা হয় আৰু মাপৰ ৰেফাৰেন্স কেনেকৈ সলনি কৰিব লাগে শিকক।
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- পৰিমাপ নিৰ্ধাৰণ কৰাৰ পিছত elevation view লক কৰি সেইবোৰ সংৰক্ষণ কৰকপৰিমাপ যোগ কৰি আৰু নাম দি এটা elevation view লক কৰক, যাতে floor plan বা 3D লৈ সলনি কৰিলেও ইয়াৰ ছেটিংছ থাকে।
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a window with configurable dimensionsPlace a window the same way you place a door, then set its dimensions to a standard size such as 800, 850 or 900.
- উচ্চতা আৰু মাত্ৰাৰ দ্বাৰা স্তম্ভ স্থাপন কৰকএটা স্তম্ভৰ উচ্চতা আৰু মাত্ৰা নিৰ্ধাৰণ কৰক, তাৰ পিছত ইয়াক এখন দেৱালৰ ভিতৰত বা এটা কোণত স্থাপন কৰক।
- Set modular furniture size via quick access dimensionsChange the size of a placed modular furniture model by updating its quick access dimensions.
- Set room inner dimensions and wall height before designingSet the left wall height and thickness and name the room so it is identifiable in the project before you start designing.
- Set the wall location line to match the dimension typeMatch the wall location line to the dimension you need so outer-to-outer, inner-to-inner and centre-to-centre values measure from the intended face.
- Show room dimensions and rename rooms on the planTurn on the Label / Show option in a room's properties so its dimensions appear on the plan, and rename rooms from the same area or by clicking inside them.
- Understand an L-corner unit's dimensions and arm changesLearn which dimensions a placed L-corner unit reports and what happens to its arms and cutouts when you change them.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.