ਮਾਪ ਅਤੇ ਮਾਪਣਾ
ਗਾਈਡਾਂ: 66
- ਹੱਥੀਂ ਮਾਪ-ਰੇਖਾਵਾਂ ਜੋੜੋ ਅਤੇ ਸੰਤੁਲਨ ਥਾਂ ਮਾਪੋਇੱਕ ਦੂਜੇ ਨਾਲ ਛੂਹ ਰਹੇ ਤੱਤਾਂ ਵਿਚਕਾਰ ਹੱਥੀਂ ਮਾਪ-ਰੇਖਾਵਾਂ ਰੱਖੋ ਅਤੇ ਰੱਖੀਆਂ ਇਕਾਈਆਂ ਦੁਆਲੇ ਬਚੀ ਥਾਂ ਮਾਪੋ।
- ਪ੍ਰੋਫਾਈਲ ਸ਼ਟਰ ਸਿਸਟਮ ਵਿੱਚ ਪ੍ਰੋਫਾਈਲ ਮਾਪਾਂ ਨੂੰ ਸਮਝੋLearn how each profile element's own Dimensions, H and D values change that profile and the glass in a profile shutter system.
- ਸਹੀ ਡਰਾਇੰਗ ਲੇਅਰ 'ਤੇ ਆਟੋ ਡਾਇਮੈਨਸ਼ਨ ਵਰਤੋਪਹਿਲਾਂ ਯੂਨਿਟਾਂ ਨੂੰ ਮੇਲ ਖਾਂਦੀ ਪਲਾਨ ਲੇਅਰ 'ਤੇ ਸੈੱਟ ਕਰੋ, ਫਿਰ ਇੱਕੋ ਵਾਰ ਹਰ ਕੈਬਿਨੇਟ ਡਾਇਮੈਨਸ਼ਨ ਭਰਨ ਲਈ ਆਟੋ ਡਾਇਮੈਨਸ਼ਨ ਸ਼ਾਮਲ ਕਰੋ।
- ਵਾਧੂ ਮਾਪਾਂ ਨੂੰ ਪੈਰਾਮੀਟਰ ਵਜੋਂ ਸ਼ਾਮਲ ਕਰੋ ਤਾਂ ਜੋ ਉਹ ਵਿਕਲਪ ਵਜੋਂ ਦਿਖਾਈ ਦੇਣਜੋ ਵੀ ਵਾਧੂ ਮਾਪ ਤੁਸੀਂ ਫਰਨੀਚਰ ਉੱਤੇ ਵਿਕਲਪ ਵਜੋਂ ਉਪਲਬਧ ਕਰਵਾਉਣਾ ਚਾਹੁੰਦੇ ਹੋ, ਉਹ Parameter ਹੇਠਾਂ ਸ਼ਾਮਲ ਕਰੋ, ਫਿਰ ਇਸਨੂੰ ਬਣਾਓ ਅਤੇ ਫਰਨੀਚਰ ਨੂੰ ਅੱਪਡੇਟ ਕਰੋ।
- ਆਟੋ ਮਾਪ ਜੋੜੋ, ਮੁੜ-ਵਿਵਸਥਿਤ ਕਰੋ ਅਤੇ ਲਾਕ ਕਰੋਆਟੋ ਮਾਪ ਜੋੜਨ ਤੋਂ ਬਾਅਦ, ਗੁੰਮ ਹੋਏ ਮਾਪਾਂ ਨੂੰ ਮਾਪ ਟੂਲ ਨਾਲ ਭਰੋ, ਉਹਨਾਂ ਨੂੰ ਮੁੜ-ਵਿਵਸਥਿਤ ਕਰੋ, ਫਿਰ ਵਿਊ ਨੂੰ ਕੇਂਦਰਿਤ ਕਰੋ ਅਤੇ ਲਾਕ ਕਰੋ।
- ਮਾਪਾਂ ਅਤੇ ਟਿੱਪਣੀਆਂ ਨੂੰ ਰੰਗ-ਕੋਡ ਕਰੋਮਾਪਾਂ ਅਤੇ ਟਿੱਪਣੀਆਂ ਨੂੰ ਰੰਗ ਦਿਓ ਤਾਂ ਜੋ ਡਰਾਇੰਗਾਂ ਪੜ੍ਹਨੀਆਂ ਸੌਖੀਆਂ ਹੋਣ ਅਤੇ ਜ਼ਰੂਰੀ ਚੀਜ਼ਾਂ ਉਭਰ ਕੇ ਦਿਸਣ।
- ਐਲੀਵੇਸ਼ਨ ਉੱਤੇ ਡਾਇਮੈਨਸ਼ਨ ਲਾਈਨਾਂ ਨੂੰ ਮਿਟਾਓ ਅਤੇ ਮੁੜ ਕ੍ਰਮਬੱਧ ਕਰੋਉਹ ਡਾਇਮੈਨਸ਼ਨ ਲਾਈਨ ਹਟਾਓ ਜਿਸਦੀ ਤੁਹਾਨੂੰ ਹੁਣ ਲੋੜ ਨਹੀਂ ਹੈ, ਫਿਰ ਆਟੋ ਡਾਇਮੈਨਸ਼ਨ ਲਾਈਨਾਂ ਨੂੰ ਲੋੜੀਂਦੇ ਕਤਾਰ ਕ੍ਰਮ ਵਿੱਚ ਖਿੱਚੋ।
- ਸਕੈਲੀਟਨ ਮੋਡ ਨਾਲ ਕੈਬਿਨੈਟ ਦੇ ਅੰਦਰੂਨੀ ਪਾਰਟੀਸ਼ਨਾਂ ਦਾ ਮਾਪਅੰਦਰੂਨੀ ਪਾਰਟੀਸ਼ਨਾਂ ਦੇ ਮਾਪ ਜੋੜਨ ਲਈ ਸਕੈਲੀਟਨ ਮੋਡ ਚਾਲੂ ਕਰੋ, ਜਾਂ ਪਾਰਟੀਸ਼ਨਾਂ ਦਾ ਮਾਪ ਹੱਥ ਨਾਲ ਲਓ।
- ਮਾਪ ਦੇ ਮੁੱਲ ਅਸਲ ਮਾਡਲ ਮਾਪਾਂ ਨੂੰ ਕਿਵੇਂ ਦਰਸਾਉਂਦੇ ਹਨਜਾਣੋ ਕਿ ਡਿਜ਼ਾਈਨ ਜਾਂ ਐਲੀਵੇਸ਼ਨ ਵਿੱਚ ਮਾਪ ਦੇ ਮੁੱਲ ਅਸਲ ਮਾਡਲ ਮਾਪਾਂ ਤੋਂ ਕਿਉਂ ਆਉਂਦੇ ਹਨ ਅਤੇ Annotate ਹੇਠ Align ਟੂਲ ਨਾਲ ਵਾਧੂ ਮਾਪ ਕਿਵੇਂ ਜੋੜੇ ਜਾਂਦੇ ਹਨ।
- ਡਾਇਮੈਨਸ਼ਨ ਲਾਈਨ ਦਾ ਰੰਗ ਇੱਕ ਵੈਧ ਹੈਕਸ ਮੁੱਲ ਤੇ ਸੈੱਟ ਕਰੋਡਾਇਮੈਨਸ਼ਨ ਲਾਈਨ ਦਾ ਰੰਗ ਡਿਫਾਲਟ ਰੂਪ ਵਿੱਚ ਕਾਲਾ (#000000) ਹੁੰਦਾ ਹੈ, ਇਸ ਲਈ ਸ਼ੀਸ਼ੇ ਜਾਂ ਝਪਕਣ ਵਾਲੇ ਦ੍ਰਿਸ਼ਾਂ ਤੋਂ ਬਚਣ ਲਈ ਇੱਕ ਵੈਧ ਹੈਕਸ ਮੁੱਲ ਦਰਜ ਕਰੋ।
- Add hatch, dimensions, text and arrow annotationsDraw a hatch rectangle, adjust its scale and apply it, then edit arrow head size, text size and text colour in the properties panel.
- Avoid overlapping entities by adjusting dimensionsClick a placed element to see its dimensions and adjust them directly so it does not push into another element.
- Choose Draw or Annotate tools for shapes, notes and dimensionsLearn which floor plan editor tools draw geometry and which add text, dimensions and leader lines, and how to set annotation styles before placing them.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Fix incorrect or missing auto dimensionsCheck the dimensioning settings and pick points carefully when auto dimensions come out wrong or absent.
- ਰੀਲੋਡ 'ਤੇ ਡਾਇਮੈਨਸ਼ਨ ਲਾਈਨਾਂ ਐਲੀਮੈਂਟ ਸਨੈਪ ਪੁਆਇੰਟਾਂ ਨਾਲ ਕਿਵੇਂ ਦੁਬਾਰਾ ਜੁੜਦੀਆਂ ਹਨਜਾਣੋ ਕਿ ਇੱਕ ਡਾਇਮੈਨਸ਼ਨ ਲਾਈਨ ਰੀਲੋਡਾਂ ਦੌਰਾਨ ਐਲੀਮੈਂਟ ਦੇ ਨਾਮ ਵਾਲੇ ਸਨੈਪ ਪੁਆਇੰਟ ਨਾਲ ਆਪਣਾ ਜੁੜਾਅ ਕਿਵੇਂ ਬਣਾਈ ਰੱਖਦੀ ਹੈ, ਅਤੇ ਜਦੋਂ ਉਹ ਸਨੈਪ ਪੁਆਇੰਟ ਗਾਇਬ ਹੋ ਜਾਂਦਾ ਹੈ ਤਾਂ ਕੀ ਹੁੰਦਾ ਹੈ।
- ਜਾਣੋ ਕਿ ਹਰ ਆਈਟਮ ਕਿਸ ਕਿਸਮ ਦੇ ਮਾਪਾਂ ਦੇ ਆਧਾਰ 'ਤੇ ਜਾਂਚੀ ਜਾਂਦੀ ਹੈਜਾਣੋ ਕਿ ਕੈਰੋਸਲ ਦੁਆਰਾ ਆਈਟਮਾਂ ਫਿਲਟਰ ਕਰਦੇ ਸਮੇਂ ਹਰ ਹਾਰਡਵੇਅਰ ਕਿਸਮ ਆਪਣੀਆਂ ਸੀਮਾਵਾਂ ਨਾਲ ਕਿਹੜੇ ਮਾਪ ਤੁਲਨਾ ਕਰਦੀ ਹੈ।
- Measure a distance with the ME shortcutUse ME and pick two points to measure the distance between them.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
- Use ME E enter shortcut to measure in the designTake measurements in the design with the 'ME E enter' shortcut, for example to confirm a blind corner measurement.
- ਸ਼ਟਰ, ਸਕਰਟਿੰਗ ਅਤੇ ਕਾਰਕਾਸ ਦੇ ਮਾਪਾਂ ਦਾ ਹਿਸਾਬ ਰੱਖੋਪੈਨਲਾਂ ਦੇ ਆਕਾਰ ਸ਼ਟਰ ਦੀ ਮੋਟਾਈ, ਸਕਰਟਿੰਗ ਬਫਰ ਅਤੇ ਦਰਾਜ਼ ਦੀ ਖਾਲੀ ਥਾਂ ਲਈ ਬਦਲੋ, ਜੋ ਕਾਰਕਾਸ ਦੇ ਅੰਕੜਿਆਂ ਵਿੱਚ ਸ਼ਾਮਲ ਨਹੀਂ ਹਨ।
- ਸ਼ੈਲਫ਼ ਨੂੰ ਟ੍ਰਾਂਸਲੇਟ ਕਰਨ ਦੀ ਥਾਂ ਪਾਰਟੀਸ਼ਨ ਦਾ ਮਾਪ ਬਦਲੋਪਾਰਟੀਸ਼ਨ ਲੈਵਲ ਬਦਲ ਕੇ ਕੈਬਿਨੈਟ ਨੂੰ ਵਿਵਸਥਿਤ ਕਰੋ, ਪਾਰਟੀਸ਼ਨ ਲੈਵਲ ਉੱਤੇ ਸ਼ਟਰ ਸਿਸਟਮ ਜੋੜੋ, ਅਤੇ ਸ਼ੈਲਫ਼ ਨੂੰ ਟ੍ਰਾਂਸਲੇਟ ਕਰਨ ਤੋਂ ਬਚੋ ਤਾਂ ਜੋ ਸ਼ੈਲਫ਼ ਪਾਰਟੀਸ਼ਨ ਲੇਆਉਟ ਨਾਲ ਮੇਲ ਖਾਂਦੀ ਰਹੇ।
- ਬਾਹਰੀ ਮਾਪ ਤੋਂ ਸ਼ਟਰ ਦੇ ਮਾਪ ਕਿਵੇਂ ਕੱਢੇ ਜਾਂਦੇ ਹਨਜਾਣੋ ਕਿ ਸਿਸਟਮ ਬਾਹਰੀ ਮਾਪਾਂ ਵਿੱਚੋਂ ਡਿਜ਼ਾਈਨ ਪੈਰਾਮੀਟਰ ਘਟਾ ਕੇ ਸ਼ਟਰ ਦਾ ਮਾਪ ਕਿਵੇਂ ਕੱਢਦਾ ਹੈ।
- L-ਕੋਨੇ ਵਾਲੀ ਯੂਨਿਟ ਦੇ ਮਾਪ ਅਤੇ ਸ਼ਟਰ ਵਿਕਲਪ ਸਮਝੋਜਾਣੋ ਕਿ Front Back, Side Back, Side Left ਅਤੇ Side Right ਮਾਪ L-ਕੋਨੇ ਵਾਲੀ ਯੂਨਿਟ ਦੇ ਕਿਹੜੇ ਪਾਸਿਆਂ ਨਾਲ ਮੇਲ ਖਾਂਦੇ ਹਨ ਅਤੇ ਇਹ ਕਿਹੜੇ ਸ਼ਟਰ ਸਿਸਟਮ ਦਿੰਦੀ ਹੈ।
- ਮਾਪਾਂ ਨਾਲ ਅੰਦਰੂਨੀ ਅਤੇ ਬਾਹਰੀ ਐਲੀਵੇਸ਼ਨ ਤਿਆਰ ਕਰੋਮਾਪਾਂ ਵਾਲੇ ਅੰਦਰੂਨੀ ਅਤੇ ਬਾਹਰੀ ਐਲੀਵੇਸ਼ਨ ਤਿਆਰ ਕਰੋ; ਕੰਮ ਕਰਦੇ ਸਮੇਂ skeleton mode ਅਤੇ ਡੁਪਲੀਕੇਟ ਐਲੀਵੇਸ਼ਨ ਉਪਲਬਧ ਹਨ।
- ਮਿਆਰੀ ਬੇਸ ਯੂਨਿਟ ਮਾਪ ਕਿਵੇਂ ਕੰਮ ਕਰਦੇ ਹਨਰਸੋਈ ਮਾਡਲਿੰਗ ਵਿੱਚ ਵਰਤੀ ਜਾਂਦੀ ਮਿਆਰੀ ਬੇਸ ਯੂਨਿਟ ਡੂੰਘਾਈ ਅਤੇ ਉਚਾਈ ਬਾਰੇ ਜਾਣੋ ਅਤੇ ਇਹ ਮਾਪ ਕੀ ਛੱਡ ਦਿੰਦੇ ਹਨ।
- ਦਰਵਾਜ਼ੇ ਅਤੇ ਖਿੜਕੀ ਦੀ ਜਗ੍ਹਾ ਨੂੰ ਮਾਪ 'ਤੇ ਕਲਿੱਕ ਕਰਕੇ ਵਿਵਸਥਿਤ ਕਰੋਦਰਵਾਜ਼ੇ ਜਾਂ ਖਿੜਕੀ ਦੀ ਜਗ੍ਹਾ ਦੇ ਮਾਪ 'ਤੇ ਕਲਿੱਕ ਕਰੋ ਅਤੇ ਇਸਨੂੰ ਹਿਲਾਉਣ ਲਈ ਨਵਾਂ ਮੁੱਲ ਟਾਈਪ ਕਰੋ, ਅਤੇ ਖਿੜਕੀ ਦੀ ਚੌੜਾਈ, ਉਚਾਈ, ਮੋਟਾਈ ਅਤੇ ਉਚਾਣ ਸੈੱਟ ਕਰੋ।
- ਹਿੰਜ-ਸ਼ੈਲਫ ਟਕਰਾਅ ਪਛਾਣ ਲਈ ਹਿੰਜ ਦੇ ਮਾਪ ਕਨਫਿਗਰ ਕਰੋਹਰ ਹਿੰਜ ਕਿਸਮ ਲਈ ਮਾਪ ਵੱਖਰੇ ਤੌਰ 'ਤੇ ਕਨਫਿਗਰ ਕਰੋ ਤਾਂ ਜੋ ਹਿੰਜ-ਸ਼ੈਲਫ ਟਕਰਾਅ ਦਾ ਪਤਾ ਲੱਗ ਸਕੇ।
- ਇੱਕ ਐਲੀਵੇਸ਼ਨ ਵਿੱਚ ਮਾਪ ਇਕਾਈਆਂ, Align Dimension ਨਾਲਇੱਕ ਐਲੀਵੇਸ਼ਨ ਵਿੱਚ ਇੱਕ ਯੂਨਿਟ ਦਾ ਕਾਰਕਾਸ, ਪਾਰਟੀਸ਼ਨ ਅਤੇ ਸ਼ਟਰ ਉਹਨਾਂ ਦੇ ਕਿਨਾਰਿਆਂ ਰਾਹੀਂ ਚੁਣੋ ਅਤੇ ਇੱਕੋ ਦਿਸ਼ਾ ਵਿੱਚ ਮਾਪਾਂ ਦੀ ਚੇਨ ਬਣਾਓ।
- Drive panel and shutter dimensions with parametric valuesGive panel and shutter dimensions a parametric value so they resize automatically when the driving measurement changes.
- ਪੈਨਲ ਦਾ ਆਕਾਰ ਫਿਕਸ ਕਰੋ ਤਾਂ ਜੋ ਉਹ ਯੂਨਿਟ ਨਾਲ ਆਕਾਰ ਬਦਲਣਾ ਬੰਦ ਕਰ ਦੇਵੇਪੈਨਲ ਦੀ ਲੰਬਾਈ, ਡੂੰਘਾਈ ਜਾਂ ਉਚਾਈ ਨੂੰ ਇੱਕ ਫਿਕਸ ਮੁੱਲ ਤੇ ਸੈੱਟ ਕਰੋ ਤਾਂ ਜੋ ਕੈਬਿਨੈੱਟ ਜਾਂ ਵਾਰਡਰੋਬ ਦਾ ਆਕਾਰ ਬਦਲਣ ਨਾਲ ਉਸ ਪੈਨਲ ਦਾ ਆਕਾਰ ਨਾ ਬਦਲੇ।
- ਪਾਰਟੀਸ਼ਨ ਮਾਪ ਨੂੰ ਨੈਗੇਟਿਵ ਆਫਸੈੱਟ ਨਾਲ ਬਦਲ ਕੇ ਦਰਾਜ਼ ਦੇ ਫੈਸੀਆ ਦੀ ਉਚਾਈ ਸੈੱਟ ਕਰੋਦੇਖੋ ਕਿ ਜਦੋਂ ਤੁਸੀਂ ਨੈਗੇਟਿਵ ਆਫਸੈੱਟ ਨਾਲ ਦਰਾਜ਼ ਦੇ ਫੈਸੀਆ ਦੀ ਉਚਾਈ ਸੈੱਟ ਕਰਦੇ ਹੋ ਤਾਂ ਦਿਖਾਈ ਦੇਣ ਵਾਲੀ ਪਾਰਟੀਸ਼ਨ ਉਚਾਈ ਪੂਰੀ ਉਚਾਈ ਵਿੱਚੋਂ ਪੈਨਲ ਦੀ ਮੋਟਾਈ ਘਟਾ ਕੇ ਕਿਵੇਂ ਬਣਦੀ ਹੈ।
- ਕਮਰੇ ਦੇ ਮਾਪ ਕੇਂਦਰ ਜਾਂ ਅੰਦਰੂਨੀ ਕੰਧਾਂ ਤੋਂ ਸੈੱਟ ਕਰੋ ਅਤੇ ਕਮਰੇ ਦੀ ਕਿਸਮ ਚੁਣੋਕਮਰੇ ਦੇ ਮਾਪ ਨੂੰ ਅੰਦਰੂਨੀ ਕੰਧ ਦੇ ਮਾਪਾਂ ਵਿੱਚ ਬਦਲੋ ਅਤੇ ਕਮਰੇ ਦੀ ਕਿਸਮ ਚੁਣੋ ਤਾਂ ਜੋ Insert ਅਤੇ Furnish ਸਿਰਫ਼ ਮੇਲ ਖਾਂਦਾ ਫਰਨੀਚਰ ਅਤੇ ਸਹਾਇਕ ਸਮਾਨ ਹੀ ਪੇਸ਼ ਕਰਨ।
- ਫਿਲਰ ਪੈਨਲ ਦੀ ਕਿਸਮ ਅਤੇ ਮਾਪ ਉਸਦੀਆਂ ਵਿਸ਼ੇਸ਼ਤਾਵਾਂ ਤੋਂ ਬਦਲੋਫਿਲਰ ਪੈਨਲ ਨੂੰ ਉਸਦੀਆਂ ਵਿਸ਼ੇਸ਼ਤਾਵਾਂ ਵਿੱਚ ਮਾਪ ਸੋਧ ਕੇ ਜਾਂ ਉਸਨੂੰ ਸਹੀ ਕਿਸਮ ਦੇ ਫਿਲਰ ਨਾਲ ਬਦਲ ਕੇ ਠੀਕ ਕਰੋ।
- ਰੱਖਿਆ ਹੋਇਆ ਦਰਵਾਜ਼ਾ ਕਲਿੱਕ ਕਰੋ ਤਾਂ ਉਸ ਦੇ ਮਾਪ ਤਿਆਰ ਹੋ ਜਾਣਗੇਰੱਖਿਆ ਹੋਇਆ ਦਰਵਾਜ਼ਾ ਕਲਿੱਕ ਕਰੋ ਤਾਂ ਸੋਧ ਲਈ ਉਸ ਦੇ ਮਾਪ ਆਪਣੇ ਆਪ ਤਿਆਰ ਹੋ ਜਾਣਗੇ।
- ਸ਼ੈਲਫ ਅਤੇ ਲੰਬਕਾਰੀ ਥਾਵਾਂ ਨੂੰ ਬਰਾਬਰ ਜਾਂ ਸਹੀ ਮਾਪ ਨਾਲ ਵੰਡੋAdd shelves ਅਤੇ ਲੰਬਕਾਰੀ ਹਿੱਸੇ ਜੋ ਥਾਂ ਨੂੰ ਡਿਫਾਲਟ ਰੂਪ ਵਿੱਚ ਬਰਾਬਰ ਵੰਡਦੇ ਹਨ, ਜਾਂ ਕੋਈ ਥਾਂ ਚੁਣੋ ਅਤੇ ਉਸਨੂੰ ਅਸਮਾਨ ਰੂਪ ਵਿੱਚ ਵੰਡਣ ਲਈ ਸਹੀ ਮਾਪ ਭਰੋ।
- ਦਰਵਾਜ਼ੇ ਦੇ ਮਾਪ Shift ਢੰਗ ਨਾਲ ਜਾਂ ਨੀਲੇ ਮੁੱਲ 'ਤੇ ਡਬਲ-ਕਲਿੱਕ ਕਰਕੇ ਬਦਲੋਦਰਵਾਜ਼ੇ ਨੂੰ ਉਸ ਦੀ Shift ਕਤਾਰ ਨਾਲ ਹਿਲਾਓ ਜਾਂ ਆਕਾਰ ਬਦਲਣ ਲਈ ਨੀਲੇ ਮਾਪ ਮੁੱਲ 'ਤੇ ਡਬਲ-ਕਲਿੱਕ ਕਰੋ।
- ਪੈਨਲ ਦੇ ਮਾਪ ਐਕਸਟੈਂਸ਼ਨਾਂ ਅਤੇ ਕੈਬਿਨੈਟ ਸਮਾਯੋਜਨਾਂ ਨਾਲ ਕਿਵੇਂ ਨਿਰਧਾਰਿਤ ਹੁੰਦੇ ਹਨਜਾਣੋ ਕਿ ਪੈਨਲ ਦੀ ਕੁੱਲ ਮੋਟਾਈ ਉਸਦੇ ਕੋਰ ਅਤੇ ਫਿਨਿਸ਼ਾਂ ਤੋਂ ਕਿਵੇਂ ਗਿਣੀ ਜਾਂਦੀ ਹੈ, ਅਤੇ ਪ੍ਰੀ-ਲੈਮੀਨੇਟਿਡ ਅਤੇ ਪੋਸਟ-ਲੈਮੀਨੇਟਿਡ ਕੋਰ ਸਮੱਗਰੀਆਂ ਲਈ ਇਹ ਗਿਣਤੀ ਕਿਵੇਂ ਵੱਖਰੀ ਹੁੰਦੀ ਹੈ।
- ਮਾਪ ਅਤੇ ਐਨੋਟੇਸ਼ਨ ਪੂਰੇ ਕਰਨ ਤੋਂ ਬਾਅਦ ਵਿਊ ਨੂੰ ਲਾਕ ਕਰੋਮਾਪ ਅਤੇ ਐਨੋਟੇਸ਼ਨ ਸ਼ਾਮਲ ਕਰਨ ਤੋਂ ਬਾਅਦ ਸੈਟਿੰਗਾਂ ਤੋਂ ਵਿਊ ਨੂੰ ਦੁਬਾਰਾ ਲਾਕ ਕਰੋ ਤਾਂ ਜੋ ਪੂਰਾ ਹੋਇਆ ਮਾਪ ਅਤੇ ਵੇਰਵਾ ਆਪਣੀ ਥਾਂ 'ਤੇ ਰਹੇ।
- ਦਾਖਲ ਕੀਤੇ ਅਤੇ ਕਟਲਿਸਟ ਪੈਨਲ ਮਾਪਾਂ ਦੀ ਤੁਲਨਾ ਕਰੋਦੇਖੋ ਕਿ ਪੈਨਲ ਦਾ ਸੋਧਯੋਗ ਮਾਪ ਕਟਲਿਸਟ ਅਤੇ ਬੋਰਡ ਲੇਆਉਟ ਤੱਕ ਪਹੁੰਚਣ ਵਾਲੇ ਮੁੱਲ ਤੋਂ ਕਿਉਂ ਵੱਖਰਾ ਹੈ।
- ਕੰਧ ਦੀ ਟਿਕਾਣਾ ਲਾਈਨ ਨੂੰ ਸਮਝੋ ਅਤੇ ਟਾਈਪ ਕੀਤੇ ਮਾਪ ਕਿਵੇਂ ਲਏ ਜਾਂਦੇ ਹਨਜਾਣੋ ਕਿ ਟਿਕਾਣਾ ਲਾਈਨ ਕੰਧ ਦੀ ਮੋਟਾਈ ਨੂੰ ਕਿੱਥੇ ਰੱਖਦੀ ਹੈ ਅਤੇ ਤੁਹਾਡੇ ਟਾਈਪ ਕੀਤੇ ਮਾਪ ਕਿਹੜੇ ਪਾਸੇ ਤੋਂ ਲਏ ਜਾਂਦੇ ਹਨ।
- ਅੰਦਰੂਨੀ ਮਾਪਾਂ ਨੂੰ ਆਪਣੇ-ਆਪ ਸਹੀ ਕਰਨ ਲਈ ਕਾਰਕਸ ਪੈਨਲ ਮੋਟਾਈ ਫਾਰਮੂਲਾ ਵਰਤੋਹੱਥ ਨਾਲ ਗਿਣੇ ਅੰਦਰੂਨੀ ਮਾਪ ਦੀ ਥਾਂ ਕਾਰਕਸ ਪੈਨਲ ਮੋਟਾਈ ਦੇ ਆਧਾਰ 'ਤੇ Enter a formula ਵਰਤੋ, ਅਤੇ ਸਿਸਟਮ ਨੂੰ ਅੰਦਰੂਨੀ ਥਾਂ ਸਹੀ ਮੁੱਲ ਤੱਕ ਸਮਾਯੋਜਿਤ ਕਰਨ ਦਿਓ।
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Align dimension ਨਾਲ ਕਿਨਾਰੇ ਤੋਂ ਕਿਨਾਰੇ ਤੱਕ ਮਾਪ ਕੇ ਕਮਰੇ ਦਰ ਕਮਰੇ ਮਾਪ ਜੋੜੋAlign dimension ਨਾਲ ਇੱਕ ਸਮੇਂ ਇੱਕ ਕਮਰਾ ਮਾਪ ਜੋੜੋ, ਜੋ ਕਿਨਾਰੇ ਤੋਂ ਕਿਨਾਰੇ ਤੱਕ ਮਾਪਦਾ ਹੈ, ਅਤੇ ਉਹਨਾਂ ਨੂੰ ਆਪਣੀ ਚੁਣੀ ਹੋਈ ਲੇਅਰ ਉੱਤੇ ਰੱਖੋ।
- Change a door model and position it by editing its dimensionSelect the door tool to see its height, width, thickness and model in the properties bar.
- Change a wall's length by editing its dimension valueSelect a wall and type a new dimension value to redraw it as a straight wall at the length you set.
- 2D ਫਲੋਰ ਪਲਾਨ ਵਿੱਚ ਸਹੀ ਮਾਪਾਂ ਨਾਲ ਕੰਧਾਂ ਖਿੱਚੋ2D ਫਲੋਰ ਪਲਾਨ ਵਿੱਚ ਉਚਾਈ ਅਤੇ ਮੋਟਾਈ ਦਰਜ ਕਰਕੇ, ਫਿਰ ਕਲਿੱਕ ਕਰਕੇ ਅਤੇ ਸਹੀ ਲੰਬਾਈ ਟਾਈਪ ਕਰਕੇ ਕੰਧਾਂ ਖਿੱਚੋ।
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- ਕਮਰੇ ਦੇ ਮਾਪ ਕਿਵੇਂ ਮਾਪੇ ਜਾਂਦੇ ਹਨਜਾਣੋ ਕਿ ਕਮਰੇ ਦੇ ਮਾਪ ਕੰਧ ਦੇ ਕਿਹੜੇ ਪਾਸੇ ਤੋਂ ਮਾਪੇ ਜਾਂਦੇ ਹਨ ਅਤੇ ਮਾਪ ਦਾ ਹਵਾਲਾ ਕਿਵੇਂ ਬਦਲਣਾ ਹੈ।
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- ਆਕਾਰ ਸੈੱਟ ਕਰਨ ਤੋਂ ਬਾਅਦ ਐਲੀਵੇਸ਼ਨ ਵਿਊਜ਼ ਨੂੰ ਲਾਕ ਕਰੋ ਤਾਂ ਜੋ ਉਹ ਸੁਰੱਖਿਅਤ ਰਹਿਣਆਕਾਰ ਜੋੜਨ ਅਤੇ ਨਾਮ ਦੇਣ ਤੋਂ ਬਾਅਦ ਐਲੀਵੇਸ਼ਨ ਵਿਊ ਨੂੰ ਲਾਕ ਕਰੋ ਤਾਂ ਜੋ ਫਲੋਰ ਪਲਾਨ ਜਾਂ 3D 'ਤੇ ਜਾਣ 'ਤੇ ਇਸ ਦੀਆਂ ਸੈਟਿੰਗਾਂ ਬਚੀਆਂ ਰਹਿਣ।
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a window with configurable dimensionsPlace a window the same way you place a door, then set its dimensions to a standard size such as 800, 850 or 900.
- ਕਾਲਮਾਂ ਨੂੰ ਉਚਾਈ ਅਤੇ ਮਾਪਾਂ ਦੁਆਰਾ ਰੱਖੋਕਾਲਮ ਦੀ ਉਚਾਈ ਅਤੇ ਮਾਪ ਪਰਿਭਾਸ਼ਿਤ ਕਰੋ, ਫਿਰ ਇਸਨੂੰ ਕੰਧ ਦੇ ਅੰਦਰ ਜਾਂ ਕੋਨੇ 'ਤੇ ਰੱਖੋ।
- Set modular furniture size via quick access dimensionsChange the size of a placed modular furniture model by updating its quick access dimensions.
- Set room inner dimensions and wall height before designingSet the left wall height and thickness and name the room so it is identifiable in the project before you start designing.
- Set the wall location line to match the dimension typeMatch the wall location line to the dimension you need so outer-to-outer, inner-to-inner and centre-to-centre values measure from the intended face.
- Show room dimensions and rename rooms on the planTurn on the Label / Show option in a room's properties so its dimensions appear on the plan, and rename rooms from the same area or by clicking inside them.
- Understand an L-corner unit's dimensions and arm changesLearn which dimensions a placed L-corner unit reports and what happens to its arms and cutouts when you change them.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.