பரிமாணங்கள் மற்றும் அளவீடு
வழிகாட்டிகள்: 66
- கைமுறை அளவுகளைச் சேர்த்து சமநிலை இடைவெளியை அளவிடுங்கள்தொடும் உறுப்புகளுக்கு இடையே கைமுறையாக அளவுகளை வையுங்கள்; வைக்கப்பட்ட யூனிட்டுகளைச் சுற்றியுள்ள மீதமுள்ள இடைவெளியை அளவிடுங்கள்.
- ப்ரொஃபைல் ஷட்டர் அமைப்பில் ப்ரொஃபைல் அளவுகளைப் புரிந்துகொள்ளுங்கள்ப்ரொஃபைல் ஷட்டர் அமைப்பில் ஒவ்வொரு ப்ரொஃபைல் உறுப்பின் Dimensions, H மற்றும் D மதிப்புகள் அந்தப் ப்ரொஃபைலையும் கண்ணாடியையும் எவ்வாறு மாற்றுகின்றன என்பதை அறிக.
- சரியான வரைதல் அடுக்கில் தானியங்கி அளவீட்டைப் பயன்படுத்தவும்முதலில் அலகுகளைப் பொருந்தும் திட்ட அடுக்கிற்கு அமைக்கவும், பின்னர் தானியங்கி அளவீட்டைச் சேர்த்து அனைத்து கேபினெட் அளவீடுகளையும் ஒரே நேரத்தில் நிரப்பவும்.
- கூடுதல் அளவுகளை அளவுருக்களாகச் சேர்த்து அவற்றை விருப்பங்களாக வெளிப்படுத்துங்கள்தளவாடத்தில் விருப்பமாக கிடைக்க வேண்டிய கூடுதல் அளவை Parameter-இல் சேர்த்து, பின்னர் அதை உருவாக்கி தளவாடத்தைப் புதுப்பிக்கவும்.
- தானியங்கு அளவுகோடுகளைச் சேர்த்து, மறுசீரமைத்து, பூட்டவும்தானியங்கு அளவுகோடுகளைச் சேர்த்த பிறகு, விடுபட்டவற்றை அளவுகோல் கருவியால் நிரப்பி, அவற்றை மறுசீரமைத்து, பின்னர் காட்சியை மையப்படுத்திப் பூட்டவும்.
- அளவுகள் மற்றும் குறிப்புகளுக்கு வண்ணக் குறியீடு அமைக்கவும்வரைபடங்களைப் படிக்க எளிதாகவும் முக்கியமான பொருட்கள் தெளிவாகவும் தெரிய, அளவுகள் மற்றும் குறிப்புகளுக்கு வண்ணங்கள் கொடுக்கவும்.
- ஒரு எலிவேஷனில் பரிமாணக் கோடுகளை நீக்கி மறுவரிசைப்படுத்தவும்உங்களுக்கு இனி தேவைப்படாத பரிமாணக் கோட்டை அகற்றி, தானியங்கி பரிமாணக் கோடுகளை நீங்கள் விரும்பும் வரிசைக்கு இழுக்கவும்.
- எலும்புக்கூடு பயன்முறையில் அமைச்சரக்கின் உட்புறப் பிரிவுகளை அளவிடுங்கள்உட்புறப் பிரிவு அளவுகளைச் சேர்க்க எலும்புக்கூடு பயன்முறையை இயக்குங்கள், அல்லது பிரிவுகளைக் கைமுறையாக அளவிடுங்கள்.
- பரிமாண மதிப்புகள் உண்மையான மாதிரி பரிமாணங்களை எவ்வாறு பிரதிபலிக்கின்றனஒரு வடிவமைப்பு அல்லது உயரப்பார்வில் உள்ள பரிமாண மதிப்புகள் உண்மையான மாதிரி பரிமாணங்களிலிருந்து வருவதற்கான காரணத்தையும், Annotate-இன் கீழ் உள்ள Align கருவியைப் பயன்படுத்தி கூடுதல் அளவீடுகளைச் சேர்ப்பது எப்படி என்பதையும் அறிக.
- பரிமாணக் கோட்டின் நிறத்தை சரியான ஹெக்ஸ் மதிப்பாக அமைக்கவும்The dimension line colour defaults to black (#000000), so enter a valid hex value to avoid mirror or blink visuals.
- Add hatch, dimensions, text and arrow annotationsDraw a hatch rectangle, adjust its scale and apply it, then edit arrow head size, text size and text colour in the properties panel.
- Avoid overlapping entities by adjusting dimensionsClick a placed element to see its dimensions and adjust them directly so it does not push into another element.
- Choose Draw or Annotate tools for shapes, notes and dimensionsLearn which floor plan editor tools draw geometry and which add text, dimensions and leader lines, and how to set annotation styles before placing them.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Fix incorrect or missing auto dimensionsCheck the dimensioning settings and pick points carefully when auto dimensions come out wrong or absent.
- மீள்ஏற்றத்தின் போது பரிமாணக் கோடுகள் உறுப்பின் snap புள்ளிகளுக்கு எவ்வாறு மீண்டும் இணைகின்றனஒரு பரிமாணக் கோடு மீள்ஏற்றங்கள் முழுவதும் ஒரு உறுப்பின் பெயரிடப்பட்ட snap புள்ளியுடன் தனது இணைப்பை எவ்வாறு தக்கவைத்துக்கொள்கிறது, அந்த snap புள்ளி மறைந்தால் என்ன நடக்கும் என்பதை அறிக.
- ஒவ்வொரு பொருள் வகையும் எந்த அளவுகளுக்கு எதிராக சரிபார்க்கப்படுகிறது என்பதை அறிககேரousel பொருட்களை வடிகட்டும்போது, ஒவ்வொரு வன்பொருள் வகையும் எந்த அளவுகளை அதன் வரம்புகளுக்கு எதிராக ஒப்பிடுகிறது என்பதை அறிக.
- Measure a distance with the ME shortcutUse ME and pick two points to measure the distance between them.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
- Use ME E enter shortcut to measure in the designTake measurements in the design with the 'ME E enter' shortcut, for example to confirm a blind corner measurement.
- ஷட்டர், ஸ்கர்ட்டிங் மற்றும் கார்காஸ் அளவுகளுக்கான கணக்குகார்காஸ் அளவுகளில் சேர்க்கப்படாத ஷட்டர் தடிமன், ஸ்கர்ட்டிங் இடைவெளி மற்றும் இழுப்பறை இடைவெளிக்கு ஏற்ப பேனல் அளவுகளைச் சரிசெய்யவும்.
- Change partition dimension instead of translating a shelfAdjust a cabinet by manipulating partition levels, add a shutter system at the partition level, and avoid translating a shelf so the shelf still matches the partition layout.
- வெளிப்புற அளவிலிருந்து ஷட்டர் அளவுகள் எவ்வாறு கணக்கிடப்படுகின்றனவெளிப்புற அளவுகளிலிருந்து வடிவமைப்பு அளவுருக்களைக் கழிப்பதன் மூலம் கணினி ஷட்டரின் அளவை எவ்வாறு பெறுகிறது என்பதை அறிக.
- L-மூலை யூனிட்டின் அளவுகள் மற்றும் ஷட்டர் விருப்பங்களைப் புரிந்துகொள்ளுங்கள்Front Back, Side Back, Side Left மற்றும் Side Right ஆகிய அளவுகள் L-மூலை யூனிட்டின் எந்த முகங்களுக்குப் பொருந்துகின்றன, அது எந்த ஷட்டர் அமைப்புகளை வழங்குகிறது என்பதை அறிக.
- அளவுகளுடன் உள் மற்றும் வெளி உயர்த்தோற்றங்களை உருவாக்கவும்அளவுகளைக் கொண்ட உள் மற்றும் வெளி உயர்த்தோற்றங்களை உருவாக்கவும்; நீங்கள் பணியாற்றும் போது skeleton mode மற்றும் நகல் உயர்த்தோற்றங்கள் கிடைக்கும்.
- நிலையான அடிப்படை அலகு அளவுகள் எவ்வாறு செயல்படுகின்றனசமையலறை மாடலிங்கில் பயன்படுத்தப்படும் நிலையான அடிப்படை அலகு ஆழம் மற்றும் உயரத்தை அறிந்து கொள்ளுங்கள்; அந்த அளவீடுகள் எதை விட்டுவிடுகின்றன என்பதையும் தெரிந்து கொள்ளுங்கள்.
- பரிமாணத்தைக் கிளிக் செய்து கதவு மற்றும் ஜன்னல் இடத்தைச் சரிசெய்யவும்ஒரு கதவு அல்லது ஜன்னலின் இடப் பரிமாணத்தைக் கிளிக் செய்து புதிய மதிப்பைத் தட்டச்சு செய்து அதை நகர்த்தவும், மேலும் ஜன்னலின் அகலம், உயரம், தடிமன் மற்றும் உயரத்தை அமைக்கவும்.
- Configure hinge dimensions for hinge-shelf collision detectionConfigure the dimensions for every hinge type individually so hinge-shelf collisions can be detected.
- Align Dimension உள்ள ஒரு உயர்த்தோற்றத்தில் அளவு அலகுகள்ஒரு உயர்த்தோற்றத்தில், ஒரு அலகின் கேபினட் கட்டமைப்பு, இடைத்தடுப்புகள் மற்றும் கதவுப் பலகைகளை அவற்றின் விளிம்புகள் வழியாகவும், ஒரே திசையில் அளவுக் கோடுகளைச் சங்கிலியாகவும் தேர்ந்தெடுக்கவும்.
- அளவுரு மதிப்புகளால் பேனல் மற்றும் ஷட்டர் அளவுகளை இயக்கவும்பேனல் மற்றும் ஷட்டர் அளவுகளுக்கு அளவுரு மதிப்பைக் கொடுங்கள், இதனால் இயக்கும் அளவு மாறும்போது அவை தானாகவே அளவு மாறும்.
- ஒரு panel அளவை நிலையாக வைத்து, அது unit-உடன் அளவு மாறுவதை நிறுத்துங்கள்ஒரு panel-இன் நீளம், ஆழம் அல்லது உயரத்தை நிலையான மதிப்பாக அமைக்கவும், அதனால் cabinet அல்லது wardrobe-ஐ அளவு மாற்றினாலும் அந்த panel அளவு மாறாமல் இருக்கும்.
- எதிர்மறை ஆஃப்செட் மூலம் பார்டிஷன் அளவைச் சரிசெய்து டிராயர் ஃபேஷியா உயரத்தை அமைக்கவும்எதிர்மறை ஆஃப்செட்டுடன் டிராயர் ஃபேஷியா உயரத்தை அமைக்கும்போது, காட்டப்படும் பார்டிஷன் உயரம் முழு உயரத்திலிருந்து பேனல் தடிமன் கழித்த அளவாக இருப்பதைப் பாருங்கள்.
- Set room dimensions from center or inner walls and pick room typeSwitch room dimensions to inner-wall measurements and choose a room type so Insert and Furnish only offers matching furniture and accessories.
- அதன் properties-இல் இருந்து ஒரு filler panel-இன் வகை மற்றும் அளவுகளை மாற்றவும்அதன் properties-இல் உள்ள அளவைத் திருத்தி அல்லது சரியான வகையின் filler-ஆல் அதை மாற்றி ஒரு filler panel-ஐச் சரிசெய்யவும்.
- இடப்பட்ட கதவைக் கிளிக் செய்தால் அதன் அளவுகள் உருவாக்கப்படும்இடப்பட்ட கதவைக் கிளிக் செய்தால் திருத்துவதற்காக அதன் அளவுகள் தானாக உருவாக்கப்படும்.
- அலமாரிப் பலகையையும் செங்குத்துப் பிரிவுகளையும் சமமாகவோ அல்லது துல்லியமான அளவின்படியோ பிரிக்கவும்Add shelves மற்றும் செங்குத்துப் பிரிவுகள் இயல்பாக இடத்தைச் சமமாகப் பிரிக்கும்; அல்லது ஒரு இடத்தைத் தேர்ந்தெடுத்து, அதைச் சமமற்ற முறையில் பிரிக்கத் துல்லியமான அளவை உள்ளிடவும்.
- கதவின் அளவுகளை Shift முறை மூலமாகவோ அல்லது நீல நிற மதிப்பை இருமுறை கிளிக் செய்வதன் மூலமாகவோ திருத்தவும்கதவை அதன் Shift வரிசையைக் கொண்டு நகர்த்தவும் அல்லது அதன் அளவை மாற்ற நீல நிற அளவு மதிப்பை இருமுறை கிளிக் செய்யவும்.
- பேனல் அளவுகள் நீட்சிகள் மற்றும் கேபினெட் சரிசெய்தல்களால் எவ்வாறு தீர்மானிக்கப்படுகின்றனஒரு பேனலின் மொத்த தடிமன் அதன் உள்ளகப் பொருள் மற்றும் ஃபினிஷ்களிலிருந்து எவ்வாறு கணக்கிடப்படுகிறது, மேலும் pre-laminated மற்றும் post-laminated உள்ளகப் பொருட்களுக்கு அந்தக் கணக்கீடு எவ்வாறு வேறுபடுகிறது என்பதை அறிக.
- பரிமாணங்கள் மற்றும் குறிப்புகளை முடித்த பிறகு காட்சியைப் பூட்டவும்பரிமாணங்கள் மற்றும் குறிப்புகள் சேர்க்கப்பட்ட பிறகு, முடிக்கப்பட்ட பரிமாணமிடல் மற்றும் விவரமாக்கல் அப்படியே இருக்கும்படி settings இலிருந்து காட்சியை மீண்டும் பூட்டவும்.
- உள்ளிட்ட மற்றும் வெட்டுப்பட்டியல் பேனல் அளவுகளைப் படிக்கவும்ஒரு பேனலின் திருத்தக்கூடிய அளவு, வெட்டுப்பட்டியல் மற்றும் போர்டு அமைப்புக்கு வரும் மதிப்பிலிருந்து ஏன் வேறுபடுகிறது என்பதைப் பார்க்கவும்.
- சுவர் இருப்பு கோட்டைப் புரிந்துகொள்ளுங்கள், தட்டச்சு செய்யப்பட்ட அளவுகள் எவ்வாறு அளக்கப்படுகின்றன என்பதையும் அறிந்துகொள்ளுங்கள்இருப்புக் கோடு சுவர் தடிமனை எவ்வாறு வைக்கிறது, நீங்கள் தட்டச்சு செய்யும் அளவுகள் எந்த முகத்திலிருந்து அளக்கப்படுகின்றன என்பதை அறிந்துகொள்ளுங்கள்.
- கேபினட் அமைப்புப் பலகைத் தடிமன் சூத்திரத்தைப் பயன்படுத்தி உள் அளவுகளைத் தானாகச் சரிசெய்யவும்கைமுறையாகக் கணக்கிடப்பட்ட உள் அளவுக்குப் பதிலாக, கேபினட் அமைப்புப் பலகைத் தடிமனின் அடிப்படையில் Enter a formula அமைக்கவும்; உள் இடத்தைச் சரியான மதிப்புக்கு கணினி தானாகச் சரிசெய்யட்டும்.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Align dimension மூலம் அறை வாரியாக விளிம்பிலிருந்து விளிம்பு வரை அளவுகளைச் சேர்க்கவும்Align dimension மூலம் ஒரு நேரத்தில் ஒரு அறையாக அளவுகளைச் சேர்க்கவும்; இது விளிம்பிலிருந்து விளிம்பு வரை அளவிடும். நீங்கள் தேர்ந்தெடுக்கும் layer-ல் அவற்றை வைக்கவும்.
- Change a door model and position it by editing its dimensionSelect the door tool to see its height, width, thickness and model in the properties bar.
- Change a wall's length by editing its dimension valueSelect a wall and type a new dimension value to redraw it as a straight wall at the length you set.
- Draw walls in the 2D floor plan with exact dimensionsDraw walls in the 2D floor plan by entering height and thickness, then clicking and typing exact lengths.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- அறையின் அளவுகள் எவ்வாறு அளவிடப்படுகின்றனஅறையின் அளவுகள் எந்தச் சுவர் முகப்பிலிருந்து அளவிடப்படுகின்றன, அளவீட்டு அடிப்படையை எவ்வாறு மாற்றுவது என்பதை அறிக.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- பரிமாணங்களை அமைத்த பிறகு எலிவேஷன் காட்சிகளைப் பூட்டி அவற்றைப் பாதுகாக்கவும்பரிமாணங்களைச் சேர்த்து பெயரிட்ட பிறகு எலிவேஷன் காட்சியைப் பூட்டவும், அதன் அமைப்புகள் தள வரைபடம் அல்லது 3D-க்கு மாறும்போது பாதுகாக்கப்படும்.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a window with configurable dimensionsPlace a window the same way you place a door, then set its dimensions to a standard size such as 800, 850 or 900.
- உயரம் மற்றும் பரிமாணங்களின் அடிப்படையில் தூண்களை வைக்கவும்ஒரு தூணின் உயரம் மற்றும் பரிமாணங்களை வரையறுத்து, பின்னர் அதை ஒரு சுவருக்குள் அல்லது ஒரு மூலையில் வைக்கவும்.
- Set modular furniture size via quick access dimensionsChange the size of a placed modular furniture model by updating its quick access dimensions.
- Set room inner dimensions and wall height before designingSet the left wall height and thickness and name the room so it is identifiable in the project before you start designing.
- Set the wall location line to match the dimension typeMatch the wall location line to the dimension you need so outer-to-outer, inner-to-inner and centre-to-centre values measure from the intended face.
- Show room dimensions and rename rooms on the planTurn on the Label / Show option in a room's properties so its dimensions appear on the plan, and rename rooms from the same area or by clicking inside them.
- Understand an L-corner unit's dimensions and arm changesLearn which dimensions a placed L-corner unit reports and what happens to its arms and cutouts when you change them.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.