치수 및 측정
가이드: 66
- 수동 치수를 추가하고 균형 공간을 측정하세요맞닿은 요소 사이에 치수를 직접 배치하고, 배치된 유닛 주변의 남은 공간을 측정하세요.
- 프로파일 셔터 시스템에서 프로파일 치수 이해하기각 프로파일 요소의 자체 치수, H 및 D 값이 해당 프로파일과 프로파일 셔터 시스템의 유리를 어떻게 변경하는지 알아보세요.
- 올바른 도면 레이어에서 자동 치수 사용먼저 단위를 일치하는 평면도 레이어로 설정한 다음, 자동 치수를 추가하여 모든 캐비닛 치수를 한 번에 채우세요.
- 추가 치수를 매개변수로 추가하여 옵션으로 노출하기가구에서 옵션으로 사용할 추가 치수를 Parameter 아래에 추가한 다음, 생성하고 가구를 업데이트하세요.
- 자동 치수 추가, 재배치 및 잠금자동 치수를 추가한 후 치수 도구로 누락된 치수를 채우고, 치수를 재배치한 다음 보기를 가운데 정렬하고 잠급니다.
- 치수 및 주석에 색상 코드 지정치수와 주석에 색상을 지정하면 도면을 더 쉽게 읽을 수 있고 중요한 항목이 눈에 띕니다.
- 입면도에서 치수선 삭제 및 순서 변경더 이상 필요 없는 치수선을 제거한 다음, 자동 치수선을 원하는 행 순서로 끌어다 놓으세요.
- 스켈레톤 모드로 내부 수납장 칸막이 치수 기입스켈레톤 모드를 켜서 내부 칸막이 치수를 추가하거나, 대신 칸막이 치수를 수동으로 기입하세요.
- 치수 값이 실제 모델 치수를 반영하는 방식디자인 또는 입면도에서 치수 값이 실제 모델 치수에서 산출되는 이유와 Annotate 아래의 Align 도구로 추가 측정을 넣는 방법을 알아보세요.
- 치수선 색상을 유효한 16진수 값으로 설정하세요치수선 색상의 기본값은 검정(#000000)이므로, 반전되거나 깜빡이는 화면이 나타나지 않도록 유효한 16진수 값을 입력하세요.
- Add hatch, dimensions, text and arrow annotationsDraw a hatch rectangle, adjust its scale and apply it, then edit arrow head size, text size and text colour in the properties panel.
- Avoid overlapping entities by adjusting dimensionsClick a placed element to see its dimensions and adjust them directly so it does not push into another element.
- Choose Draw or Annotate tools for shapes, notes and dimensionsLearn which floor plan editor tools draw geometry and which add text, dimensions and leader lines, and how to set annotation styles before placing them.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Dimension point-to-point, line-to-line, or with auto dimensionsAdd point-to-point, line-to-line or automatic dimensions to your design and remove any you do not want.
- Enter dimensions in the right order for appliances and unitsLearn which dimension order applies to appliances and which to units so you enter each measurement in the right field.
- Fix incorrect or missing auto dimensionsCheck the dimensioning settings and pick points carefully when auto dimensions come out wrong or absent.
- 다시 로드할 때 치수선이 요소 스냅 지점에 다시 고정되는 방식치수선이 다시 로드해도 요소의 명명된 스냅 지점에 대한 부착을 유지하는 방법과 그 스냅 지점이 사라질 때 발생하는 일을 알아보세요.
- 각 항목 유형이 어떤 치수에 대해 검사되는지 확인하세요캐러셀이 항목을 필터링할 때 각 하드웨어 유형이 어떤 치수를 한계값과 비교하는지 알아보세요.
- Measure a distance with the ME shortcutUse ME and pick two points to measure the distance between them.
- Understand dimension attachment circles and delete extra dimensionsClick a dimension to see a circle marking what it is attached to, and remove any extra dimensions you no longer need.
- Use ME E enter shortcut to measure in the designTake measurements in the design with the 'ME E enter' shortcut, for example to confirm a blind corner measurement.
- Account for shutter, skirting and carcass dimensionsAdjust panel sizes for the shutter thickness, skirting buffer and drawer clearance that the carcass figures leave out.
- Change partition dimension instead of translating a shelfAdjust a cabinet by manipulating partition levels, add a shutter system at the partition level, and avoid translating a shelf so the shelf still matches the partition layout.
- 외부 치수에서 셔터 치수를 계산하는 방법시스템이 외부 치수에서 설계 매개변수를 빼서 셔터의 치수를 산출하는 방법을 알아보세요.
- L형 코너 유닛의 치수와 도어 옵션 이해하기Front Back, Side Back, Side Left, Side Right 치수가 L형 코너 유닛의 각 면에 어떻게 대응되는지, 그리고 어떤 도어 시스템을 제공하는지 알아보세요.
- 치수를 포함한 내부 및 외부 입면도를 생성합니다치수가 표시된 내부 및 외부 입면도를 생성할 수 있으며, 작업 중에 스켈레톤 모드와 입면도 복제를 사용할 수 있습니다.
- 표준 하부장 치수가 작동하는 방식Learn the standard base unit depth and height used in kitchen modelling and what those measurements leave out.
- 치수를 클릭하여 문과 창의 위치를 조정합니다문이나 창의 위치 치수를 클릭하고 새 값을 입력하여 이동하며, 창의 너비, 높이, 두께 및 높낮이를 설정합니다.
- 힌지-선반 충돌 감지를 위한 힌지 치수 구성힌지-선반 충돌을 감지할 수 있도록 모든 힌지 유형의 치수를 개별적으로 구성하세요.
- 입면도에서의 치수 단위 Align Dimension입면도에서 같은 방향을 따라 단위의 몸통, 칸막이, 도어의 모서리와 연속 치수를 선택하세요.
- 파라메트릭 값으로 패널과 도어 치수 구동하기패널과 도어 치수에 파라메트릭 값을 지정하면 구동 치수가 변경될 때 자동으로 크기가 조정됩니다.
- 패널 치수를 고정하여 단위에 따라 크기가 조정되지 않도록 하기패널의 길이, 깊이 또는 높이를 고정 값으로 설정하면 캐비닛이나 옷장의 크기를 조정해도 해당 패널의 크기는 그대로 유지됩니다.
- 음수 오프셋으로 칸막이 치수를 조정하여 서랍 앞판 높이를 설정하세요.음수 오프셋으로 서랍 앞판 높이를 설정할 때 표시되는 칸막이 높이가 전체 높이에서 패널 두께를 뺀 값임을 확인하세요.
- Set room dimensions from center or inner walls and pick room typeSwitch room dimensions to inner-wall measurements and choose a room type so Insert and Furnish only offers matching furniture and accessories.
- 속성에서 충전 패널의 유형과 치수를 변경속성에서 치수를 편집하거나 올바른 유형의 충전재로 교체하여 충전 패널을 수정하세요.
- 배치된 문을 클릭하면 치수가 생성됩니다배치된 문을 클릭하면 편집할 수 있도록 치수가 자동으로 생성됩니다.
- 선반과 수직 공간을 균등하게 또는 정확한 치수로 분할합니다Add shelves 및 수직 구분은 기본적으로 공간을 균등하게 분할합니다. 또는 공간을 선택하고 정확한 치수를 입력하여 불균등하게 분할할 수 있습니다.
- Shift 방식 또는 파란색 값을 더블클릭하여 문 치수를 편집합니다Shift 행으로 문을 이동하거나 파란색 치수 값을 더블클릭하여 크기를 조정합니다.
- 확장과 캐비닛 조정이 패널 치수를 결정하는 방식패널의 총 두께가 심재와 마감재로부터 어떻게 계산되는지, 그리고 그 계산이 프리라미네이트 심재와 포스트라미네이트 심재에서 어떻게 다른지 알아봅니다.
- 치수와 주석을 완료한 후 보기를 잠그세요치수와 주석을 추가한 후 설정에서 보기를 다시 잠그면 완료된 치수 작업과 상세 작업이 그대로 유지됩니다.
- 입력된 치수와 컷리스트 패널 치수 비교패널의 편집 가능한 치수가 컷리스트와 보드 배치에 반영되는 값과 다른 이유를 확인하세요.
- 벽 위치선을 이해하고 입력한 치수가 어떻게 측정되는지 알아보세요위치선이 벽 두께를 어떻게 배치하는지, 그리고 입력한 치수가 어느 면에서 측정되는지 알아보세요.
- 몸통 패널 두께 수식을 사용하여 내부 치수를 자동으로 조정수동으로 계산한 내부 치수 대신 몸통 패널 두께를 기준으로 Enter a formula하고, 시스템이 내부 공간을 올바른 값으로 조정하도록 하십시오.
- Add base and loft shelves via partition dimensions using clear heightSet the base shelf from clear height and add a second shelf to divide the loft and fix its height from the top partition dimensions.
- Align dimension으로 가장자리에서 가장자리까지 측정하여 방마다 치수를 추가하세요Align dimension으로 한 번에 한 방씩 치수를 추가하세요. 이 도구는 가장자리에서 가장자리까지 측정하며, 치수는 선택한 레이어에 배치됩니다.
- Change a door model and position it by editing its dimensionSelect the door tool to see its height, width, thickness and model in the properties bar.
- Change a wall's length by editing its dimension valueSelect a wall and type a new dimension value to redraw it as a straight wall at the length you set.
- 정확한 치수로 2D 평면도에 벽을 그립니다높이와 두께를 입력한 뒤 화면을 클릭하고 정확한 길이를 입력하여 2D 평면도에 벽을 그립니다.
- Edit a placed unit's dimensions from the floor planSelect a placed unit in the floor plan and change its dimensions directly from the dimension fields so it updates immediately.
- Edit door and window dimensions, model, and flip hinges from properties tabSelect a door or window and open the properties tab to change its dimensions, floor elevation, and opening direction.
- Edit sink dimensions from the furniture light unitChange a sink's height, width and depth by selecting it and opening the furniture light unit in the selection tree.
- 방 치수가 측정되는 방식방 치수가 어느 벽면을 기준으로 측정되는지, 그리고 측정 기준을 변경하는 방법을 알아보세요.
- Insert base units and position them using dimension offsetsPlace base kitchen units, align them to a wall with a dimension offset, adjust their width and set their finishes, core material and edge banding.
- 치수를 설정한 후 입면도를 잠가서 보존하세요치수를 추가하고 이름을 지정한 후 입면도를 잠그면 평면도나 3D로 전환해도 설정이 유지됩니다.
- Override cabinet dimensions with negative valuesOverride cabinet dimensions such as depth or height by entering negative values when you have access to the sizing rules.
- Place a window with configurable dimensionsPlace a window the same way you place a door, then set its dimensions to a standard size such as 800, 850 or 900.
- 높이와 치수로 기둥 배치기둥의 높이와 치수를 정의한 다음 벽 안이나 모서리에 배치하세요.
- Set modular furniture size via quick access dimensionsChange the size of a placed modular furniture model by updating its quick access dimensions.
- Set room inner dimensions and wall height before designingSet the left wall height and thickness and name the room so it is identifiable in the project before you start designing.
- Set the wall location line to match the dimension typeMatch the wall location line to the dimension you need so outer-to-outer, inner-to-inner and centre-to-centre values measure from the intended face.
- Show room dimensions and rename rooms on the planTurn on the Label / Show option in a room's properties so its dimensions appear on the plan, and rename rooms from the same area or by clicking inside them.
- Understand an L-corner unit's dimensions and arm changesLearn which dimensions a placed L-corner unit reports and what happens to its arms and cutouts when you change them.
- Understand fixed and adjustable shelf dimensionsSee how a fixed shelf runs end to end while an adjustable shelf is reduced on both sides.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.