拉手
指南:46
- 从门板系统层级更改门板拉手、配件、机构和设计在门板系统层级更改门板的拉手、机构和目录设计。
- 通过门板系统设置更改拉手类型、方向和位置打开门板系统设置,以切换拉手类型、设置方向并配置位置。
- 为门板添加拉手型材和非拉手型材从型材库中选择拉手型材或非拉手型材,并将其应用到所选门板。
- Remove or change a shutter handleTake the handle off one shutter or pick a different handle, then adjust its settings in the left panel.
- 通过“柜体结构”再“门板型材”添加拉手型材要配置门板拉手型材,请依次打开“柜体结构”和“门板型材”,并按正确顺序选择型材类型。
- 配置百叶门系统的拉手、型材、颜色和玻璃为柜体百叶门系统选择拉手类型、型材、颜色和玻璃选项,请注意系统设置与单扇百叶门的编辑是分开的。
- Apply finger groove panel handles to any unit typeAdd a finger-groove handle so its groove is cut into the shutter and the carcass adjusts, on base units, tall units and drawers alike.
- 独立应用拉手和非拉手型材为拉手边和其余边分别设置各自的型材、厚度和颜色,无需重复输入同一型材。
- 一次更改多个柜体的拉手多选柜体,然后使用属性面板中的'modify handle'选项一起更改它们的拉手。
- 从选择树中删除门板拉手通过删除选择树中的条目,从门板上移除拉手。
- 使用 shift 选项微调拉手位置使用 shift 选项可垂直或横向移动已放置的拉手,以微调其在门板上的位置。
- 为有框、吊柜和地柜门板放置型材拉手为型材拉手选择安装侧,有框、吊柜和地柜单元可沿用默认值和铰链规则。
- 使用抽屉拉手选择器在抽屉层级添加拉手为单个抽屉或多个柜体一次性指定拉手,无需改动放置或方向设置。
- 按抽屉逐个应用和移除抽屉拉手为每个抽屉单独配置拉手,而不是整个柜体共用一个拉手。
- 更改表面拉手的位置选择柜门,然后在 Shutter systems > Handle placement 下选择新的拉手位置。
- 一次为多个单元更换拉手和材料将多个单元一起选中,使用 change material / interchange 控件,一次操作即可更换它们的饰面。
- 处理弧形板件及其开料清单长度将弧形板件作为一个整体建模,并在开料清单和报价中读取其展开后的毛坯长度。
- 为面板五金添加拉手和型材在拉手部分添加拉手,并从列表中选择所需的型材。
- 使用Modify Handle应用Gola拉手和型材拉手选择型材拉手类别,并通过Modify Handle将Gola拉手或型材拉手应用到地柜、吊柜和单个柜体上。
- 应用拉手型材并添加填充件应用拉手型材并添加填充件,以自定义您的板材。
- Gola侧边、无拉手及位置更改让竖向gola随门开启侧变化,完全移除拉手,并从柜门系统的拉手部分更改位置。
- 两个柜体之间如何共用一根竖向gola拉手了解竖向gola拉手如何连接两个相邻柜体、如何在两侧板上开槽,以及移除后会发生什么。
- 为旋钮、拉手条和气撑上翻门的拉手设置安装位置在 9 个位置的网格上放置普通旋钮或拉手条拉手,并了解气撑上翻门和 Double Lift Up 上翻门允许哪些位置。
- Apply a G profile as a handle on sliding wardrobe shuttersApply a G profile handle to a sliding wardrobe shutter through the normal handle application flow for the shutter.
- Change the handle type on library furnitureChange the handle type on furniture you added from the library so it no longer keeps the default surface handle.
- 调整拉手尺寸、延伸段,以及为什么切换拉手时自定义尺寸会重置可覆盖已放置拉手的宽度、高度和深度,为型材拉手添加左/右延伸段,并了解为什么更换拉手项目会重置您的自定义设置。
- gola 和 FGP 如何处理缩进的柜门和抽屉了解 gola 和指槽拉手类物品如何通过拉手物品上设置的缩减值自动缩短柜门和抽屉面板。
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 指槽拉手高度如何设置了解指槽拉手的高度来自哪里,以及缺失时会发生什么。
- Place a handle and set its heightPlace a handle of a particular size and specify the height at which it sits.
- Rotate a handle only when its SKU has a left/right optionFlip or rotate a shutter handle only if its SKU offers a left/right orientation option, then set it horizontal or vertical.
- Set handle position on selected shutters after Modify HandleApply a handle to several selected cabinets or wardrobes through Modify Handle, then set the handle position for the selected shutters.
- Understand handle carousel categories and handle coloursLearn how the handle carousel groups Gola Handles, Handles and Profile Handles, and why each handle colour appears as its own card.
- Why handles are hidden in the catalog pickerLearn why handle, gola and profile-handle items disappear from the picker for a shutter and where to find them.
- Add profile shutters and change handles via shutter system config and catalogAdd a shutter system to a cabinet's parent partition so a shutter is created automatically.
- 在单个门板级别更改门板设计和拉手选择单个门板,然后使用"Shutter design"选项更改其设计或拉手。
- Create glass shutters and add profile handlesTurn a shutter panel into a glass shutter by switching its core material to a glass core in the Customize tab.
- 将柜体切换为型材拉手或无拉手门板在设计过程中直接更改柜体,从普通拉手改为型材拉手或无拉手门板,无需单独的产品目录或构造设置。
- Change door model, finish and handlePick a door model from the carousel, then set its finish and handle from meshes and materials.
- 使用 R 拉手延长板件侧边使用 R 拉手将板件延长指定量,例如 100 mm。
- 在属性中更改衣柜门板材料、封边、拉手和位置选择衣柜,在属性面板中更改其门板材料和饰面、封边、拉手以及拉手位置。
- 从属性面板修改台面和拉手在属性面板中,Select units 可更改台面材质和厚度,或更换拉手。
- 检查为什么带有Gola拉手的门板边缘没有封边条了解Gola拉手、型材拉手或指槽拉手如何替代其所处门板边缘上的封边条,以及如何将其与缺陷区分开。
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Move or resize a wall with the circular end handleClick the circular handle at one end of a wall and drag it to shorten, extend or reposition the wall.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.