हैंडल
गाइड: 46
- shutter system स्तर से shutter handle, accessory, mechanism और design बदलेंshutter system स्तर से shutter का handle, mechanism और catalogue design बदलें।
- shutter system सेटिंग्स के माध्यम से handle का प्रकार, दिशा और स्थिति बदलेंhandle के प्रकार बदलने, दिशा सेट करने और स्थिति कॉन्फ़िगर करने के लिए shutter system सेटिंग्स खोलें।
- shutter में handle और non-handle profile जोड़ेंprofile library से handle या non-handle profile चुनें और उसे चयनित shutter पर लागू करें।
- shutter हैंडल हटाएँ या बदलेंकिसी एक shutter से हैंडल हटाएँ या कोई दूसरा हैंडल चुनें, फिर left panel में उसकी सेटिंग्स समायोजित करें।
- Construction फिर Shutter Profile के माध्यम से handle profile जोड़ेंConstruction खोलकर फिर Shutter Profile चुनें और सही sequence में profile प्रकार चुनकर shutter handle profile कॉन्फ़िगर करें।
- shutter system के हैंडल, profile, रंग और glass कॉन्फ़िगर करेंकैबिनेट shutter system के लिए हैंडल प्रकार, profile, रंग और glass विकल्प चुनें; ध्यान रखें कि system सेटिंग प्रति-shutter संपादनों से अलग रहती है।
- Apply finger groove panel handles to any unit typeAdd a finger-groove handle so its groove is cut into the shutter and the carcass adjusts, on base units, tall units and drawers alike.
- handle और non-handle profile को स्वतंत्र रूप से लागू करेंhandle edge और शेष edges को बिना वही profile दो बार दर्ज किए उनका अपना profile, thickness और रंग दें।
- एक साथ कई कैबिनेट के हैंडल बदलेंकैबिनेट को मल्टी-सेलेक्ट करें और properties panel में 'modify handle' विकल्प का उपयोग करके उनके हैंडल एक साथ बदलें।
- selection tree से shutter handle हटाएँselection tree में उसकी प्रविष्टि हटाकर shutter से handle निकालें।
- shift विकल्प से हैंडल की स्थिति को बारीकी से समायोजित करेंshutter पर हैंडल कहाँ बैठता है, इसे बारीकी से समायोजित करने के लिए shift विकल्प से हैंडल को लंबवत या पार्श्व रूप से खिसकाएँ।
- framed, wall और base shutter पर profile handle लगाएँprofile handle के लिए side चुनें और framed, wall तथा base unit के लिए defaults और hinge नियमों पर भरोसा करें।
- drawer level पर drawer handle selector से handle जोड़ेंबिना placement या orientation सेटिंग्स बदले, एक drawer या एक साथ कई cabinets को handle असाइन करें।
- प्रत्येक drawer के अनुसार drawer हैंडल लगाएँ और हटाएँपूरे unit के लिए एक सामान्य हैंडल के बजाय प्रत्येक drawer को उसके अपने हैंडल के साथ कॉन्फ़िगर करें।
- किसी सरफेस हैंडल का स्थान बदलेंshutter चुनें और Shutter systems > Handle placement के अंतर्गत नया हैंडल स्थान चुनें।
- एक साथ कई unit के लिए handles और material बदलेंकई unit एक साथ चुनें और change material / interchange control से एक ही क्रिया में उनके finishes बदलें।
- curved panel और उनकी cutlist लंबाई को संभालेंएक curved panel को एक ही टुकड़े के रूप में मॉडल करें और cutlist तथा कोटेशन में उसकी समतल की गई खाली लंबाई देखें।
- panel hardware में handles और profile जोड़ेंhandle section के अंतर्गत handles जोड़ें और सूची से आवश्यक profile चुनें।
- Apply gola and profile handles with Modify HandleChoose a profile handle category and apply gola or profile handles to base, wall and individual units through Modify Handle.
- handle profile लागू करें और filler जोड़ेंअपने panel को अनुकूलित करने के लिए handle profile लागू करें और filler जोड़ें।
- gola side, बिना handle और placement परिवर्तन संभालेंvertical gola को door opening side का अनुसरण करने दें, handles को पूरी तरह हटाएँ, और shutter system के handle section से placement बदलें।
- दो units के बीच वर्टिकल गोला हैंडल कैसे साझा होता हैदेखें कि वर्टिकल गोला हैंडल दो सटे हुए units को कैसे जोड़ता है, दोनों side panels में रिसेस कैसे बनाता है, और उसे हटाने पर क्या होता है।
- नॉब, बार और गैस-लिफ्ट shutter के लिए हैंडल प्लेसमेंट सेट करें9-पोज़िशन ग्रिड पर सामान्य नॉब या बार हैंडल रखें और जानें कि गैस-लिफ्ट और double Lift Up shutter कौन-से प्लेसमेंट की अनुमति देते हैं।
- sliding wardrobe shutter पर handle के रूप में G profile लगाएँshutter के सामान्य handle application flow के माध्यम से sliding wardrobe shutter पर G profile handle लगाएँ।
- लाइब्रेरी फर्नीचर पर हैंडल का प्रकार बदलेंलाइब्रेरी से जोड़े गए फर्नीचर पर हैंडल का प्रकार बदलें, ताकि वह डिफ़ॉल्ट सरफ़ेस हैंडल न रखे।
- Handle resizing, extension और यह क्यों होता है कि handle बदलने पर custom sizes रीसेट हो जाते हैंकिसी रखे गए handle की width, height और depth override करें, profile handles पर left/right extension जोड़ें, और देखें कि handle item बदलने पर आपके customizations क्यों रीसेट हो जाते हैं।
- gola और FGP shrink shutter और drawer को कैसे संभालते हैंजानें कि gola और finger-groove handle item पर सेट reduction value के माध्यम से shutter और drawer front को स्वतः कैसे छोटा करते हैं।
- profile handle base unit में डिफ़ॉल्ट रूप से top पर और wall unit में bottom पर कैसे होता हैजानें कि profile handle base और wall unit के shutter पर डिफ़ॉल्ट रूप से कहाँ होता है और handle placement property इसे कब ओवरराइड करती है।
- finger-groove हैंडल की ऊँचाई कैसे सेट होती हैजानें कि finger-groove हैंडल की ऊँचाई कहाँ से आती है और इसके अनुपलब्ध होने पर क्या होता है।
- हैंडल रखें और उसकी ऊँचाई सेट करेंकिसी विशेष आकार का हैंडल रखें और बताएं कि वह किस ऊँचाई पर है।
- किसी handle को केवल तब घुमाएँ जब उसके SKU में left/right विकल्प होकिसी shutter handle को केवल तब flipped या घुमाएँ जब उसके SKU में left/right orientation विकल्प हो, फिर उसे horizontal या vertical सेट करें।
- Modify Handle के बाद चयनित shutter पर हैंडल की स्थिति सेट करेंModify Handle के माध्यम से कई चयनित कैबिनेट या wardrobe पर हैंडल लगाएँ, फिर चयनित shutter के लिए हैंडल की स्थिति सेट करें।
- handle carousel श्रेणियों और handle रंगों को समझेंजानें कि handle carousel Gola Handles, Handles और Profile Handles को कैसे समूहित करता है, और प्रत्येक handle रंग अपने अलग कार्ड के रूप में क्यों दिखता है।
- कैटलॉग पिकर में हैंडल क्यों छिपे रहते हैंजानें कि shutter के लिए पिकर से handle item, gola और profile-handle आइटम क्यों गायब हो जाते हैं और उन्हें कहाँ खोजें।
- shutter system config और catalog के माध्यम से profile shutter जोड़ें और handle बदलेंकिसी cabinet के parent partition में shutter system जोड़ें ताकि एक shutter स्वतः बन जाए।
- व्यक्तिगत shutter स्तर पर shutter design और हैंडल बदलेंकिसी व्यक्तिगत shutter को चुनें और उसका design या हैंडल बदलने के लिए "Shutter design" विकल्प का उपयोग करें।
- glass shutter बनाएं और profile handles जोड़ेंCustomize टैब में shutter panel का core material बदलकर glass core करें और उसे glass shutter में बदलें।
- कैबिनेट को profile हैंडल या handleless door में बदलेंडिज़ाइन के दौरान ही कैबिनेट को सामान्य हैंडल से profile हैंडल या handleless door में बदलें, बिना अलग catalogue या construction सेटअप के।
- door मॉडल, फ़िनिश और हैंडल बदलेंकैरोसेल से एक door मॉडल चुनें, फिर meshes और material से उसकी फ़िनिश और हैंडल सेट करें।
- R handle का उपयोग करके panel side को बढ़ाएँR handle का उपयोग करके panel को निर्दिष्ट मात्रा, जैसे 100 mm, तक बढ़ाएँ।
- properties में wardrobe shutter material, edge band, handle और placement बदलेंएक wardrobe चुनें और properties panel से उसके shutter material और finishes, edge bands, handles और handle placement बदलें।
- properties panel से countertop और handles बदलेंउनका countertop material और thickness बदलने या properties panel से उनके handles बदलने के लिए Select units।
- जाँचें कि Gola handle वाले shutter edge पर edgeband क्यों नहीं हैजानें कि Gola, profile या finger-groove handle उस shutter edge पर edgeband की जगह कैसे ले सकता है जिस पर वह लगा है, और इसे defect से कैसे अलग पहचानें।
- property tab से shutter, handle, drawer और material बदलेंproperty tab से shutter, handle, drawer और material बदलें और हर बदलाव को एक क्लिक में लागू होते देखें।
- wall के सिरे पर दिए गए गोल हैंडल से wall को खिसकाएँ या उसका आकार बदलेंwall के एक सिरे पर दिए गए गोल हैंडल पर क्लिक करें और wall को छोटा करने, बढ़ाने या उसकी स्थिति बदलने के लिए उसे खींचें।
- कैबिनेट पर internal finish और profile हैंडल सेट करेंConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.