손잡이
가이드: 46
- 셔터 시스템 수준에서 셔터 손잡이, 액세서리, 기구 및 디자인 변경셔터 시스템 수준에서 셔터의 손잡이, 기구 및 카탈로그 디자인을 변경합니다.
- 셔터 시스템 설정에서 손잡이 유형, 방향 및 위치 변경셔터 시스템 설정을 열어 손잡이 유형을 전환하고, 방향을 설정하고, 위치를 구성하세요.
- 셔터에 손잡이 프로파일 및 비손잡이 프로파일 추가프로파일 라이브러리에서 손잡이 또는 비손잡이 프로파일을 선택하여 선택한 셔터에 적용합니다.
- 셔터 손잡이 제거 또는 변경한 셔터에서 손잡이를 제거하거나 다른 손잡이를 선택한 다음 왼쪽 패널에서 설정을 조정하세요.
- Construction에서 Shutter Profile을 통해 손잡이 프로파일 추가Construction을 연 뒤 Shutter Profile을 열고 올바른 순서로 프로파일 유형을 선택하여 셔터 손잡이 프로파일을 구성하십시오.
- 셔터 시스템의 손잡이, 프로파일, 색상 및 유리를 구성합니다캐비닛 셔터 시스템의 손잡이 유형, 프로파일, 색상 및 유리 옵션을 선택하세요. 시스템 설정은 셔터별 편집과 별도로 유지됩니다.
- 모든 유닛 유형에 손가락 홈 패널 손잡이 적용손가락 홈 손잡이를 추가하면 홈이 도어에 파지고 몸체가 조정되며, 하부장, 키큰장, 서랍 모두에 적용됩니다.
- 핸들 프로파일과 비핸들 프로파일을 각각 독립적으로 적용합니다같은 프로파일을 두 번 입력하지 않고도 핸들 쪽 모서리와 나머지 모서리에 각각의 프로파일, 두께, 색상을 지정할 수 있습니다.
- 여러 캐비닛의 손잡이를 한 번에 변경캐비닛을 다중 선택하고 속성 패널의 'modify handle' 옵션을 사용하여 손잡이를 함께 변경하세요.
- 선택 트리에서 셔터 손잡이 삭제선택 트리에서 해당 항목을 삭제하여 셔터에서 손잡이를 제거합니다.
- shift 옵션으로 손잡이 위치 미세 조정배치된 손잡이를 shift 옵션으로 세로 또는 가로로 이동하여 도어에서의 위치를 미세 조정하세요.
- 프레임 도어, 벽면 유닛 및 하부 유닛의 도어에 프로파일 손잡이 배치프로파일 손잡이의 면을 선택하고, 프레임 유닛, 벽면 유닛 및 하부 유닛의 기본값과 경첩 규칙을 따르십시오.
- 서랍 손잡이 선택기로 서랍 레벨에서 손잡이를 추가하세요배치 또는 방향 설정을 건드리지 않고 하나의 서랍에, 또는 여러 캐비닛에 한 번에 손잡이를 지정할 수 있습니다.
- 서랍별로 서랍 손잡이 적용 및 제거전체 유닛에 하나의 공통 손잡이를 사용하는 대신 각 서랍에 개별 손잡이를 설정하세요.
- 표면 손잡이의 위치 변경셔터를 선택하고 Shutter systems > Handle placement에서 새 손잡이 위치를 선택하세요.
- 여러 유닛의 손잡이와 재질을 한 번에 변경여러 유닛을 함께 선택하고 change material / interchange 컨트롤로 한 번의 작업으로 마감재를 교체하세요.
- 곡면 패널과 그 재단 목록 길이 다루기곡면 패널을 하나의 조각으로 모델링하고, 재단 목록과 견적에서 펼친 원판 길이를 확인하세요.
- 패널 하드웨어에 손잡이와 프로파일 추가손잡이 섹션에서 손잡이를 추가하고 목록에서 필요한 프로파일을 선택하세요.
- Apply gola and profile handles with Modify HandleChoose a profile handle category and apply gola or profile handles to base, wall and individual units through Modify Handle.
- 손잡이 프로파일 적용 및 필러 추가손잡이 프로파일을 적용하고 필러를 추가하여 패널을 원하는 대로 설정하세요.
- 골라(gola) 측면, 손잡이 없음 및 배치 변경 처리수직 골라가 도어 개방 방향을 따르도록 하고, 손잡이를 완전히 제거하며, 셔터 시스템의 손잡이 섹션에서 배치를 변경할 수 있습니다.
- 수직 골라 핸들이 두 유닛 사이에서 공유되는 방식수직 골라 핸들이 인접한 두 유닛을 어떻게 연결하고 양쪽 측면 패널에 어떻게 홈을 만드는지, 그리고 이를 제거하면 어떻게 되는지 확인하십시오.
- 노브, 바 및 가스 리프트 셔터의 손잡이 위치 설정일반 노브 또는 바 손잡이를 9개 위치 그리드에 배치하고, 가스 리프트 및 Double Lift Up 셔터에서 허용되는 배치를 확인하세요.
- Apply a G profile as a handle on sliding wardrobe shuttersApply a G profile handle to a sliding wardrobe shutter through the normal handle application flow for the shutter.
- Change the handle type on library furnitureChange the handle type on furniture you added from the library so it no longer keeps the default surface handle.
- Handle resizing, extensions, and why custom sizes reset when switching handlesOverride a placed handle's width, height and depth, add left/right extensions on profile handles, and see why swapping the handle item resets your customizations.
- gola와 FGP가 셔터와 서랍을 줄이는 방식gola 및 핑거그루브 손잡이 항목이 손잡이 항목에 설정된 축소 값으로 셔터와 서랍 전면을 자동으로 줄이는 방식을 알아보세요.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- 손가락 홈 손잡이 높이가 설정되는 방식손가락 홈 손잡이의 높이가 어디에서 오는지, 그리고 높이가 없을 때 어떤 일이 발생하는지 알아보세요.
- Place a handle and set its heightPlace a handle of a particular size and specify the height at which it sits.
- Rotate a handle only when its SKU has a left/right optionFlip or rotate a shutter handle only if its SKU offers a left/right orientation option, then set it horizontal or vertical.
- Set handle position on selected shutters after Modify HandleApply a handle to several selected cabinets or wardrobes through Modify Handle, then set the handle position for the selected shutters.
- Understand handle carousel categories and handle coloursLearn how the handle carousel groups Gola Handles, Handles and Profile Handles, and why each handle colour appears as its own card.
- Why handles are hidden in the catalog pickerLearn why handle, gola and profile-handle items disappear from the picker for a shutter and where to find them.
- 셔터 시스템 구성 및 카탈로그를 통해 프로파일 셔터를 추가하고 손잡이를 변경하세요셔터가 자동으로 생성되도록 캐비닛의 상위 파티션에 셔터 시스템을 추가하세요.
- 개별 셔터 수준에서 셔터 디자인 및 손잡이 변경개별 셔터를 선택하고 "Shutter design" 옵션을 사용하여 디자인이나 손잡이를 변경하세요.
- 유리 셔터를 만들고 프로파일 손잡이를 추가하세요Customize 탭에서 셔터 패널의 심재를 유리 심재로 변경하여 셔터 패널을 유리 셔터로 바꾸세요.
- 캐비닛을 프로파일 손잡이 또는 손잡이 없는 도어로 전환디자인 중에 캐비닛을 일반 손잡이에서 프로파일 손잡이 또는 손잡이 없는 도어로 별도의 카탈로그나 구성 설정 없이 바로 변경하세요.
- 도어 모델, 마감재 및 손잡이 변경캐러셀에서 도어 모델을 선택한 다음 메시와 재질에서 마감재와 손잡이를 설정하세요.
- R 핸들을 사용하여 패널 측면을 연장합니다R 핸들을 사용하여 패널을 100 mm와 같이 지정된 양만큼 연장합니다.
- 속성에서 붙박이장 도어 재질, 엣지 밴드, 손잡이 및 배치 변경붙박이장을 선택하고 속성 패널에서 도어 재질과 마감, 엣지 밴드, 손잡이 및 손잡이 배치를 변경하세요.
- 속성 패널에서 상판과 손잡이 수정속성 패널에서 상판 재질과 두께를 변경하거나 손잡이를 교체하려면 Select units하세요.
- Gola 손잡이가 있는 셔터 모서리에 엣지밴드가 없는 이유 확인Gola, 프로파일 또는 핑거그루브 손잡이가 놓인 셔터 모서리에서 엣지밴드를 대체하는 방식과 이를 결함과 구별하는 방법을 알아보세요.
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Move or resize a wall with the circular end handleClick the circular handle at one end of a wall and drag it to shorten, extend or reposition the wall.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.