Apply and change handles on units

Apply gola or profile handles through Modify Handle and change handles on several units at once.

1. Gola and profile handles are applied through the Modify Handle option: open the handle carousel, choose the gola or profile handle type (for example G profile, H profile or a black J gola), pick the colour and apply; the same flow works for base units, wall units and individual units.

2. Handles can be changed on several selected wall units at once via the Modify Handle option.

   ✓ 2026년 10월 9일에 제품에서 확인됨

3. Handles can be changed on base or tall units by opening the Modify Handle option, removing the existing handle, and adding a new profile handle such as a black C profile handle.

4. To add a key or shutter system, remove the existing shutter system from the partition and add the required shutter system, then choose the component.

5. Different units can carry different profiles — for example a J profile on one unit and a C profile on another.

   ✓ 2026년 10월 10일에 제품에서 확인됨

6. The handle's placement (for example top or bottom) is changed from the handle section of the shutter system, not from the handle library item itself.

   ✓ 2026년 10월 10일에 제품에서 확인됨