取っ手
ガイド:46
- シャッターシステムレベルからシャッターハンドル、付属品、機構、デザインを変更するシャッターシステムレベルから、シャッターのハンドル、機構、カタログデザインを変更できます。
- シャッターシステム設定で取っ手の種類、向き、位置を変更するシャッターシステム設定を開くと、取っ手の種類の切り替え、向きの設定、位置の設定ができます。
- シャッターに取っ手付きプロファイルと取っ手なしプロファイルを追加するプロファイルライブラリから取っ手付きまたは取っ手なしのプロファイルを選び、選択したシャッターに適用します。
- シャッターの取っ手を削除または変更する1枚のシャッターから取っ手を取り外すか、別の取っ手を選択してから、左パネルでその設定を調整します。
- Construction から Shutter Profile を経てハンドルプロファイルを追加しますConstruction を開き、次に Shutter Profile を開いて、正しい順序でプロファイルの種類を選択すると、扉のハンドルプロファイルを設定できます。
- シャッターシステムの取っ手、プロファイル、色、ガラスを設定するキャビネットのシャッターシステムで取っ手の種類、プロファイル、色、ガラスのオプションを選択します。システム設定はシャッターごとの編集とは別であることに注意してください。
- あらゆるユニットタイプに指掛け溝パネル取手を取り付ける指掛け溝取手を追加すると、溝が扉板に切り込まれ、キャビネット本体が調整されます。ベースユニット、トールユニット、引き出しのいずれでも同様です。
- 取っ手用と取っ手なし用のプロファイルを個別に適用する同じプロファイルを二度入力せずに、取っ手側の端部と残りの端部にそれぞれ独自のプロファイル、厚さ、色を設定できます。
- 複数のキャビネットの取っ手をまとめて変更するキャビネットを複数選択し、プロパティパネルの'modify handle'オプションで取っ手をまとめて変更します。
- 選択ツリーから扉の取っ手を削除する選択ツリーの項目を削除して、扉から取っ手を取り外します。
- shiftオプションで取っ手の位置を微調整する配置した取っ手は、shiftオプションで縦方向または横方向に動かし、扉上の位置を微調整できます。
- 枠付き扉、吊戸棚、ベースユニットの扉にプロファイルハンドルを配置するプロファイルハンドルの側面を選択します。枠付きユニット、吊戸棚、ベースユニットでは、既定値とヒンジのルールに従います。
- Add a handle at drawer level with the drawer handle selectorAssign a handle to a single drawer, or to several cabinets at once, without touching placement or orientation settings.
- 引き出しごとに取っ手を取り付け、取り外すユニット全体で共通の取っ手を1つ使うのではなく、各引き出しに個別の取っ手を設定します。
- 面材の取っ手の位置を変更する扉を選択し、Shutter systems > Handle placement で新しい取っ手の位置を選びます。
- 複数のユニットの取っ手と素材を一度に変更する複数のユニットをまとめて選択し、change material / interchange コントロールで仕上げを一度に差し替えます。
- 曲面板とそのカットリストの長さを扱う曲面板を1枚の部材としてモデル化し、カットリストと見積でその展開時のブランク長さを確認できます。
- パネル金物に取っ手とプロファイルを追加する取っ手は取っ手セクションで追加し、リストから必要なプロファイルを選択します。
- Modify Handleでゴラハンドルとプロファイルハンドルを適用するプロファイルハンドルのカテゴリを選択し、Modify Handleからベースユニット、ウォールユニット、個別ユニットにゴラハンドルまたはプロファイルハンドルを適用します。
- ハンドルプロファイルを適用し、フィラーを追加するApply handle profiles and add fillers to customize your panels.
- ゴラの側面、取っ手なし、配置変更を扱う縦ゴラを扉の開き側に合わせ、取っ手を完全に削除し、扉システムの取っ手セクションから配置を変更できます。
- 縦型ゴラハンドルが2つのユニット間でどのように共有されるか縦型ゴラハンドルが隣接する2つのユニットをどのようにつなぎ、両方の側面パネルにどのように凹みを設けるか、またそれを取り外すとどうなるかをご覧ください。
- ノブ、バー、ガス昇降シャッターの取っ手の位置を設定する通常のノブまたはバーの取っ手を9ポジションのグリッドに配置し、ガス昇降シャッターとDouble Lift Upシャッターで許容される配置を確認します。
- Apply a G profile as a handle on sliding wardrobe shuttersApply a G profile handle to a sliding wardrobe shutter through the normal handle application flow for the shutter.
- Change the handle type on library furnitureChange the handle type on furniture you added from the library so it no longer keeps the default surface handle.
- 取っ手のサイズ変更、延長、および取っ手を切り替えるとカスタムサイズがリセットされる理由配置した取っ手の幅・高さ・奥行きを上書きし、プロファイル取っ手には左右の延長を追加できます。また、取っ手アイテムを交換するとカスタマイズがリセットされる理由を確認できます。
- golaとFGPが跳ね戸と引き出しの縮小を処理する方法golaと指掛け溝の取っ手アイテムが、取っ手アイテムに設定された縮小値によって跳ね戸と引き出し前板を自動的に短くする仕組みを説明します。
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- フィンガーグルーブハンドルの高さの設定方法フィンガーグルーブハンドルの高さがどこから取得されるか、また高さが設定されていない場合にどうなるかを説明します。
- Place a handle and set its heightPlace a handle of a particular size and specify the height at which it sits.
- Rotate a handle only when its SKU has a left/right optionFlip or rotate a shutter handle only if its SKU offers a left/right orientation option, then set it horizontal or vertical.
- Set handle position on selected shutters after Modify HandleApply a handle to several selected cabinets or wardrobes through Modify Handle, then set the handle position for the selected shutters.
- Understand handle carousel categories and handle coloursLearn how the handle carousel groups Gola Handles, Handles and Profile Handles, and why each handle colour appears as its own card.
- Why handles are hidden in the catalog pickerLearn why handle, gola and profile-handle items disappear from the picker for a shutter and where to find them.
- Add profile shutters and change handles via shutter system config and catalogAdd a shutter system to a cabinet's parent partition so a shutter is created automatically.
- Change shutter design and handle at individual shutter levelSelect an individual shutter and use the "Shutter design" option to change its design or handle.
- ガラス扉を作成し、プロファイル取手を追加するカスタマイズタブで芯材をガラス芯材に切り替えると、扉パネルをガラス扉にできます。
- キャビネットをプロファイル取っ手または取っ手なし扉に切り替えるデザイン中にキャビネットを通常の取っ手からプロファイル取っ手または取っ手なし扉へ直接変更できます。別途カタログや構造設定は不要です。
- 扉のモデル、仕上げ、取っ手を変更するカルーセルから扉のモデルを選び、メッシュとマテリアルから仕上げと取っ手を設定します。
- Rハンドルを使用してパネルの側面を延長するRハンドルを使用して、100 mm など指定した量だけパネルを延長します。
- プロパティでワードローブの扉材質、エッジバンド、取っ手、配置を変更するワードローブを選択し、プロパティパネルから扉の材質と仕上げ、エッジバンド、取っ手、取っ手の配置を変更します。
- プロパティパネルから天板と取っ手を変更するSelect unitsで、プロパティパネルから天板の素材と厚さを変更したり、取っ手を交換したりできます。
- Golaハンドル使用時にシャッター端部にエッジバンドがない理由を確認するGola、プロファイル、フィンガーグルーブハンドルが、それが取り付けられるシャッター端部のエッジバンドの代わりになる仕組みと、それを不具合と区別する方法を学びます。
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Move or resize a wall with the circular end handleClick the circular handle at one end of a wall and drag it to shorten, extend or reposition the wall.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.