Handles
Guides: 46
- Change shutter handle, accessory, mechanism and design from shutter system levelChange the handle, mechanism and catalogue design of a shutter from the shutter system level.
- Change handle type, orientation and position via shutter system settingsOpen the shutter system settings to switch handle types, set orientation and configure position.
- Add handle and non-handle profiles to a shutterPick a handle or non-handle profile from the profile library and apply it to the selected shutter.
- Remove or change a shutter handleTake the handle off one shutter or pick a different handle, then adjust its settings in the left panel.
- Add handle profiles via Construction then Shutter ProfileConfigure shutter handle profiles by opening Construction then Shutter Profile and selecting the profile types in the correct sequence.
- Configure a shutter system's handles, profiles, colours and glassChoose the handle type, profile, colour and glass options for a cabinet shutter system, knowing the system setting stays separate from per-shutter edits.
- Apply finger groove panel handles to any unit typeAdd a finger-groove handle so its groove is cut into the shutter and the carcass adjusts, on base units, tall units and drawers alike.
- Apply handle and non-handle profiles independentlyGive the handle edge and the remaining edges their own profile, thickness and colour without entering the same profile twice.
- Change handles on several cabinets at onceMulti-select the cabinets and use the 'modify handle' option in the properties panel to change their handles together.
- Delete a shutter handle from the selection treeRemove a handle from a shutter by deleting its entry in the selection tree.
- Fine-tune handle position with the shift optionMove a placed handle vertically or laterally with the shift option to fine-tune where it sits on the shutter.
- Place profile handles on framed, wall and base shuttersChoose the side for a profile handle and rely on the defaults and hinge rules for framed, wall and base units.
- Add a handle at drawer level with the drawer handle selectorAssign a handle to a single drawer, or to several cabinets at once, without touching placement or orientation settings.
- Apply and remove drawer handles per drawerConfigure each drawer with its own handle instead of one common handle for the whole unit.
- Change a surface handle's placementSelect the shutter and choose a new handle position under Shutter systems > Handle placement.
- Change handles and materials for multiple units at onceSelect several units together and swap their finishes in a single action with the change material / interchange control.
- Handle curved panels and their cutlist lengthModel a curved panel as one piece and read its flattened blank length in the cutlist and quotation.
- Add handles and profiles to panel hardwareAdd handles under the handle section and select the required profile from the list.
- Apply gola and profile handles with Modify HandleChoose a profile handle category and apply gola or profile handles to base, wall and individual units through Modify Handle.
- Apply handle profiles and add fillersApply handle profiles and add fillers to customize your panels.
- Handle gola sides, no handle and placement changesLet a vertical gola follow the door opening side, remove handles entirely, and change placement from the shutter system's handle section.
- How a vertical gola handle is shared between two unitsSee how a vertical gola handle links two adjacent units, recesses both side panels, and what happens when it is removed.
- Set handle placement for knob, bar and gas-lift shuttersPlace normal knob or bar handles on the 9-position grid and know which placements gas-lift and Double Lift Up shutters allow.
- Apply a G profile as a handle on sliding wardrobe shuttersApply a G profile handle to a sliding wardrobe shutter through the normal handle application flow for the shutter.
- Change the handle type on library furnitureChange the handle type on furniture you added from the library so it no longer keeps the default surface handle.
- Handle resizing, extensions, and why custom sizes reset when switching handlesOverride a placed handle's width, height and depth, add left/right extensions on profile handles, and see why swapping the handle item resets your customizations.
- How gola and FGP handles shrink shutters and drawersLearn how gola and finger-groove handle items automatically shorten shutters and drawer fronts through reduction values set on the handle item.
- How profile handles default to top on base units and bottom on wall unitsLearn where a profile handle sits by default on base and wall unit shutters and when the handle placement property overrides it.
- How the finger-groove handle height is setLearn where the finger-groove handle's height comes from and what happens when it is missing.
- Place a handle and set its heightPlace a handle of a particular size and specify the height at which it sits.
- Rotate a handle only when its SKU has a left/right optionFlip or rotate a shutter handle only if its SKU offers a left/right orientation option, then set it horizontal or vertical.
- Set handle position on selected shutters after Modify HandleApply a handle to several selected cabinets or wardrobes through Modify Handle, then set the handle position for the selected shutters.
- Understand handle carousel categories and handle coloursLearn how the handle carousel groups Gola Handles, Handles and Profile Handles, and why each handle colour appears as its own card.
- Why handles are hidden in the catalog pickerLearn why handle, gola and profile-handle items disappear from the picker for a shutter and where to find them.
- Add profile shutters and change handles via shutter system config and catalogAdd a shutter system to a cabinet's parent partition so a shutter is created automatically.
- Change shutter design and handle at individual shutter levelSelect an individual shutter and use the "Shutter design" option to change its design or handle.
- Create glass shutters and add profile handlesTurn a shutter panel into a glass shutter by switching its core material to a glass core in the Customize tab.
- Switch a cabinet to profile handles or a handleless doorChange a cabinet from normal handles to profile handles or a handleless door directly during design, with no separate catalogue or construction setup.
- Change door model, finish and handlePick a door model from the carousel, then set its finish and handle from meshes and materials.
- Extend a panel side using the R handleExtend a panel by a specified amount, such as 100 mm, using the R handle.
- Change wardrobe shutter material, edge band, handle and placement in propertiesSelect a wardrobe and change its shutter materials and finishes, edge bands, handles and handle placement from the properties panel.
- Modify countertop and handles from the properties panelSelect units to change their countertop material and thickness or swap their handles from the properties panel.
- Check why a shutter edge has no edgeband with a Gola handleLearn how a Gola, profile or finger-groove handle can replace the edgeband on the shutter edge it sits on, and how to tell that from a defect.
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Move or resize a wall with the circular end handleClick the circular handle at one end of a wall and drag it to shorten, extend or reposition the wall.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.