పారామెట్రిక్ ఎక్స్ప్రెషన్లు మరియు కాంపోనెంట్లు
గైడ్లు: 17
- Place hob and sink components using axis and countertop levelPosition a hob with the XYZ axis at its Furniture/Light Unit level and add a sink with the Sink option at the countertop level.
- డిజైన్ మాడ్యూల్లో క్యాబినెట్ భాగాలను సవరించండిప్రాపర్టీల ట్యాబ్, క్విక్ యాక్సెస్, కస్టమైజ్, కన్స్ట్రక్షన్ ట్యాబ్ లేదా సెలెక్షన్ ట్రీ నుండి ఒకే క్యాబినెట్ యొక్క ఫినిష్లు, మెటీరియల్స్, స్కర్టింగ్ మరియు అంతర్గత ఫినిష్లను మార్చండి.
- అంతర్గత హార్డ్వేర్ భాగాలను పరిశీలించడానికి X-ray మోడ్ను ఉపయోగించండినిర్మాణ సమీక్ష సమయంలో మినిఫిక్స్ భాగాల వంటి అంతర్గత హార్డ్వేర్ను తనిఖీ చేయడానికి, ధృవీకరించడానికి అవి కనిపించేలా చేయడానికి X-ray మోడ్ను ఆన్ చేయండి.
- Make a component and confirm it is placed in the designCreate a component and check that it is confirmed, listed under Components in Design and placed as a copy you can select.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Move a component along the X, Y or Z axisLearn which direction the X, Y and Z axes run so you can move a component along a specific axis using the directions.
- Component Editor డ్రిల్ ఆపరేషన్లో డ్రిల్ లోతు మరియు వ్యాసాన్ని సెట్ చేయండిఒక కాంపోనెంట్పై డ్రిల్ రంధ్రాన్ని డ్రిల్ ఆపరేషన్గా నిర్వచించి, దాని లోతు మరియు వ్యాసం ఫీల్డ్లను సెట్ చేయండి.
- Start making a component from the floor planOpen the Components panel from the floor plan to create a new component or import one from a DWG, then select objects and set a base point.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- డిజైన్ను తెరిచినప్పుడు 'Added missing components' అనే వెర్షన్ ఎందుకు కనిపిస్తుందిడిజైన్ను తెరవడం మాత్రమే 'Added missing components' అనే వెర్షన్ను ఎందుకు సృష్టిస్తుందో తెలుసుకోండి.
- Why an automated component rule does not runAn automated rule in the component editor only executes when the geometry it depends on is present in the SKU.
- లాఫ్ట్ ఫ్రేమ్ మరియు బాక్స్ కాంపోనెంట్లను ఉపయోగించి వార్డ్రోబ్ లాఫ్ట్ను సృష్టించండిషట్టర్ సిస్టమ్ నిర్మాణం ద్వారా తెరిచే దిశను సర్దుబాటు చేయండి మరియు తెరిచే దిశను టోగుల్ చేయండి.
- రెండు క్యాబినెట్లను ఒకే యూజర్ కాంపోనెంట్గా కలపండిరెండు వేర్వేరు క్యాబినెట్లను ఒకే యూనిట్గా ప్రవర్తించే ఒక యూజర్ కాంపోనెంట్గా కలపండి.
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- How converting a design group to a user component worksConverting a design group to a user component cannot be undone directly, and dimensions on the component are kept.