Expressions et composants paramétriques
Guides : 17
- Placer les composants plaque de cuisson et évier à l'aide de l'axe et du niveau du plan de travailPositionnez une plaque de cuisson avec l'axe XYZ à son niveau Furniture/Light Unit et ajoutez un évier avec l'option Sink au niveau du plan de travail.
- Modifier les composants d'un caisson dans le module de conceptionModifiez les finitions, les matériaux, la plinthe et les finitions intérieures d'un seul caisson depuis l'onglet des propriétés, l'accès rapide, personnaliser, l'onglet construction ou l'arborescence de sélection.
- Utilisez le mode radiographie pour inspecter les composants internes du hardwareActivez le mode radiographie pour rendre visibles les composants internes du hardware, comme les minifix, afin de pouvoir les contrôler et les vérifier lors de la revue de construction.
- Make a component and confirm it is placed in the designCreate a component and check that it is confirmed, listed under Components in Design and placed as a copy you can select.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Move a component along the X, Y or Z axisLearn which direction the X, Y and Z axes run so you can move a component along a specific axis using the directions.
- Définir la profondeur et le diamètre de perçage dans l'opération de perçage de l'éditeur de composantsDéfinissez un trou de perçage sur un composant comme une opération de perçage et renseignez ses champs de profondeur et de diamètre.
- Start making a component from the floor planOpen the Components panel from the floor plan to create a new component or import one from a DWG, then select objects and set a base point.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- Pourquoi une version nommée 'Added missing components' apparaît à l'ouverture d'un designDécouvrez pourquoi le simple fait d'ouvrir un design peut créer une version nommée 'Added missing components'.
- Why an automated component rule does not runAn automated rule in the component editor only executes when the geometry it depends on is present in the SKU.
- Create a wardrobe loft using loft frame and box componentsAdjust the opening direction via shutter system construction and toggle opening direction.
- Combiner deux caissons en un seul composant utilisateurCombinez deux caissons distincts en un seul composant utilisateur qui se comporte comme une unité.
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- How converting a design group to a user component worksConverting a design group to a user component cannot be undone directly, and dimensions on the component are kept.