પેરામેટ્રિક એક્સપ્રેશન્સ અને ઘટકો
માર્ગદર્શિકાઓ: 17
- એક્સિસ અને કાઉન્ટરટોપ લેવલનો ઉપયોગ કરીને હોબ અને સિંક ઘટકો મૂકોહોબને તેના Furniture/Light Unit લેવલ પર XYZ એક્સિસ સાથે સ્થિત કરો અને કાઉન્ટરટોપ લેવલ પર Sink વિકલ્પ સાથે સિંક ઉમેરો.
- ડિઝાઇન મોડ્યુલમાં કેબિનેટના ઘટકોમાં ફેરફાર કરોપ્રોપર્ટીઝ ટૅબ, ક્વિક એક્સેસ, કસ્ટમાઇઝ, કન્સ્ટ્રક્શન ટૅબ અથવા સિલેક્શન ટ્રીમાંથી એક જ કેબિનેટના ફિનિશ, મટીરિયલ, સ્કર્ટિંગ અને આંતરિક ફિનિશ બદલો.
- આંતરિક હાર્ડવેર ઘટકોની તપાસ માટે X-ray મોડનો ઉપયોગ કરોX-ray મોડ ચાલુ કરો જેથી મિનિફિક્સ ઘટકો જેવા આંતરિક હાર્ડવેર દેખાય, અને બાંધણી સમીક્ષા દરમિયાન તમે તેને ચકાસી અને પ્રમાણિત કરી શકો.
- Make a component and confirm it is placed in the designCreate a component and check that it is confirmed, listed under Components in Design and placed as a copy you can select.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Move a component along the X, Y or Z axisLearn which direction the X, Y and Z axes run so you can move a component along a specific axis using the directions.
- Component Editor માં drill operation માં drill depth અને diameter સેટ કરોઘટક પર drill hole ને drill operation તરીકે વ્યાખ્યાયિત કરો અને તેના depth અને diameter ફીલ્ડ સેટ કરો.
- Start making a component from the floor planOpen the Components panel from the floor plan to create a new component or import one from a DWG, then select objects and set a base point.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- ડિઝાઇન ખોલતી વખતે 'Added missing components' નામનું વર્ઝન કેમ દેખાય છેફક્ત ડિઝાઇન ખોલવાથી 'Added missing components' નામનું વર્ઝન કેમ બને છે તે જાણો.
- Why an automated component rule does not runAn automated rule in the component editor only executes when the geometry it depends on is present in the SKU.
- Create a wardrobe loft using loft frame and box componentsAdjust the opening direction via shutter system construction and toggle opening direction.
- બે કેબિનેટને એક જ વપરાશકર્તા ઘટકમાં જોડોબે અલગ કેબિનેટને એક જ વપરાશકર્તા ઘટકમાં જોડો, જે એક જ એકમ તરીકે વર્તે.
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- How converting a design group to a user component worksConverting a design group to a user component cannot be undone directly, and dimensions on the component are kept.