പാരാമെട്രിക് എക്സ്പ്രഷനുകളും കോംപോണന്റുകളും
ഗൈഡുകൾ: 17
- ആക്സിസും കൗണ്ടർടോപ്പ് ലെവലും ഉപയോഗിച്ച് ഹോബ്, സിങ്ക് ഘടകങ്ങൾ സ്ഥാപിക്കുകഒരു ഹോബ് അതിന്റെ Furniture/Light Unit ലെവലിൽ XYZ ആക്സിസ് ഉപയോഗിച്ച് സ്ഥാപിക്കുക, കൂടാതെ കൗണ്ടർടോപ്പ് ലെവലിൽ Sink ഓപ്ഷൻ ഉപയോഗിച്ച് ഒരു സിങ്ക് ചേർക്കുക.
- ഡിസൈൻ മൊഡ്യൂളിൽ കാബിനറ്റ് ഘടകങ്ങൾ എഡിറ്റ് ചെയ്യുകproperties ടാബ്, quick access, customize, construction ടാബ് അല്ലെങ്കിൽ selection tree എന്നിവയിൽ നിന്ന് ഒരു കാബിനറ്റിന്റെ ഫിനിഷുകൾ, മെറ്റീരിയലുകൾ, സ്കർട്ടിംഗ്, ആന്തരിക ഫിനിഷുകൾ എന്നിവ മാറ്റുക.
- ആന്തരിക ഹാർഡ്വെയർ ഘടകങ്ങൾ പരിശോധിക്കാൻ X-ray മോഡ് ഉപയോഗിക്കുകനിർമ്മാണ അവലോകനത്തിൽ പരിശോധിച്ച് സ്ഥിരീകരിക്കാൻ കഴിയുന്ന വിധത്തിൽ മിനിഫിക്സ് ഘടകങ്ങൾ പോലുള്ള ആന്തരിക ഹാർഡ്വെയർ ദൃശ്യമാക്കാൻ X-ray മോഡ് ഓണാക്കുക.
- Make a component and confirm it is placed in the designCreate a component and check that it is confirmed, listed under Components in Design and placed as a copy you can select.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Move a component along the X, Y or Z axisLearn which direction the X, Y and Z axes run so you can move a component along a specific axis using the directions.
- കോംപോണന്റ് എഡിറ്ററിലെ ഡ്രിൽ ഓപ്പറേഷനിൽ ഡ്രിൽ ആഴവും വ്യാസവും സജ്ജമാക്കുകഒരു കോംപോണന്റിലെ ഡ്രിൽ ദ്വാരം ഒരു ഡ്രിൽ ഓപ്പറേഷനായി നിർവചിച്ച് അതിന്റെ ഡെപ്ത്, ഡയാമീറ്റർ ഫീൽഡുകൾ സജ്ജമാക്കുക.
- Start making a component from the floor planOpen the Components panel from the floor plan to create a new component or import one from a DWG, then select objects and set a base point.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- ഒരു ഡിസൈൻ തുറക്കുമ്പോൾ 'Added missing components' എന്ന പേരിലുള്ള ഒരു പതിപ്പ് എന്തുകൊണ്ട് പ്രത്യക്ഷപ്പെടുന്നുഒരു ഡിസൈൻ വെറുതെ തുറക്കുന്നത് 'Added missing components' എന്ന പേരിലുള്ള ഒരു പതിപ്പ് എന്തുകൊണ്ട് സൃഷ്ടിക്കുന്നു എന്ന് അറിയുക.
- Why an automated component rule does not runAn automated rule in the component editor only executes when the geometry it depends on is present in the SKU.
- ലോഫ്റ്റ് ഫ്രെയിം, ബോക്സ് ഘടകങ്ങൾ ഉപയോഗിച്ച് ഒരു വാർഡ്രോബ് ലോഫ്റ്റ് സൃഷ്ടിക്കുകഷട്ടർ സിസ്റ്റം നിർമ്മാണത്തിലൂടെയും ഓപ്പണിംഗ് ദിശ ടോഗിൾ ചെയ്തും തുറക്കുന്ന ദിശ ക്രമീകരിക്കുക.
- രണ്ട് കാബിനറ്റുകൾ ഒരു ഉപയോക്തൃ ഘടകമായി സംയോജിപ്പിക്കുകരണ്ട് വേറിട്ട കാബിനറ്റുകൾ ഒരൊറ്റ യൂണിറ്റായി പ്രവർത്തിക്കുന്ന ഒരു ഉപയോക്തൃ ഘടകമായി സംയോജിപ്പിക്കുക.
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- How converting a design group to a user component worksConverting a design group to a user component cannot be undone directly, and dimensions on the component are kept.