পেৰামেট্ৰিক এক্সপ্ৰেছন আৰু কম্পোনেণ্ট
গাইড: 17
- অক্ষ আৰু কাউণ্টাৰটপ স্তৰ ব্যৱহাৰ কৰি হব আৰু ছিংক উপাদান স্থাপন কৰকXYZ অক্ষৰ সৈতে হব এটা ইয়াৰ Furniture/Light Unit স্তৰত স্থাপন কৰক আৰু কাউণ্টাৰটপ স্তৰত Sink বিকল্পৰ সৈতে ছিংক এটা যোগ কৰক।
- ডিজাইন মডিউলত কেবিনেটৰ উপাদানসমূহ সম্পাদনা কৰকএটা কেবিনেটৰ ফিনিছ, সামগ্ৰী, স্কাৰ্টিং আৰু আভ্যন্তৰীণ ফিনিছ properties টেব, quick access, customize, construction টেব বা selection tree ৰ পৰা সলনি কৰক।
- অভ্যন্তৰীণ হাৰ্ডৱেৰ উপাদান পৰীক্ষা কৰিবলৈ X-ray ম'ড ব্যৱহাৰ কৰকX-ray ম'ড অন কৰিলে মিনিফিক্সৰ দৰে অভ্যন্তৰীণ হাৰ্ডৱেৰ দৃশ্যমান হয়, যাতে নিৰ্মাণ পৰ্যালোচনাৰ সময়ত সেইবোৰ পৰীক্ষা আৰু সত্যাপন কৰিব পাৰি।
- Make a component and confirm it is placed in the designCreate a component and check that it is confirmed, listed under Components in Design and placed as a copy you can select.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Move a component along the X, Y or Z axisLearn which direction the X, Y and Z axes run so you can move a component along a specific axis using the directions.
- কম্পোনেন্ট এডিটৰৰ ড্ৰিল অপাৰেশ্যনত ড্ৰিলৰ গভীৰতা আৰু ব্যাস নিৰ্ধাৰণ কৰককম্পোনেন্টত এটা ড্ৰিল ছিদ্ৰ ড্ৰিল অপাৰেশ্যন হিচাপে সংজ্ঞায়িত কৰক আৰু ইয়াৰ গভীৰতা আৰু ব্যাসৰ ফীল্ডসমূহ নিৰ্ধাৰণ কৰক।
- Start making a component from the floor planOpen the Components panel from the floor plan to create a new component or import one from a DWG, then select objects and set a base point.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- ডিজাইন খোলাৰ সময়ত 'Added missing components' নামৰ এটা সংস্কৰণ কিয় দেখা যায়কেৱল এটা ডিজাইন খোলাৰ ফলত 'Added missing components' নামৰ এটা সংস্কৰণ কেনেকৈ সৃষ্টি হয়, সেয়া জানক।
- Why an automated component rule does not runAn automated rule in the component editor only executes when the geometry it depends on is present in the SKU.
- লফ্ট ফ্ৰেম আৰু বক্স উপাদান ব্যৱহাৰ কৰি ৱাৰড্ৰবৰ বাবে এটা লফ্ট সৃষ্টি কৰকশ্বাটাৰ চিষ্টেমৰ গঠনৰ জৰিয়তে খোলাৰ দিশ সমন্বয় কৰক আৰু খোলাৰ দিশ টগল কৰক।
- দুটা কেবিনেটক এটা ব্যৱহাৰকাৰী কম্পোনেন্টত একত্ৰিত কৰকদুটা পৃথক কেবিনেটক এটা ব্যৱহাৰকাৰী কম্পোনেন্টত একত্ৰিত কৰক, যি এটা একক একক হিচাপে কাম কৰে।
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- How converting a design group to a user component worksConverting a design group to a user component cannot be undone directly, and dimensions on the component are kept.