প্যারামেট্রিক এক্সপ্রেশন ও কম্পোনেন্ট
গাইড: 17
- অক্ষ এবং কাউন্টারটপ স্তর ব্যবহার করে হব ও সিঙ্ক কম্পোনেন্ট স্থাপন করুনএর Furniture/Light Unit স্তরে XYZ অক্ষসহ একটি হব স্থাপন করুন এবং কাউন্টারটপ স্তরে Sink অপশন দিয়ে একটি সিঙ্ক যোগ করুন।
- ডিজাইন মডিউলে ক্যাবিনেটের উপাদান সম্পাদনা করুনproperties ট্যাব, quick access, customize, construction ট্যাব বা selection tree থেকে একটি ক্যাবিনেটের ফিনিশ, মেটেরিয়াল, স্কার্টিং এবং অভ্যন্তরীণ ফিনিশ পরিবর্তন করুন।
- অভ্যন্তরীণ হার্ডওয়্যার যন্ত্রাংশ পরিদর্শন করতে X-ray মোড ব্যবহার করুনX-ray মোড চালু করলে মিনিফিক্সের মতো অভ্যন্তরীণ হার্ডওয়্যার দৃশ্যমান হয়, যাতে নির্মাণ পর্যালোচনার সময় সেগুলো পরীক্ষা ও যাচাই করতে পারেন।
- Make a component and confirm it is placed in the designCreate a component and check that it is confirmed, listed under Components in Design and placed as a copy you can select.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Move a component along the X, Y or Z axisLearn which direction the X, Y and Z axes run so you can move a component along a specific axis using the directions.
- কম্পোনেন্ট এডিটরে ড্রিল অপারেশনে ড্রিলের গভীরতা ও ব্যাস সেট করুনকম্পোনেন্টে একটি ড্রিল হোল ড্রিল অপারেশন হিসেবে নির্ধারণ করুন এবং এর depth ও diameter ফিল্ড সেট করুন।
- Start making a component from the floor planOpen the Components panel from the floor plan to create a new component or import one from a DWG, then select objects and set a base point.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- একটি ডিজাইন খোলার সময় 'Added missing components' নামের একটি সংস্করণ কেন দেখা যায়শুধু একটি ডিজাইন খোলার ফলে 'Added missing components' নামের একটি সংস্করণ কীভাবে তৈরি হতে পারে তা জানুন।
- Why an automated component rule does not runAn automated rule in the component editor only executes when the geometry it depends on is present in the SKU.
- লফট ফ্রেম এবং বক্স কম্পোনেন্ট ব্যবহার করে ওয়ারড্রোবের লফট তৈরি করুনশাটার সিস্টেম কনস্ট্রাকশন এবং টগল ওপেনিং ডিরেকশন দিয়ে খোলার দিক সমন্বয় করুন।
- দুটি ক্যাবিনেটকে একটি একক ইউজার কম্পোনেন্টে একত্র করুনদুটি আলাদা ক্যাবিনেটকে একটি ইউজার কম্পোনেন্টে একত্র করুন, যা একটি একক ইউনিট হিসেবে কাজ করবে।
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- How converting a design group to a user component worksConverting a design group to a user component cannot be undone directly, and dimensions on the component are kept.