ପାରାମେଟ୍ରିକ ଅଭିବ୍ୟକ୍ତି ଏବଂ ଉପାଦାନ
ଗାଇଡ୍: 17
- ଅକ୍ଷ ଏବଂ କାଉଣ୍ଟରଟପ୍ ସ୍ତର ବ୍ୟବହାର କରି ହବ୍ ଏବଂ ସିଙ୍କ୍ ଉପାଦାନଗୁଡ଼ିକ ସ୍ଥାପନ କରନ୍ତୁଏକ ହବ୍କୁ ଏହାର Furniture/Light Unit ସ୍ତରରେ XYZ ଅକ୍ଷ ସହିତ ସ୍ଥାପନ କରନ୍ତୁ ଏବଂ କାଉଣ୍ଟରଟପ୍ ସ୍ତରରେ Sink ବିକଳ୍ପ ସହିତ ଏକ ସିଙ୍କ୍ ଯୋଡ଼ନ୍ତୁ।
- ଡିଜାଇନ ମଡ୍ୟୁଲରେ କ୍ୟାବିନେଟ ଉପାଦାନଗୁଡ଼ିକୁ ସମ୍ପାଦନ କରନ୍ତୁପ୍ରପର୍ଟିଜ ଟ୍ୟାବ, କୁଇକ ଆକ୍ସେସ, କଷ୍ଟମାଇଜ, କନଷ୍ଟ୍ରକ୍ସନ ଟ୍ୟାବ କିମ୍ବା ସିଲେକ୍ସନ ଟ୍ରିରୁ ଏକ କ୍ୟାବିନେଟର ଫିନିଶ, ମ୍ୟାଟେରିଆଲ, ସ୍କର୍ଟିଂ ଏବଂ ଆଭ୍ୟନ୍ତରୀଣ ଫିନିଶ ବଦଳାନ୍ତୁ।
- ଆଭ୍ୟନ୍ତରୀଣ ହାର୍ଡୱେର ଉପାଦାନ ଯାଞ୍ଚ କରିବାକୁ X-ray ମୋଡ୍ ବ୍ୟବହାର କରନ୍ତୁନିର୍ମାଣ ସମୀକ୍ଷା ସମୟରେ ଯାଞ୍ଚ ଓ ସତ୍ୟାପନ କରିବା ପାଇଁ ମିନିଫିକ୍ସ ଭଳି ଆଭ୍ୟନ୍ତରୀଣ ହାର୍ଡୱେର ଦୃଶ୍ୟମାନ କରିବାକୁ X-ray ମୋଡ୍ ଚାଲୁ କରନ୍ତୁ।
- Make a component and confirm it is placed in the designCreate a component and check that it is confirmed, listed under Components in Design and placed as a copy you can select.
- Make components resize automatically with the cabinetSet the right parameters on a component so it resizes automatically when its parent cabinet or bed changes size.
- Move a component along the X, Y or Z axisLearn which direction the X, Y and Z axes run so you can move a component along a specific axis using the directions.
- କମ୍ପୋନେଣ୍ଟ ଏଡିଟର ଡ୍ରିଲ ଅପରେସନରେ ଡ୍ରିଲ ଗଭୀରତା ଏବଂ ବ୍ୟାସ ସେଟ କରନ୍ତୁଏକ କମ୍ପୋନେଣ୍ଟ ଉପରେ ଏକ ଡ୍ରିଲ ଛିଦ୍ରକୁ ଡ୍ରିଲ ଅପରେସନ ଭାବରେ ପରିଭାଷିତ କରନ୍ତୁ ଏବଂ ଏହାର depth ଏବଂ diameter ଫିଲ୍ଡ ସେଟ କରନ୍ତୁ।
- Start making a component from the floor planOpen the Components panel from the floor plan to create a new component or import one from a DWG, then select objects and set a base point.
- Understand component origin relative to the parent cabinetLearn that a custom panel or component's XYZ origin is relative to its cabinet, not the entire drawing.
- ଏକ design ଖୋଲିବା ସମୟରେ 'Added missing components' ନାମକ ଏକ version କାହିଁକି ଦେଖାଯାଏକେବଳ ଏକ design ଖୋଲିବା ଦ୍ୱାରା 'Added missing components' ନାମକ ଏକ version କିପରି ସୃଷ୍ଟି ହୋଇପାରେ ତାହା ଜାଣନ୍ତୁ।
- Why an automated component rule does not runAn automated rule in the component editor only executes when the geometry it depends on is present in the SKU.
- ଲଫ୍ଟ ଫ୍ରେମ ଏବଂ ବକ୍ସ କମ୍ପୋନେଣ୍ଟ ବ୍ୟବହାର କରି ୱାର୍ଡ୍ରୋବ ଲଫ୍ଟ ତିଆରି କରନ୍ତୁଶଟର ସିଷ୍ଟମ କନଷ୍ଟ୍ରକ୍ସନ ମାଧ୍ୟମରେ ଖୋଲିବା ଦିଶା ସମାୟୋଜିତ କରନ୍ତୁ ଏବଂ ଖୋଲିବା ଦିଶା ଟୋଗଲ କରନ୍ତୁ।
- ଦୁଇଟି କ୍ୟାବିନେଟକୁ ଏକକ ବ୍ୟବହାରକାରୀ ଉପାଦାନରେ ମିଶ୍ରଣ କରନ୍ତୁଦୁଇଟି ଅଲଗା କ୍ୟାବିନେଟକୁ ଏକକ ଏକକ ପରି ବ୍ୟବହାର କରୁଥିବା ଏକ ବ୍ୟବହାରକାରୀ ଉପାଦାନରେ ମିଶ୍ରଣ କରନ୍ତୁ।
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Convert a modular unit to a user component via common modular unit actionsSelect several standard modular units together and turn them into one reusable user component.
- Edit an existing cabinet SKU in the component editorOpen an existing cabinet SKU with the edit SKU action so its saved construction loads in the component editor ready to adjust.
- How converting a design group to a user component worksConverting a design group to a user component cannot be undone directly, and dimensions on the component are kept.