사용자 지정 형상 및 솔리드
가이드: 37
- Add custom support panels and set back panel offset and groovingAdd a support panel with its own core material, finish and label, and configure the back panel offset and grooving depth in the extension parameters.
- Add a custom construction unit from the catalogue warehouse to a designBring a warehouse base unit into your catalogue so it appears under furnish in the design portal.
- Use custom finish and match property to copy a finish onto a panelApply a specific finish to a panel whose external finish is source-driven by selecting the panel, opening external finish source and choosing custom finish.
- 스윕 프로파일을 파라미터화하기 위해 기본 형상 경로 편집스윕 또는 반복 프로파일의 시작점을 파라미터화하여 프로파일이 디자인에 따라 업데이트되도록 합니다.
- 맞춤 패널 가구 옵션으로 맞춤 합판 패널 추가하기바닥에 맞춤 합판 패널을 배치하고, 크기를 조정한 뒤 3D 보기에서 확인하세요.
- Furnish 옵션에서 사용자 지정 가로 또는 세로 패널을 추가하세요로프트와 벽장 사이의 공간 같은 틈을 축 컨트롤로 크기와 위치를 지정한 사용자 지정 추가 패널로 채우세요.
- 디자인 간 재사용을 위해 스윕 프로파일을 생성하고 게시하세요경로를 그리고 단면을 정의한 뒤 다른 디자이너가 드롭다운에서 선택할 수 있도록 게시하면 스윕 도구로 장식 프로파일을 재사용할 수 있습니다.
- Create custom grooves via panel edit panel designDraw a groove shape on a panel, set it as a cutout with depth and material, then repeat it at a fixed distance.
- Furnish > Panels을(를) 통해 사용자 지정 수직 패널을 추가하고 라미네이트 마감을 적용하세요재질과 마감을 선택한 다음 치수를 설정하여 사용자 지정 수직 패널을 만드세요.
- Create a hinge custom scenario between an internal panel and shutterSet the connector source to manual, then create the scenario connector and add the relevant connector card, such as a blind corner connector.
- 캐비닛에서 시작하여 사용자 지정 또는 구획 입면도를 생성하세요특정 캐비닛에서 입면도를 시작하여 사용자 지정 또는 구획 입면도를 생성하세요.
- Add a custom horizontal panel sized from carcass width and thicknessAdd a horizontal custom panel inside a cabinet and size it from the carcass width, depth and panel thickness so it aligns correctly.
- 경사진 상단을 위한 사용자 지정 경사 패널 추가경사진 상단을 위한 사용자 지정 경사 패널을 추가하려면 필요한 경사도를 계산하고 그에 따라 패널 치수를 늘리십시오.
- Choose custom and kitchen filler panel typesLearn which custom panel shapes and kitchen filler panel types you can add to a design.
- Create a custom plan from the three-dot menu next to 3D viewCreate a custom plan in the design portal and understand the cut depth it uses.
- Create and apply custom connector logic for hardware in bulkReplace or add hardware connectors across a design from the Connectors settings in Manufacturing Settings.
- Draw and extrude shapes with the sketch toolsetDraw a shape and extrude it using push, pull, extend, move and follow-me style operations that work like SketchUp.
- 혼합 스케치 선택 항목 편집 및 Offset 모드 재사용선과 원을 함께 선택하고 각 유형의 속성을 해당 패널 섹션에서 변경하세요. Offset 도구는 마지막으로 선택한 Copy 또는 Move 모드를 유지합니다.
- Extrude or cut grooves on a panel via Edit Panel DesignCreate grooves or raised shapes on a panel by adding a shape in Edit Panel Design and applying it.
- Rotate objects from the Sketch tab in the designOpen the Sketch tab in the design and choose Rotate once sketch tools are enabled.
- 타일링 및 절단 도구에서 extrude, cut, front shift 사용하기타일링 및 절단 도구에서 도형을 그린 다음 extrude하거나 벽으로 cut하거나 앞으로 shift하여 디자인을 구성하세요.
- Extrude 대신 Cut을 사용하여 패널에 모양을 잘라 넣기패널 면에 모양을 그리고 Extrude 대신 Cut을 사용하여 필요한 깊이로 컷아웃이나 홈을 만드세요.
- 타일링 및 절단 도구로 벽 타일을 추가하고 12 mm로 돌출합니다직사각형 영역을 그려 12 mm로 돌출하고 벽 타일 재질을 선택하여 벽에 벽 타일을 추가한 다음, 패턴과 타일 크기를 조정합니다.
- Create custom panel designs with extrude, offset move, fillet and cutDraw and shape a custom panel design, round its corners and cut a through opening.
- 경로와 프로파일을 사용한 스윕으로 패턴 트림 만들기트림 윤곽을 경로로 그린 다음, 그 경로를 따라 프로파일 형상을 스윕하여 패턴 트림이나 몰딩을 만듭니다.
- Extrude와 Cut으로 셔터에 트림 및 홈 디자인 만들기그린 영역을 Extrude로 앞으로 당기거나 컷 깊이만큼 함몰시켜 셔터에 트림 및 홈 스타일 디자인을 만듭니다.
- 돌출과 오프셋으로 반자 드롭 만들기돌출 및 반자 만들기 도구를 사용하여 주변부 및 아일랜드 반자를 만듭니다.
- 템플릿, 사용자 지정 템플릿 또는 빈 캔버스에서 프로젝트 시작하기미리 정의된 디자인 유형, 직접 만든 템플릿 또는 빈 캔버스에서 새 프로젝트를 시작하세요.
- Add beams via custom construction with height and depthAdd beams through custom construction with height and depth, while other components such as lofts, wardrobes, cabinets and kitchen elements come directly from the catalog.
- Sweep Tool로 코니스, 몰딩 및 벽 패널을 추가하세요벽에 Sweep Tool을 사용하여 사용자 지정 코니스, 몰딩 및 장식용 벽 패널을 추가하고, 타일 절단의 스윕 모드를 사용하여 벽 몰딩과 셔터 디자인을 만드세요.
- Add free text with custom size and color instead of annotationsSet the size and color of free text before you place it, and give different text different colors.
- Handle resizing, extensions, and why custom sizes reset when switching handlesOverride a placed handle's width, height and depth, add left/right extensions on profile handles, and see why swapping the handle item resets your customizations.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- 프리셋 또는 사용자 지정 값으로 벽 두께 설정카탈로그의 프리셋 옵션에서 벽의 마감 재료 두께를 선택하거나 사용자 지정 값을 직접 입력하세요.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.