தனிப்பயன் வடிவங்கள் மற்றும் திடப்பொருட்கள்
வழிகாட்டிகள்: 37
- தனிப்பயன் தாங்கு பலகங்களைச் சேர்த்து, பின்பலக இடமாற்றம் மற்றும் வரிப்பள்ளம் வெட்டுதலை அமைக்கவும்அதன் சொந்த மையப்பொருள், மேற்பூச்சு மற்றும் லேபிளுடன் ஒரு தாங்கு பலகத்தைச் சேர்த்து, நீட்டிப்பு அளவுருக்களில் பின்பலக இடமாற்றம் மற்றும் வரிப்பள்ளம் வெட்டும் ஆழத்தை அமைக்கவும்.
- தொகுப்பு கிடங்கிலிருந்து ஒரு தனிப்பயன் கட்டுமான அலகை ஒரு வடிவமைப்பில் சேர்க்கவும்ஒரு கிடங்கு தள அலகை உங்கள் தொகுப்புக்குள் கொண்டு வாருங்கள், அது design portal இல் furnish கீழ் தோன்றும்.
- ஒரு பேனலின் மேற்பரப்பு முடிவை நகலெடுக்க தனிப்பயன் முடிவு மற்றும் பொருத்தும் பண்பைப் பயன்படுத்தவும்வெளிப்புற முடிவு மூலத்தால் இயக்கப்படும் ஒரு பேனலுக்கு குறிப்பிட்ட முடிவைப் பயன்படுத்த, பேனலைத் தேர்ந்தெடுத்து, வெளிப்புற முடிவு மூலத்தைத் திறந்து, தனிப்பயன் முடிவைத் தேர்ந்தெடுக்கவும்.
- ஒரு ஸ்வீப் ப்ரொஃபைலை அளவுருவாக்க அடிப்படை வடிவப் பாதையைத் திருத்தவும்ஸ்வீப் அல்லது ரிப்பீட் ப்ரொஃபைலின் தொடக்கப் புள்ளியை அளவுருவாக்கி, வடிவமைப்புடன் ப்ரொஃபைல் புதுப்பிக்கப்படுமாறு செய்யவும்.
- Custom panel furniture விருப்பத்தைப் பயன்படுத்தி தனிப்பயன் ply panel ஒன்றைச் சேர்க்கவும்தனிப்பயன் ply panel ஒன்றைத் தரையில் வைத்து, அளவு செய்து, 3D view-இல் சரிபார்க்கவும்.
- Furnish விருப்பத்திலிருந்து தனிப்பயன் கிடைமட்ட அல்லது செங்குத்து பேனல்களைச் சேர்க்கவும்லாஃப்ட் மற்றும் சுவர் அலகுகளுக்கு இடையிலான இடைவெளி போன்ற இடைவெளிகளை, அச்சுக் கட்டுப்பாடுகளைப் பயன்படுத்தி அளவு நிர்ணயித்து இடம் வைக்கப்பட்ட தனிப்பயன் கூடுதல் பேனல்களால் நிரப்பவும்.
- வடிவமைப்புகளில் மீண்டும் பயன்படுத்துவதற்காக ஸ்வீப் சுயவிவரங்களை உருவாக்கி வெளியிடுங்கள்ஒரு பாதையை வரைந்து, அதன் குறுக்குவெட்டை வரையறுத்து, மற்ற வடிவமைப்பாளர்கள் ஒரு dropdown-இல் இருந்து தேர்ந்தெடுக்கும்படி வெளியிடுவதன் மூலம் ஸ்வீப் கருவியுடன் ஒரு அலங்கார சுயவிவரத்தை மீண்டும் பயன்படுத்துங்கள்.
- பேனல் வடிவமைப்பு திருத்தி மூலம் தனிப்பயன் பள்ளங்களை உருவாக்கவும்ஒரு பேனலில் பள்ள வடிவத்தை வரைந்து, ஆழம் மற்றும் பொருளுடன் அதை வெட்டுப்பகுதியாக அமைத்து, பின்னர் நிலையான இடைவெளியில் அதை மீண்டும் செய்யவும்.
- Furnish > Panels மூலம் தனிப்பயன் செங்குத்துப் பலகத்தைச் சேர்த்து, லேமினேட் ஃபினிஷ்ஷைப் பயன்படுத்தவும்ஒரு தனிப்பயன் செங்குத்துப் பலகத்தை உருவாக்க, அதன் பொருள் மற்றும் ஃபினிஷ்ஷைத் தேர்ந்தெடுத்து, பின்னர் அதன் அளவுகளை அமைக்கவும்.
- Create a hinge custom scenario between an internal panel and shutterSet the connector source to manual, then create the scenario connector and add the relevant connector card, such as a blind corner connector.
- ஒரு கேபினட்டில் இருந்து தனிப்பயன் அல்லது பிரிவு எலிவேஷன்களை உருவாக்கவும்தனிப்பயன் அல்லது பிரிவு எலிவேஷனை உருவாக்க, குறிப்பிட்ட கேபினட்டில் இருந்து எலிவேஷனைத் தொடங்கவும்.
- Add a custom horizontal panel sized from carcass width and thicknessAdd a horizontal custom panel inside a cabinet and size it from the carcass width, depth and panel thickness so it aligns correctly.
- சாய்ந்த மேற்பகுதிக்கு தனிப்பயன் சாய்வுப் பலகத்தைச் சேர்க்கவும்சாய்ந்த மேற்பகுதிக்கு தனிப்பயன் சாய்வுப் பலகத்தைச் சேர்க்க, தேவையான சாய்வைக் கணக்கிட்டு, பலகத்தின் அளவை அதற்கேற்ப அதிகரிக்கவும்.
- Choose custom and kitchen filler panel typesLearn which custom panel shapes and kitchen filler panel types you can add to a design.
- Create a custom plan from the three-dot menu next to 3D viewCreate a custom plan in the design portal and understand the cut depth it uses.
- Create and apply custom connector logic for hardware in bulkReplace or add hardware connectors across a design from the Connectors settings in Manufacturing Settings.
- Draw and extrude shapes with the sketch toolsetDraw a shape and extrude it using push, pull, extend, move and follow-me style operations that work like SketchUp.
- கலப்பு ஸ்கெட்ச் தேர்வுகளைத் திருத்தி Offset பயன்முறையை மீண்டும் பயன்படுத்துங்கள்கோடுகளையும் வட்டங்களையும் ஒன்றாகத் தேர்ந்தெடுத்து, ஒவ்வொரு வகையின் பண்புகளையும் அதன் சொந்த panel பிரிவில் மாற்றுங்கள்; மேலும் Offset கருவி நீங்கள் கடைசியாகத் தேர்ந்தெடுத்த Copy அல்லது Move பயன்முறையைத் தக்கவைத்துக்கொள்ளும் என்பதை அறிந்துகொள்ளுங்கள்.
- Extrude or cut grooves on a panel via Edit Panel DesignCreate grooves or raised shapes on a panel by adding a shape in Edit Panel Design and applying it.
- Rotate objects from the Sketch tab in the designOpen the Sketch tab in the design and choose Rotate once sketch tools are enabled.
- டைலிங் மற்றும் கட்டிங் கருவியில் extrude, cut மற்றும் front shift பயன்படுத்தவும்டைலிங் மற்றும் கட்டிங் கருவியில் ஒரு வடிவத்தை வரைந்து, அதை extrude செய்யவும், சுவரில் cut செய்யவும் அல்லது முன்னோக்கி shift செய்யவும் உங்கள் வடிவமைப்பை உருவாக்கலாம்.
- Extrude-க்கு பதிலாக Cut பயன்படுத்தி பேனலில் வடிவங்களை வெட்டுங்கள்பேனலின் முகப்பில் ஒரு வடிவத்தை வரைந்து, Extrude-க்கு பதிலாக Cut பயன்படுத்தி, தேவையான ஆழத்தில் கட்-அவுட் அல்லது கூவ் செய்யுங்கள்.
- டைலிங் மற்றும் கட்டிங் கருவியைப் பயன்படுத்தி சுவர் ஓடுகளைச் சேர்த்து, 12 mm வரை எக்ஸ்ட்ரூட் செய்யவும்ஒரு செவ்வகப் பகுதியை வரைந்து, அதை 12 mm வரை எக்ஸ்ட்ரூட் செய்து, சுவர் ஓடுப் பொருளைத் தேர்ந்தெடுத்து, பின்னர் வடிவமைப்பையும் ஓடு அளவுகளையும் சரிசெய்வதன் மூலம் சுவரில் சுவர் ஓடுகளைச் சேர்க்கவும்.
- Create custom panel designs with extrude, offset move, fillet and cutDraw and shape a custom panel design, round its corners and cut a through opening.
- பாதை மற்றும் வடிவத்தைக் கொண்டு sweep மூலம் வடிவமைந்த trim உருவாக்கவும்trim-இன் வெளிக்கோட்டை ஒரு பாதையாக வரைந்து, அதன் வழியே ஒரு profile வடிவத்தை sweep செய்து வடிவமைந்த trim அல்லது moulding உருவாக்கவும்.
- Extrude மற்றும் Cut மூலம் shutter-இல் trim மற்றும் groove வடிவமைப்புகளை உருவாக்கவும்வரையப்பட்ட பகுதியை Extrude மூலம் முன்னோக்கி இழுக்கவும், அல்லது cut depth மூலம் உள்ளே அழுத்தவும், shutter-இல் trim மற்றும் groove-பாணி வடிவமைப்புகளை உருவாக்க.
- Create false ceiling drops with extrude and offsetBuild peripheral and island false ceilings using the extrude and create-false-ceiling tools.
- ஒரு டெம்ப்ளேட், தனிப்பயன் டெம்ப்ளேட் அல்லது வெற்று கேன்வாஸிலிருந்து ஒரு திட்டத்தைத் தொடங்குங்கள்முன்வரையறுக்கப்பட்ட வடிவமைப்பு வகை, உங்கள் சொந்த டெம்ப்ளேட் அல்லது வெற்று கேன்வாஸிலிருந்து புதிய திட்டத்தைத் தொடங்குங்கள்.
- Add beams via custom construction with height and depthAdd beams through custom construction with height and depth, while other components such as lofts, wardrobes, cabinets and kitchen elements come directly from the catalog.
- Sweep Tool மூலம் கார்னிஸ்கள், மோல்டிங்குகள் மற்றும் சுவர் பேனலிங்கைச் சேர்க்கவும்தனிப்பயன் கார்னிஸ்கள், மோல்டிங்குகள் மற்றும் அலங்கார சுவர் பேனலிங்கைச் சேர்க்க சுவர்களில் Sweep Tool பயன்படுத்தவும், சுவர் மோல்டிங்குகள் மற்றும் ஷட்டர் வடிவமைப்புகளுக்கு tiling cutting-இல் sweep mode பயன்படுத்தவும்.
- Add free text with custom size and color instead of annotationsSet the size and color of free text before you place it, and give different text different colors.
- Handle resizing, extensions, and why custom sizes reset when switching handlesOverride a placed handle's width, height and depth, add left/right extensions on profile handles, and see why swapping the handle item resets your customizations.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- முன்னமைவுகள் அல்லது தனிப்பயன் மதிப்பிலிருந்து சுவர் தடிமனை அமைக்கவும்முன்னமைவு பட்டியல் விருப்பங்களிலிருந்து சுவரின் முடிக்கப்பட்ட பொருள் தடிமனைத் தேர்ந்தெடுக்கவும் அல்லது உங்கள் சொந்த தனிப்பயன் மதிப்பைத் தட்டச்சு செய்யவும்.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.