କଷ୍ଟମ୍ ଆକୃତି ଏବଂ ସଲିଡ୍
ଗାଇଡ୍: 37
- Add custom support panels and set back panel offset and groovingAdd a support panel with its own core material, finish and label, and configure the back panel offset and grooving depth in the extension parameters.
- କାଟାଲଗ ଗୋଦାମରୁ ଏକ କଷ୍ଟମ ନିର୍ମାଣ ୟୁନିଟ୍ ଏକ ଡିଜାଇନରେ ଯୋଡ଼ନ୍ତୁଏକ ଗୋଦାମ ବେସ ୟୁନିଟ୍ ଆପଣଙ୍କ କାଟାଲଗକୁ ଆଣନ୍ତୁ, ଯାହା design portal ଅଧୀନରେ furnish ତଳେ ଦେଖାଯିବ।
- ଏକ ପ୍ୟାନେଲ ଉପରେ ଫିନିସ କପି କରିବା ପାଇଁ କଷ୍ଟମ ଫିନିସ ଏବଂ ମ୍ୟାଚ ପ୍ରପର୍ଟି ବ୍ୟବହାର କରନ୍ତୁଯେଉଁ ପ୍ୟାନେଲର ବାହ୍ୟ ଫିନିସ ସ୍ରୋତ-ନିୟନ୍ତ୍ରିତ, ସେଥିରେ ଏକ ନିର୍ଦ୍ଦିଷ୍ଟ ଫିନିସ ଲଗାଇବା ପାଇଁ ପ୍ୟାନେଲ ଚୟନ କରନ୍ତୁ, ବାହ୍ୟ ଫିନିସ ସ୍ରୋତ ଖୋଲନ୍ତୁ ଏବଂ କଷ୍ଟମ ଫିନିସ ବାଛନ୍ତୁ।
- ଏକ ସ୍ୱିପ୍ ପ୍ରୋଫାଇଲ୍ ପାରାମିଟରାଇଜ୍ କରିବା ପାଇଁ ଆଧାର ଆକୃତି ପଥ ସମ୍ପାଦନ କରନ୍ତୁସ୍ୱିପ୍ କିମ୍ବା ରିପିଟ୍ ପ୍ରୋଫାଇଲ୍ର ଆରମ୍ଭ ବିନ୍ଦୁକୁ ପାରାମିଟ୍ରିକ୍ କରନ୍ତୁ, ଯାହାଫଳରେ ପ୍ରୋଫାଇଲ୍ ଡିଜାଇନ୍ ସହିତ ଅପଡେଟ୍ ହେବ।
- କଷ୍ଟମ ପ୍ୟାନେଲ ଫର୍ନିଚର ବିକଳ୍ପ ବ୍ୟବହାର କରି ଏକ କଷ୍ଟମ ପ୍ଲାଇ ପ୍ୟାନେଲ ଯୋଡ଼ନ୍ତୁଏକ କଷ୍ଟମ ପ୍ଲାଇ ପ୍ୟାନେଲ ଫ୍ଲୋର ଉପରେ ରଖନ୍ତୁ, ଏହାର ଆକାର ନିର୍ଧାରଣ କରନ୍ତୁ ଏବଂ 3D ଦୃଶ୍ୟରେ ଏହାକୁ ଯାଞ୍ଚ କରନ୍ତୁ।
- furnish ବିକଳ୍ପରୁ କଷ୍ଟମ ଭୂସମାନ୍ତର କିମ୍ବା ଲମ୍ବମାନ ପ୍ୟାନେଲ ଯୋଡ଼ନ୍ତୁଲଫ୍ଟ ଏବଂ ୱାଲ ୟୁନିଟ ମଧ୍ୟରେ ଥିବା ଫାଙ୍କ ପରି ଫାଙ୍କଗୁଡ଼ିକୁ କଷ୍ଟମ ଆଡ-ଅନ ପ୍ୟାନେଲ ସହିତ ପୂରଣ କରନ୍ତୁ, ଯାହାର ମାପ ଏବଂ ସ୍ଥାନ ଆକ୍ସିସ ନିୟନ୍ତ୍ରଣ ବ୍ୟବହାର କରି ନିର୍ଧାରିତ ହୁଏ।
- Create and publish sweep profiles for reuse across designsReuse a decorative profile with the sweep tool by drawing a path, defining its cross-section, and publishing it so other designers can pick it from a dropdown.
- ପ୍ୟାନେଲ ଡିଜାଇନ ପ୍ୟାନେଲ ସମ୍ପାଦନା ମାଧ୍ୟମରେ କଷ୍ଟମ ଗ୍ରୁଭ ତିଆରି କରନ୍ତୁଏକ ପ୍ୟାନେଲ ଉପରେ ଏକ ଗ୍ରୁଭ ଆକୃତି ଆଙ୍କନ କରନ୍ତୁ, ଗଭୀରତା ଓ ସାମଗ୍ରୀ ସହିତ ଏହାକୁ ଏକ କଟଆଉଟ ଭାବରେ ସେଟ କରନ୍ତୁ, ତାପରେ ଏହାକୁ ଏକ ନିର୍ଦ୍ଦିଷ୍ଟ ଦୂରତାରେ ପୁନରାବୃତ୍ତି କରନ୍ତୁ।
- Furnish > Panels ମାଧ୍ୟମରେ ଏକ କଷ୍ଟମ ଭର୍ଟିକାଲ ପ୍ୟାନେଲ ଯୋଡ଼ନ୍ତୁ ଏବଂ ଲାମିନେଟ ଫିନିଶ ଲଗାନ୍ତୁଏହାର ମ୍ୟାଟେରିଆଲ ଏବଂ ଫିନିଶ ବାଛି ଏବଂ ତା’ପରେ ଏହାର ମାପ ନିର୍ଧାରଣ କରି ଏକ କଷ୍ଟମ ଭର୍ଟିକାଲ ପ୍ୟାନେଲ ତିଆରି କରନ୍ତୁ।
- Create a hinge custom scenario between an internal panel and shutterSet the connector source to manual, then create the scenario connector and add the relevant connector card, such as a blind corner connector.
- ଏକ କ୍ୟାବିନେଟ୍ରୁ ଆରମ୍ଭ କରି କଷ୍ଟମ୍ କିମ୍ବା ସେକ୍ସନାଲ୍ ଏଲିଭେସନ୍ ତିଆରି କରନ୍ତୁକଷ୍ଟମ୍ କିମ୍ବା ସେକ୍ସନାଲ୍ ଏଲିଭେସନ୍ ତିଆରି କରିବା ପାଇଁ ଏକ ନିର୍ଦ୍ଦିଷ୍ଟ କ୍ୟାବିନେଟ୍ରୁ ଏଲିଭେସନ୍ ଆରମ୍ଭ କରନ୍ତୁ।
- Add a custom horizontal panel sized from carcass width and thicknessAdd a horizontal custom panel inside a cabinet and size it from the carcass width, depth and panel thickness so it aligns correctly.
- ଏକ ଢାଳୁଆ ଉପର ପାଇଁ ଏକ କଷ୍ଟମ ଇନକ୍ଲାଇନ୍ଡ ପ୍ୟାନେଲ ଯୋଡ଼ନ୍ତୁଏକ ଢାଳୁଆ ଉପର ପାଇଁ ଏକ କଷ୍ଟମ ଇନକ୍ଲାଇନ୍ଡ ପ୍ୟାନେଲ ଯୋଡ଼ିବା ପାଇଁ ଆବଶ୍ୟକ ଇନକ୍ଲାଇନ୍ ଗଣନା କରନ୍ତୁ ଏବଂ ସେହି ଅନୁସାରେ ପ୍ୟାନେଲ ଆକାର ବଢ଼ାନ୍ତୁ।
- Choose custom and kitchen filler panel typesLearn which custom panel shapes and kitchen filler panel types you can add to a design.
- Create a custom plan from the three-dot menu next to 3D viewCreate a custom plan in the design portal and understand the cut depth it uses.
- Create and apply custom connector logic for hardware in bulkReplace or add hardware connectors across a design from the Connectors settings in Manufacturing Settings.
- Draw and extrude shapes with the sketch toolsetDraw a shape and extrude it using push, pull, extend, move and follow-me style operations that work like SketchUp.
- ମିଶ୍ରିତ ସ୍କେଚ୍ ଚୟନଗୁଡ଼ିକୁ ସମ୍ପାଦନ କରନ୍ତୁ ଏବଂ Offset ମୋଡ୍ ପୁନଃବ୍ୟବହାର କରନ୍ତୁରେଖା ଏବଂ ବୃତ୍ତଗୁଡ଼ିକୁ ଏକସଙ୍ଗେ ଚୟନ କରନ୍ତୁ ଏବଂ ପ୍ରତ୍ୟେକ ପ୍ରକାରର ଗୁଣଧର୍ମକୁ ନିଜର ପ୍ୟାନେଲ ବିଭାଗରେ ପରିବର୍ତ୍ତନ କରନ୍ତୁ, ଏବଂ ଜାଣନ୍ତୁ ଯେ Offset ଉପକରଣ ଆପଣ ଶେଷ ଥର ବାଛିଥିବା Copy କିମ୍ବା Move ମୋଡ୍ ରଖେ।
- Extrude or cut grooves on a panel via Edit Panel DesignCreate grooves or raised shapes on a panel by adding a shape in Edit Panel Design and applying it.
- Rotate objects from the Sketch tab in the designOpen the Sketch tab in the design and choose Rotate once sketch tools are enabled.
- ଟାଇଲିଂ ଏବଂ କଟିଂ ଟୁଲରେ extrude, cut ଏବଂ front shift ବ୍ୟବହାର କରନ୍ତୁଟାଇଲିଂ ଏବଂ କଟିଂ ଟୁଲରେ ଏକ ଆକୃତି ଆଙ୍କନ୍ତୁ, ତାପରେ ଏହାକୁ extrude କରନ୍ତୁ, କାନ୍ଥରେ cut କରନ୍ତୁ କିମ୍ବା ଆପଣଙ୍କ ଡିଜାଇନ୍ ତିଆରି କରିବାକୁ ଏହାକୁ ଆଗକୁ shift କରନ୍ତୁ।
- Extrude ବଦଳରେ Cut ବ୍ୟବହାର କରି ପ୍ୟାନେଲରେ ଆକୃତି କାଟନ୍ତୁପ୍ୟାନେଲ ପୃଷ୍ଠରେ ଏକ ଆକୃତି ଆଙ୍କନ୍ତୁ ଏବଂ ଆବଶ୍ୟକ ଗଭୀରତାରେ କଟ୍-ଆଉଟ୍ କିମ୍ବା ଖାଲ ତିଆରି କରିବା ପାଇଁ Extrude ବଦଳରେ Cut ବ୍ୟବହାର କରନ୍ତୁ।
- ଟାଇଲିଂ ଏବଂ କଟିଂ ଉପକରଣ ସହିତ ୱାଲ୍ ଟାଇଲ୍ ଯୋଡ଼ନ୍ତୁ, ୧୨ mm ଏକ୍ସଟ୍ରୁଡ୍ କରନ୍ତୁଏକ ଆୟତାକାର କ୍ଷେତ୍ର ଚିତ୍ରଣ କରି, ଏହାକୁ ୧୨ mm କୁ ଏକ୍ସଟ୍ରୁଡ୍ କରି ଏବଂ ଏକ ୱାଲ୍ ଟାଇଲ୍ ମେଟେରିଆଲ୍ ବାଛି ଏକ ୱାଲ୍ରେ ୱାଲ୍ ଟାଇଲ୍ ଯୋଡ଼ନ୍ତୁ, ତାପରେ ପ୍ୟାଟର୍ଣ୍ଣ ଏବଂ ଟାଇଲ୍ ଆକାର ସମାୟୋଜନ କରନ୍ତୁ।
- Create custom panel designs with extrude, offset move, fillet and cutDraw and shape a custom panel design, round its corners and cut a through opening.
- ପଥ ଏବଂ ପ୍ରୋଫାଇଲ ସହିତ ସ୍ୱିପ ବ୍ୟବହାର କରି ପ୍ୟାଟର୍ନଯୁକ୍ତ ଟ୍ରିମ ତିଆରି କରନ୍ତୁଟ୍ରିମର ଆଉଟଲାଇନକୁ ଏକ ପଥ ଭାବରେ ଆଙ୍କନ୍ତୁ, ତାପରେ ପ୍ୟାଟର୍ନଯୁକ୍ତ ଟ୍ରିମ କିମ୍ବା ମୋଲ୍ଡିଂ ତିଆରି କରିବା ପାଇଁ ସେହି ପଥ ସହିତ ଏକ ପ୍ରୋଫାଇଲ ଆକୃତିକୁ ସ୍ୱିପ କରନ୍ତୁ।
- Extrude ଏବଂ Cut ସହିତ ଏକ ଶଟର ଉପରେ ଟ୍ରିମ ଏବଂ ଗ୍ରୁଭ ଡିଜାଇନ ତିଆରି କରନ୍ତୁଏକ ଶଟର ଉପରେ ଟ୍ରିମ ଏବଂ ଗ୍ରୁଭ-ଶୈଳୀର ଡିଜାଇନ ତିଆରି କରିବା ପାଇଁ ଏକ ଅଙ୍କିତ ଅଞ୍ଚଳକୁ Extrude ସହିତ ଆଗକୁ ଟାଣନ୍ତୁ କିମ୍ବା ଏକ କଟ ଗଭୀରତା ଦ୍ୱାରା ତାହାକୁ ଭିତରକୁ ଦବାନ୍ତୁ।
- ଏକ୍ସଟ୍ରୁଡ୍ ଏବଂ ଅଫସେଟ୍ ସହିତ ଫଲ୍ସ ସିଲିଂ ଡ୍ରପ୍ ସୃଷ୍ଟି କରନ୍ତୁଏକ୍ସଟ୍ରୁଡ୍ ଏବଂ ଫଲ୍ସ ସିଲିଂ ସୃଷ୍ଟି କରିବା ଉପକରଣ ବ୍ୟବହାର କରି ପେରିଫେରାଲ୍ ଏବଂ ଆଇଲ୍ୟାଣ୍ଡ ଫଲ୍ସ ସିଲିଂ ନିର୍ମାଣ କରନ୍ତୁ।
- ଏକ ଟେମ୍ପଲେଟ୍, କଷ୍ଟମ ଟେମ୍ପଲେଟ୍ କିମ୍ବା ଖାଲି କ୍ୟାନଭାସ୍ରୁ ଏକ ପ୍ରୋଜେକ୍ଟ ଆରମ୍ଭ କରନ୍ତୁଏକ ପୂର୍ବ-ନିର୍ଧାରିତ ଡିଜାଇନ୍ ପ୍ରକାର, ଆପଣଙ୍କର ନିଜସ୍ୱ ଟେମ୍ପଲେଟ୍ କିମ୍ବା ଏକ ଖାଲି କ୍ୟାନଭାସ୍ରୁ ଏକ ନୂଆ ପ୍ରୋଜେକ୍ଟ ଆରମ୍ଭ କରନ୍ତୁ।
- Add beams via custom construction with height and depthAdd beams through custom construction with height and depth, while other components such as lofts, wardrobes, cabinets and kitchen elements come directly from the catalog.
- Sweep Tool ସହିତ କର୍ନିସ୍, ମୋଲ୍ଡିଂ ଏବଂ ୱାଲ୍ ପ୍ୟାନେଲିଂ ଯୋଡ଼ନ୍ତୁକଷ୍ଟମ କର୍ନିସ୍, ମୋଲ୍ଡିଂ ଏବଂ ସାଜସଜ୍ଜା ୱାଲ୍ ପ୍ୟାନେଲିଂ ଯୋଡ଼ିବା ପାଇଁ କାନ୍ଥରେ Sweep Tool ବ୍ୟବହାର କରନ୍ତୁ, ଏବଂ ୱାଲ୍ ମୋଲ୍ଡିଂ ଓ ଶଟର ଡିଜାଇନ୍ ପାଇଁ ଟାଇଲିଂ କଟିଂରେ sweep mode ବ୍ୟବହାର କରନ୍ତୁ।
- Add free text with custom size and color instead of annotationsSet the size and color of free text before you place it, and give different text different colors.
- Handle resizing, extensions, and why custom sizes reset when switching handlesOverride a placed handle's width, height and depth, add left/right extensions on profile handles, and see why swapping the handle item resets your customizations.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- ପ୍ରିସେଟ୍ କିମ୍ବା ଏକ କଷ୍ଟମ୍ ମୂଲ୍ୟରୁ କାନ୍ଥ ମୋଟେଇ ସେଟ୍ କରନ୍ତୁପ୍ରିସେଟ୍ କାଟାଲଗ୍ ବିକଳ୍ପଗୁଡ଼ିକରୁ ଏକ କାନ୍ଥର ସମାପ୍ତ ସାମଗ୍ରୀ ମୋଟେଇ ବାଛନ୍ତୁ କିମ୍ବା ନିଜର କଷ୍ଟମ୍ ମୂଲ୍ୟ ଟାଇପ୍ କରନ୍ତୁ।
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.