Custom shapes and solids
Guides: 37
- Add custom support panels and set back panel offset and groovingAdd a support panel with its own core material, finish and label, and configure the back panel offset and grooving depth in the extension parameters.
- Add a custom construction unit from the catalogue warehouse to a designBring a warehouse base unit into your catalogue so it appears under furnish in the design portal.
- Use custom finish and match property to copy a finish onto a panelApply a specific finish to a panel whose external finish is source-driven by selecting the panel, opening external finish source and choosing custom finish.
- Edit base shape path to parameterize a sweep profileMake a sweep or repeat profile's start point parametric so the profile updates with the design.
- Add a custom ply panel using custom panel furniture optionPlace a custom ply panel on the floor, size it, and check it in 3D view.
- Add custom horizontal or vertical panels from the furnish optionFill gaps such as the space between loft and wall units with custom add-on panels sized and placed using the axis controls.
- Create and publish sweep profiles for reuse across designsReuse a decorative profile with the sweep tool by drawing a path, defining its cross-section, and publishing it so other designers can pick it from a dropdown.
- Create custom grooves via panel edit panel designDraw a groove shape on a panel, set it as a cutout with depth and material, then repeat it at a fixed distance.
- Add a custom vertical panel via Furnish > Panels and apply a laminate finishCreate a custom vertical panel by choosing its material and finish, then setting its dimensions.
- Create a hinge custom scenario between an internal panel and shutterSet the connector source to manual, then create the scenario connector and add the relevant connector card, such as a blind corner connector.
- Create custom or sectional elevations starting from a cabinetStart an elevation from a specific cabinet to create a custom or sectional elevation.
- Add a custom horizontal panel sized from carcass width and thicknessAdd a horizontal custom panel inside a cabinet and size it from the carcass width, depth and panel thickness so it aligns correctly.
- Add a custom inclined panel for a slanted topCalculate the required incline and increase the panel dimension accordingly to add a custom inclined panel for a slanted top.
- Choose custom and kitchen filler panel typesLearn which custom panel shapes and kitchen filler panel types you can add to a design.
- Create a custom plan from the three-dot menu next to 3D viewCreate a custom plan in the design portal and understand the cut depth it uses.
- Create and apply custom connector logic for hardware in bulkReplace or add hardware connectors across a design from the Connectors settings in Manufacturing Settings.
- Draw and extrude shapes with the sketch toolsetDraw a shape and extrude it using push, pull, extend, move and follow-me style operations that work like SketchUp.
- Edit mixed sketch selections and reuse the Offset modeSelect lines and circles together and change each type's properties in its own panel section, and know that the Offset tool keeps the Copy or Move mode you last chose.
- Extrude or cut grooves on a panel via Edit Panel DesignCreate grooves or raised shapes on a panel by adding a shape in Edit Panel Design and applying it.
- Rotate objects from the Sketch tab in the designOpen the Sketch tab in the design and choose Rotate once sketch tools are enabled.
- Use extrude, cut and front shift in the tiling and cutting toolDraw a shape in the tiling and cutting tool, then extrude it, cut it into the wall or shift it forward to build your design.
- Cut shapes into a panel using Cut instead of ExtrudeDraw a shape on a panel face and use Cut instead of Extrude to make a cut-out or groove at the depth you need.
- Add wall tiles with tiling and cutting tool, extrude 12 mmAdd wall tiles to a wall by drawing a rectangular area, extruding it to 12 mm and choosing a wall tile material, then adjust the pattern and tile sizes.
- Create custom panel designs with extrude, offset move, fillet and cutDraw and shape a custom panel design, round its corners and cut a through opening.
- Create patterned trim using sweep with a path and profileDraw the trim outline as a path, then sweep a profile shape along it to create patterned trim or moulding.
- Create trim and groove designs on a shutter with Extrude and CutPull a drawn region forward with Extrude or recess it by a cut depth to build trim and groove-style designs on a shutter.
- Create false ceiling drops with extrude and offsetBuild peripheral and island false ceilings using the extrude and create-false-ceiling tools.
- Start a project from a template, custom template or blank canvasBegin a new project from a pre-defined design type, your own template or a blank canvas.
- Add beams via custom construction with height and depthAdd beams through custom construction with height and depth, while other components such as lofts, wardrobes, cabinets and kitchen elements come directly from the catalog.
- Add cornices, mouldings and wall panelling with Sweep ToolUse the Sweep Tool on walls to add custom cornices, mouldings and decorative wall panelling, and use sweep mode in tiling cutting for wall mouldings and shutter designs.
- Add free text with custom size and color instead of annotationsSet the size and color of free text before you place it, and give different text different colors.
- Handle resizing, extensions, and why custom sizes reset when switching handlesOverride a placed handle's width, height and depth, add left/right extensions on profile handles, and see why swapping the handle item resets your customizations.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- Set wall thickness from presets or a custom valueChoose a wall's finished material thickness from the preset catalogue options or type your own custom value.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.