કસ્ટમ આકાર અને સોલિડ
માર્ગદર્શિકાઓ: 37
- કસ્ટમ સપોર્ટ પેનલ ઉમેરો અને બેક પેનલ ઑફસેટ તથા ગ્રૂવિંગ સેટ કરોપોતાના કોર મટીરિયલ, ફિનિશ અને લેબલ સાથે સપોર્ટ પેનલ ઉમેરો, અને એક્સ્ટેન્શન પેરામીટર્સમાં બેક પેનલ ઑફસેટ અને ગ્રૂવિંગ ડેપ્થ ગોઠવો.
- Add a custom construction unit from the catalogue warehouse to a designBring a warehouse base unit into your catalogue so it appears under furnish in the design portal.
- કસ્ટમ ફિનિશ અને મેચ પ્રોપર્ટીનો ઉપયોગ પેનલ પર ફિનિશ કોપી કરવા માટે કરોજેની એક્સટર્નલ ફિનિશ સોર્સ-ડ્રાઇવન છે એવી પેનલ પર ચોક્કસ ફિનિશ લગાવવા માટે પેનલ પસંદ કરો, એક્સટર્નલ ફિનિશ સોર્સ ખોલો અને કસ્ટમ ફિનિશ પસંદ કરો.
- સ્વીપ પ્રોફાઇલને પેરામીટરાઇઝ કરવા માટે બેઝ શેપ પાથ સંપાદિત કરોસ્વીપ અથવા રિપીટ પ્રોફાઇલના શરૂઆતના બિંદુને પેરામેટ્રિક બનાવો જેથી પ્રોફાઇલ ડિઝાઇન સાથે અપડેટ થાય.
- કસ્ટમ પેનલ ફર્નિચર વિકલ્પનો ઉપયોગ કરીને કસ્ટમ પ્લાય પેનલ ઉમેરોફ્લોર પર કસ્ટમ પ્લાય પેનલ મૂકો, તેનું માપ સેટ કરો અને 3D વ્યૂમાં તેને ચકાસો.
- ફર્નિશ વિકલ્પમાંથી કસ્ટમ આડી અથવા ઊભી પેનલ ઉમેરોલોફ્ટ અને વોલ યુનિટ વચ્ચેની જગ્યા જેવી ખાલી જગ્યાઓને એક્સિસ કંટ્રોલથી માપ અને સ્થાન આપીને કસ્ટમ એડ-ઓન પેનલથી ભરો.
- ડિઝાઇનમાં ફરી વાપરવા માટે સ્વીપ પ્રોફાઇલ બનાવો અને પ્રકાશિત કરોપાથ દોરીને, તેનો ક્રોસ-સેક્શન વ્યાખ્યાયિત કરીને અને તેને પ્રકાશિત કરીને સ્વીપ ટૂલ વડે સુશોભન પ્રોફાઇલનો ફરી ઉપયોગ કરો, જેથી અન્ય ડિઝાઇનરો તેને ડ્રોપડાઉનમાંથી પસંદ કરી શકે.
- પેનલ ડિઝાઇનમાં પેનલ એડિટ દ્વારા કસ્ટમ ગ્રૂવ બનાવોપેનલ પર ગ્રૂવનો આકાર દોરો, તેને ઊંડાઈ અને મટીરિયલ સાથે કટઆઉટ તરીકે સેટ કરો, પછી તેને નિશ્ચિત અંતરે પુનરાવર્તિત કરો.
- Furnish > Panels દ્વારા કસ્ટમ વર્ટિકલ પેનલ ઉમેરો અને લેમિનેટ ફિનિશ લગાવોતેની સામગ્રી અને ફિનિશ પસંદ કરીને, પછી તેના પરિમાણો સેટ કરીને કસ્ટમ વર્ટિકલ પેનલ બનાવો.
- આંતરિક પેનલ અને શટર વચ્ચે હિન્જ કસ્ટમ સિનેરિયો બનાવોકનેક્ટર સ્રોતને મેન્યુઅલ પર સેટ કરો, પછી સિનેરિયો કનેક્ટર બનાવો અને સંબંધિત કનેક્ટર કાર્ડ ઉમેરો, જેમ કે બ્લાઇન્ડ કોર્નર કનેક્ટર.
- કેબિનેટથી શરૂ કરીને કસ્ટમ અથવા સેક્શનલ એલિવેશન બનાવોકસ્ટમ અથવા સેક્શનલ એલિવેશન બનાવવા માટે ચોક્કસ કેબિનેટથી એલિવેશન શરૂ કરો.
- Add a custom horizontal panel sized from carcass width and thicknessAdd a horizontal custom panel inside a cabinet and size it from the carcass width, depth and panel thickness so it aligns correctly.
- ઢળતી ટોચ માટે કસ્ટમ ઢળતી પેનલ ઉમેરોઢળતી ટોચ માટે કસ્ટમ ઢળતી પેનલ ઉમેરવા માટે જરૂરી ઢાળની ગણતરી કરો અને તે મુજબ પેનલનું પરિમાણ વધારો.
- Choose custom and kitchen filler panel typesLearn which custom panel shapes and kitchen filler panel types you can add to a design.
- Create a custom plan from the three-dot menu next to 3D viewCreate a custom plan in the design portal and understand the cut depth it uses.
- Create and apply custom connector logic for hardware in bulkReplace or add hardware connectors across a design from the Connectors settings in Manufacturing Settings.
- Draw and extrude shapes with the sketch toolsetDraw a shape and extrude it using push, pull, extend, move and follow-me style operations that work like SketchUp.
- મિક્સ્ડ સ્કેચ સિલેક્શન્સ સંપાદિત કરો અને Offset મોડ ફરી વાપરોરેખાઓ અને વર્તુળોને સાથે પસંદ કરો અને દરેક પ્રકારના ગુણધર્મોને તેના પોતાના પેનલ વિભાગમાં બદલો, અને જાણો કે Offset સાધન તમે છેલ્લે પસંદ કરેલ Copy અથવા Move મોડ રાખે છે.
- Extrude or cut grooves on a panel via Edit Panel DesignCreate grooves or raised shapes on a panel by adding a shape in Edit Panel Design and applying it.
- Rotate objects from the Sketch tab in the designOpen the Sketch tab in the design and choose Rotate once sketch tools are enabled.
- ટાઇલિંગ અને કટિંગ ટૂલમાં extrude, cut અને front shift નો ઉપયોગ કરોટાઇલિંગ અને કટિંગ ટૂલમાં આકાર દોરો, પછી તેને extrude કરો, દીવાલમાં cut કરો અથવા તેને front shift કરો, જેથી તમારી ડિઝાઇન બનાવી શકાય.
- Extrude ને બદલે Cut વાપરીને પેનલમાં આકાર કાપોપેનલના ફેસ પર આકાર દોરો અને જરૂરી ઊંડાઈએ કટ-આઉટ કે ગ્રૂવ બનાવવા માટે Extrude ને બદલે Cut વાપરો.
- ટાઇલિંગ અને કટિંગ ટૂલ વડે વોલ ટાઇલ્સ ઉમેરો, 12 mm સુધી એક્સ્ટ્રુડ કરોલંબચોરસ વિસ્તાર દોરીને, તેને 12 mm સુધી એક્સ્ટ્રુડ કરીને અને વોલ ટાઇલ મટીરિયલ પસંદ કરીને દીવાલ પર વોલ ટાઇલ્સ ઉમેરો, પછી પેટર્ન અને ટાઇલના કદ સમાવો.
- એક્સ્ટ્રુડ, ઓફસેટ મૂવ, ફિલેટ અને કટ વડે કસ્ટમ પેનલ ડિઝાઇન બનાવોકસ્ટમ પેનલ ડિઝાઇન દોરો અને આકાર આપો, તેના ખૂણા ગોળ કરો અને આરપાર જતું છિદ્ર કાપો.
- પાથ અને પ્રોફાઇલ સાથે sweep વાપરીને પેટર્નવાળી ટ્રિમ બનાવોટ્રિમની રૂપરેખા પાથ તરીકે દોરો, પછી પેટર્નવાળી ટ્રિમ કે મોલ્ડિંગ બનાવવા માટે તેની સાથે પ્રોફાઇલ આકાર sweep કરો.
- Extrude અને Cut વડે શટર પર ટ્રિમ અને ગ્રૂવ ડિઝાઇન બનાવોશટર પર ટ્રિમ અને ગ્રૂવ-શૈલીની ડિઝાઇન બનાવવા માટે દોરેલા પ્રદેશને Extrude વડે આગળ ખેંચો અથવા કટ ડેપ્થ વડે અંદર દબાવો.
- એક્સ્ટ્રુડ અને ઓફસેટ વડે ખોટી ટોચમર્યાદાના ડ્રોપ બનાવોએક્સ્ટ્રુડ અને ખોટી ટોચમર્યાદા બનાવવાના સાધનો વડે પેરિફેરલ અને આઇલેન્ડ ખોટી ટોચમર્યાદા બનાવો.
- ટેમ્પલેટ, કસ્ટમ ટેમ્પલેટ અથવા ખાલી કેનવાસમાંથી પ્રોજેક્ટ શરૂ કરોપૂર્વનિર્ધારિત ડિઝાઇન પ્રકાર, તમારી પોતાની ટેમ્પલેટ અથવા ખાલી કેનવાસમાંથી નવો પ્રોજેક્ટ શરૂ કરો.
- Add beams via custom construction with height and depthAdd beams through custom construction with height and depth, while other components such as lofts, wardrobes, cabinets and kitchen elements come directly from the catalog.
- Sweep Tool વડે કોર્નિસ, મોલ્ડિંગ અને વોલ પેનલિંગ ઉમેરોકસ્ટમ કોર્નિસ, મોલ્ડિંગ અને સુશોભન વોલ પેનલિંગ ઉમેરવા માટે દીવાલો પર Sweep Tool વાપરો, અને વોલ મોલ્ડિંગ અને શટર ડિઝાઇન માટે ટાઇલિંગ કટિંગમાં sweep મોડ વાપરો.
- Add free text with custom size and color instead of annotationsSet the size and color of free text before you place it, and give different text different colors.
- Handle resizing, extensions, and why custom sizes reset when switching handlesOverride a placed handle's width, height and depth, add left/right extensions on profile handles, and see why swapping the handle item resets your customizations.
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- પ્રીસેટ અથવા કસ્ટમ મૂલ્યમાંથી દીવાલની જાડાઈ સેટ કરોપ્રીસેટ કેટલોગ વિકલ્પોમાંથી દીવાલની ફિનિશ્ડ મટીરિયલ જાડાઈ પસંદ કરો અથવા તમારું પોતાનું કસ્ટમ મૂલ્ય લખો.
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.