ਕਸਟਮ ਸ਼ੇਪ ਅਤੇ ਸਾਲਿਡ
ਗਾਈਡਾਂ: 37
- Add custom support panels and set back panel offset and groovingAdd a support panel with its own core material, finish and label, and configure the back panel offset and grooving depth in the extension parameters.
- Add a custom construction unit from the catalogue warehouse to a designBring a warehouse base unit into your catalogue so it appears under furnish in the design portal.
- ਪੈਨਲ ਉੱਤੇ ਫਿਨਿਸ਼ ਕਾਪੀ ਕਰਨ ਲਈ ਕਸਟਮ ਫਿਨਿਸ਼ ਅਤੇ ਮੈਚ ਪ੍ਰਾਪਰਟੀ ਵਰਤੋਜਿਸ ਪੈਨਲ ਦੀ ਬਾਹਰੀ ਫਿਨਿਸ਼ ਸੋਰਸ-ਡ੍ਰਾਈਵਨ ਹੈ, ਉਸ ਉੱਤੇ ਖਾਸ ਫਿਨਿਸ਼ ਲਾਉਣ ਲਈ ਪੈਨਲ ਚੁਣੋ, ਬਾਹਰੀ ਫਿਨਿਸ਼ ਸੋਰਸ ਖੋਲ੍ਹੋ ਅਤੇ ਕਸਟਮ ਫਿਨਿਸ਼ ਚੁਣੋ।
- ਸਵੀਪ ਪ੍ਰੋਫਾਈਲ ਨੂੰ ਪੈਰਾਮੀਟਰਾਈਜ਼ ਕਰਨ ਲਈ ਬੇਸ ਸ਼ੇਪ ਦਾ ਪਾਥ ਸੋਧੋਸਵੀਪ ਜਾਂ ਰੀਪੀਟ ਪ੍ਰੋਫਾਈਲ ਦੇ ਸ਼ੁਰੂਆਤੀ ਬਿੰਦੂ ਨੂੰ ਪੈਰਾਮੀਟ੍ਰਿਕ ਬਣਾਓ ਤਾਂ ਜੋ ਪ੍ਰੋਫਾਈਲ ਡਿਜ਼ਾਈਨ ਨਾਲ ਅੱਪਡੇਟ ਹੋਵੇ।
- ਕਸਟਮ ਪੈਨਲ ਫਰਨੀਚਰ ਵਿਕਲਪ ਦੀ ਵਰਤੋਂ ਕਰਕੇ ਕਸਟਮ ਪਲਾਈ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋਫਰਸ਼ 'ਤੇ ਕਸਟਮ ਪਲਾਈ ਪੈਨਲ ਰੱਖੋ, ਇਸਦਾ ਆਕਾਰ ਸੈੱਟ ਕਰੋ, ਅਤੇ 3D ਵਿਊ ਵਿੱਚ ਇਸਨੂੰ ਜਾਂਚੋ।
- furnish ਵਿਕਲਪ ਤੋਂ ਕਸਟਮ ਖਿਤਿਜੀ ਜਾਂ ਲੰਬਕਾਰੀ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋਲੌਫਟ ਅਤੇ ਵਾਲ ਯੂਨਿਟਾਂ ਵਿਚਕਾਰਲੀ ਥਾਂ ਵਰਗੇ ਖਾਲੀ ਸਥਾਨਾਂ ਨੂੰ ਕਸਟਮ ਐਡ-ਆਨ ਪੈਨਲਾਂ ਨਾਲ ਭਰੋ, ਜਿਨ੍ਹਾਂ ਦਾ ਆਕਾਰ ਅਤੇ ਸਥਿਤੀ ਐਕਸਿਸ ਕੰਟਰੋਲਾਂ ਨਾਲ ਤੈਅ ਕੀਤੀ ਜਾਂਦੀ ਹੈ।
- ਡਿਜ਼ਾਈਨਾਂ ਵਿੱਚ ਦੁਬਾਰਾ ਵਰਤੋਂ ਲਈ ਸਵੀਪ ਪ੍ਰੋਫਾਈਲ ਬਣਾਓ ਅਤੇ ਪ੍ਰਕਾਸ਼ਿਤ ਕਰੋਸਵੀਪ ਟੂਲ ਨਾਲ ਸਜਾਵਟੀ ਪ੍ਰੋਫਾਈਲ ਦੀ ਦੁਬਾਰਾ ਵਰਤੋਂ ਕਰੋ: ਇੱਕ ਪਾਥ ਖਿੱਚੋ, ਇਸਦਾ ਕਰਾਸ-ਸੈਕਸ਼ਨ ਪਰਿਭਾਸ਼ਿਤ ਕਰੋ, ਅਤੇ ਇਸਨੂੰ ਪ੍ਰਕਾਸ਼ਿਤ ਕਰੋ ਤਾਂ ਜੋ ਹੋਰ ਡਿਜ਼ਾਈਨਰ ਇਸਨੂੰ ਡ੍ਰੌਪਡਾਊਨ ਵਿੱਚੋਂ ਚੁਣ ਸਕਣ।
- ਪੈਨਲ ਐਡਿਟ ਪੈਨਲ ਡਿਜ਼ਾਈਨ ਰਾਹੀਂ ਕਸਟਮ ਗਰੂਵ ਬਣਾਓਪੈਨਲ ਉੱਤੇ ਗਰੂਵ ਦੀ ਸ਼ਕਲ ਬਣਾਓ, ਇਸਨੂੰ ਡੂੰਘਾਈ ਅਤੇ ਸਮੱਗਰੀ ਸਮੇਤ ਕਟਾਈ ਵਜੋਂ ਸੈੱਟ ਕਰੋ, ਫਿਰ ਇਸਨੂੰ ਨਿਸ਼ਚਿਤ ਦੂਰੀ ਉੱਤੇ ਦੁਹਰਾਓ।
- Furnish > Panels ਰਾਹੀਂ ਕਸਟਮ ਲੰਬਕਾਰੀ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋ ਅਤੇ ਲੈਮੀਨੇਟ ਫਿਨਿਸ਼ ਲਗਾਓਇਸ ਦਾ ਮੈਟੀਰੀਅਲ ਅਤੇ ਫਿਨਿਸ਼ ਚੁਣ ਕੇ, ਫਿਰ ਇਸ ਦੇ ਮਾਪ ਸੈੱਟ ਕਰਕੇ ਇੱਕ ਕਸਟਮ ਲੰਬਕਾਰੀ ਪੈਨਲ ਬਣਾਓ।
- ਅੰਦਰੂਨੀ ਪੈਨਲ ਅਤੇ ਸ਼ਟਰ ਵਿਚਕਾਰ ਇੱਕ ਹਿੰਜ ਕਸਟਮ ਸਿਨਾਰੀਓ ਬਣਾਓਕਨੈਕਟਰ ਸਰੋਤ ਨੂੰ ਮੈਨੁਅਲ 'ਤੇ ਸੈੱਟ ਕਰੋ, ਫਿਰ ਸਿਨਾਰੀਓ ਕਨੈਕਟਰ ਬਣਾਓ ਅਤੇ ਸੰਬੰਧਿਤ ਕਨੈਕਟਰ ਕਾਰਡ ਸ਼ਾਮਲ ਕਰੋ, ਜਿਵੇਂ ਕਿ ਬਲਾਇੰਡ ਕਾਰਨਰ ਕਨੈਕਟਰ।
- ਕੈਬਿਨੈੱਟ ਤੋਂ ਕਸਟਮ ਜਾਂ ਸੈਕਸ਼ਨਲ ਐਲੀਵੇਸ਼ਨ ਬਣਾਓਕਸਟਮ ਜਾਂ ਸੈਕਸ਼ਨਲ ਐਲੀਵੇਸ਼ਨ ਬਣਾਉਣ ਲਈ ਕਿਸੇ ਖਾਸ ਕੈਬਿਨੈੱਟ ਤੋਂ ਐਲੀਵੇਸ਼ਨ ਸ਼ੁਰੂ ਕਰੋ।
- Add a custom horizontal panel sized from carcass width and thicknessAdd a horizontal custom panel inside a cabinet and size it from the carcass width, depth and panel thickness so it aligns correctly.
- ਤਿਰਛੇ ਉੱਪਰ ਵਾਲੇ ਹਿੱਸੇ ਲਈ ਕਸਟਮ ਝੁਕਾਅ ਵਾਲਾ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰੋਤਿਰਛੇ ਉੱਪਰ ਵਾਲੇ ਹਿੱਸੇ ਲਈ ਕਸਟਮ ਝੁਕਾਅ ਵਾਲਾ ਪੈਨਲ ਸ਼ਾਮਲ ਕਰਨ ਲਈ ਲੋੜੀਂਦਾ ਝੁਕਾਅ ਗਿਣੋ ਅਤੇ ਪੈਨਲ ਦਾ ਆਕਾਰ ਉਸ ਅਨੁਸਾਰ ਵਧਾਓ।
- Choose custom and kitchen filler panel typesLearn which custom panel shapes and kitchen filler panel types you can add to a design.
- Create a custom plan from the three-dot menu next to 3D viewCreate a custom plan in the design portal and understand the cut depth it uses.
- Create and apply custom connector logic for hardware in bulkReplace or add hardware connectors across a design from the Connectors settings in Manufacturing Settings.
- Draw and extrude shapes with the sketch toolsetDraw a shape and extrude it using push, pull, extend, move and follow-me style operations that work like SketchUp.
- ਮਿਕਸਡ ਸਕੈਚ ਚੋਣਾਂ ਨੂੰ ਸੰਪਾਦਿਤ ਕਰੋ ਅਤੇ Offset ਮੋਡ ਨੂੰ ਦੁਬਾਰਾ ਵਰਤੋਲਾਈਨਾਂ ਅਤੇ ਚੱਕਰ ਇਕੱਠੇ ਚੁਣੋ ਅਤੇ ਹਰ ਕਿਸਮ ਦੀਆਂ ਵਿਸ਼ੇਸ਼ਤਾਵਾਂ ਨੂੰ ਉਸਦੇ ਆਪਣੇ ਪੈਨਲ ਭਾਗ ਵਿੱਚ ਬਦਲੋ, ਅਤੇ ਜਾਣੋ ਕਿ Offset ਟੂਲ ਉਹੀ Copy ਜਾਂ Move ਮੋਡ ਰੱਖਦਾ ਹੈ ਜੋ ਤੁਸੀਂ ਆਖਰੀ ਵਾਰ ਚੁਣਿਆ ਸੀ।
- Extrude or cut grooves on a panel via Edit Panel DesignCreate grooves or raised shapes on a panel by adding a shape in Edit Panel Design and applying it.
- Rotate objects from the Sketch tab in the designOpen the Sketch tab in the design and choose Rotate once sketch tools are enabled.
- ਟਾਈਲਿੰਗ ਅਤੇ ਕੱਟਣ ਵਾਲੇ ਟੂਲ ਵਿੱਚ extrude, cut ਅਤੇ front shift ਵਰਤੋਟਾਈਲਿੰਗ ਅਤੇ ਕੱਟਣ ਵਾਲੇ ਟੂਲ ਵਿੱਚ ਇੱਕ ਆਕਾਰ ਬਣਾਓ, ਫਿਰ ਇਸਨੂੰ extrude ਕਰੋ, ਕੰਧ ਵਿੱਚ cut ਕਰੋ ਜਾਂ ਇਸਨੂੰ front shift ਕਰੋ ਤਾਂ ਜੋ ਤੁਸੀਂ ਆਪਣਾ ਡਿਜ਼ਾਈਨ ਬਣਾ ਸਕੋ।
- Extrude ਦੀ ਥਾਂ Cut ਵਰਤ ਕੇ ਪੈਨਲ ਵਿੱਚ ਆਕਾਰ ਕੱਟੋਪੈਨਲ ਦੇ ਚਿਹਰੇ ਉੱਤੇ ਇੱਕ ਆਕਾਰ ਬਣਾਓ ਅਤੇ ਲੋੜੀਂਦੀ ਡੂੰਘਾਈ ਉੱਤੇ ਕਟ-ਆਊਟ ਜਾਂ ਖੱਡਾ ਬਣਾਉਣ ਲਈ Extrude ਦੀ ਥਾਂ Cut ਵਰਤੋ।
- Add wall tiles with tiling and cutting tool, extrude 12 mmAdd wall tiles to a wall by drawing a rectangular area, extruding it to 12 mm and choosing a wall tile material, then adjust the pattern and tile sizes.
- ਐਕਸਟਰੂਡ, ਆਫਸੈੱਟ ਮੂਵ, ਫਿਲੇਟ ਅਤੇ ਕੱਟ ਨਾਲ ਕਸਟਮ ਪੈਨਲ ਡਿਜ਼ਾਈਨ ਬਣਾਓਕਸਟਮ ਪੈਨਲ ਡਿਜ਼ਾਈਨ ਖਿੱਚੋ ਅਤੇ ਆਕਾਰ ਦਿਓ, ਇਸ ਦੇ ਕੋਨੇ ਗੋਲ ਕਰੋ ਅਤੇ ਇੱਕ ਪਾਰ-ਜਾਣ ਵਾਲਾ ਖੁੱਲ੍ਹਾ ਹਿੱਸਾ ਕੱਟੋ।
- ਪਾਥ ਅਤੇ ਪ੍ਰੋਫਾਈਲ ਨਾਲ ਸਵੀਪ ਵਰਤ ਕੇ ਪੈਟਰਨ ਵਾਲੀ ਟ੍ਰਿਮ ਬਣਾਓਟ੍ਰਿਮ ਦਾ ਆਊਟਲਾਈਨ ਪਾਥ ਵਜੋਂ ਖਿੱਚੋ, ਫਿਰ ਪੈਟਰਨ ਵਾਲੀ ਟ੍ਰਿਮ ਜਾਂ ਮੋਲਡਿੰਗ ਬਣਾਉਣ ਲਈ ਉਸ ਦੇ ਨਾਲ-ਨਾਲ ਇੱਕ ਪ੍ਰੋਫਾਈਲ ਸ਼ਕਲ ਸਵੀਪ ਕਰੋ।
- Extrude ਅਤੇ Cut ਨਾਲ ਸ਼ਟਰ ਉੱਤੇ ਟ੍ਰਿਮ ਅਤੇ ਗ੍ਰੂਵ ਡਿਜ਼ਾਈਨ ਬਣਾਓਸ਼ਟਰ ਉੱਤੇ ਟ੍ਰਿਮ ਅਤੇ ਗ੍ਰੂਵ-ਸ਼ੈਲੀ ਡਿਜ਼ਾਈਨ ਬਣਾਉਣ ਲਈ ਖਿੱਚੇ ਗਏ ਖੇਤਰ ਨੂੰ Extrude ਨਾਲ ਅੱਗੇ ਖਿੱਚੋ ਜਾਂ ਕਟ ਡੈਪਥ ਨਾਲ ਧਸਾਓ।
- ਐਕਸਟ੍ਰੂਡ ਅਤੇ ਆਫਸੈੱਟ ਨਾਲ ਫਾਲਸ ਸੀਲਿੰਗ ਡ੍ਰੌਪ ਬਣਾਓਐਕਸਟ੍ਰੂਡ ਅਤੇ ਫਾਲਸ ਸੀਲਿੰਗ ਬਣਾਉਣ ਵਾਲੇ ਟੂਲਾਂ ਨਾਲ ਪੈਰੀਫੈਰਲ ਅਤੇ ਆਈਲੈਂਡ ਫਾਲਸ ਸੀਲਿੰਗ ਬਣਾਓ।
- ਟੈਂਪਲੇਟ, ਕਸਟਮ ਟੈਂਪਲੇਟ ਜਾਂ ਖਾਲੀ ਕੈਨਵਸ ਤੋਂ ਪ੍ਰੋਜੈਕਟ ਸ਼ੁਰੂ ਕਰੋਪਹਿਲਾਂ ਤੋਂ ਪਰਿਭਾਸ਼ਿਤ ਡਿਜ਼ਾਈਨ ਕਿਸਮ, ਆਪਣੀ ਟੈਂਪਲੇਟ ਜਾਂ ਖਾਲੀ ਕੈਨਵਸ ਤੋਂ ਨਵਾਂ ਪ੍ਰੋਜੈਕਟ ਸ਼ੁਰੂ ਕਰੋ।
- Add beams via custom construction with height and depthAdd beams through custom construction with height and depth, while other components such as lofts, wardrobes, cabinets and kitchen elements come directly from the catalog.
- Sweep Tool ਨਾਲ ਕਾਰਨਿਸ, ਮੋਲਡਿੰਗ ਅਤੇ ਵਾਲ ਪੈਨਲਿੰਗ ਸ਼ਾਮਲ ਕਰੋਕਸਟਮ ਕਾਰਨਿਸ, ਮੋਲਡਿੰਗ ਅਤੇ ਸਜਾਵਟੀ ਵਾਲ ਪੈਨਲਿੰਗ ਸ਼ਾਮਲ ਕਰਨ ਲਈ ਦੀਵਾਰਾਂ ਉੱਤੇ Sweep Tool ਵਰਤੋ, ਅਤੇ ਵਾਲ ਮੋਲਡਿੰਗ ਅਤੇ ਸ਼ਟਰ ਡਿਜ਼ਾਈਨ ਲਈ ਟਾਈਲਿੰਗ ਕਟਿੰਗ ਵਿੱਚ sweep mode ਵਰਤੋ।
- Add free text with custom size and color instead of annotationsSet the size and color of free text before you place it, and give different text different colors.
- ਹੈਂਡਲ ਦਾ ਆਕਾਰ ਬਦਲਣਾ, ਐਕਸਟੈਂਸ਼ਨ, ਅਤੇ ਹੈਂਡਲ ਬਦਲਣ 'ਤੇ ਕਸਟਮ ਸਾਈਜ਼ ਕਿਉਂ ਰੀਸੈਟ ਹੁੰਦੇ ਹਨਲਗਾਏ ਹੋਏ ਹੈਂਡਲ ਦੀ ਚੌੜਾਈ, ਉਚਾਈ ਅਤੇ ਡੂੰਘਾਈ ਨੂੰ ਓਵਰਰਾਈਡ ਕਰੋ, ਪ੍ਰੋਫਾਈਲ ਹੈਂਡਲਾਂ 'ਤੇ ਖੱਬੇ/ਸੱਜੇ ਐਕਸਟੈਂਸ਼ਨ ਸ਼ਾਮਲ ਕਰੋ, ਅਤੇ ਦੇਖੋ ਕਿ ਹੈਂਡਲ ਆਈਟਮ ਬਦਲਣ ਨਾਲ ਤੁਹਾਡੇ ਕਸਟਮਾਈਜ਼ੇਸ਼ਨ ਕਿਉਂ ਰੀਸੈਟ ਹੁੰਦੇ ਹਨ।
- Offset only applies to the lines that exist in the sketchWhen you offset a line in panel edit shape, the offset is generated only for the lines already drawn.
- ਪ੍ਰੀਸੈਟਾਂ ਜਾਂ ਕਸਟਮ ਮੁੱਲ ਤੋਂ ਕੰਧ ਦੀ ਮੋਟਾਈ ਸੈੱਟ ਕਰੋਕੈਟਾਲਾਗ ਦੇ ਪ੍ਰੀਸੈਟ ਵਿਕਲਪਾਂ ਵਿੱਚੋਂ ਕੰਧ ਦੀ ਤਿਆਰ ਸਮੱਗਰੀ ਦੀ ਮੋਟਾਈ ਚੁਣੋ ਜਾਂ ਆਪਣਾ ਕਸਟਮ ਮੁੱਲ ਟਾਈਪ ਕਰੋ।
- Show countertops and sinks in floor plans via custom plan cutting planeCreate a new custom plan and set the cutting plane height so countertops draw with continuous lines and sinks appear in the floor plan.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use one cabinet model for any custom sizePlace a single saved cabinet model and enter custom dimensions for non-standard sizes instead of creating a new module for each size.