壁
ガイド:72
- 壁ツールから曲線の壁を作成する壁のドロップダウンで曲線の壁オプションを選んで曲線の壁を描き、その後、半径やその他のプロパティを微調整します。
- 天井の高さから壁の高さとスラブ厚を設定する天井の高さを確認し、同じパネルでスラブ厚を設定して、キッチンレイアウトに正しい壁の高さを設定します。
- ドアと窓を追加する前に、壁の高さと厚さを設定します壁の高さと厚さを設定し、次に高さ、幅、厚さ、高さ位置でドアと窓を定義します。
- 壁付きキャビネットにはベース用プロファイルではなく、壁用ゴラプロファイルを使用してください。壁付きキャビネットにゴラプロファイルを追加する場合は、壁用ゴラプロファイルを選択してください。ベース用プロファイルは壁付きキャビネットには適していません。
- Close walls into a room and edit wall propertiesClose walls into a room, name it, and adjust wall height and thickness from the properties panel.
- Create and open a wall section elevation from a wall face in 3DClick a wall's face in 3D to select that wall section, then add an elevation of that face and open it from the Wall Section Elevation list.
- Fix a disabled wall tool when drawing wallsSwitch to the floor level and 2D floor plan so the wall tool becomes available again.
- Fix two separate walls that cannot be mergedDelete one of the two walls and trim or extend the remaining wall so it spans the full run.
- Set the default wall elevation view distance for your organisationSet the distance used when opening a wall elevation view once as an organisation-wide default instead of changing it per view.
- Understand the wall location line and how typed dimensions are measuredLearn how the location line places wall thickness and which face your typed dimensions are measured from.
- Add base, wall and tall units from the kitchen furniture catalogMark the room as a kitchen so the base, wall and tall units under kitchen furniture in Insert / Furnish are easier to access.
- Add base, wall, tall and loft fillers from the kitchen fillers libraryPlace base, wall unit, wall, tall unit and loft fillers in your kitchen design the same way you place cabinets.
- 壁仕上げ材で壁紙または塗装を追加する壁の仕上げ材オプションから選択して、壁に壁紙または塗装の仕上げを適用します。
- Build layered custom wall designs with tiling and fixed-distance copyCreate a custom wall design such as a rafter by building each layer from a rectangle with its own dimensions and extrude depth.
- Change a wall's length by editing its dimension valueSelect a wall and type a new dimension value to redraw it as a straight wall at the length you set.
- Change wall, door and window properties from the Modify menuAdjust wall dimensions and colours, door and window sizes, window height and elevation, and swap window models from the Modify menu.
- タイル・カットツールを使用して壁に腰壁を作成する壁面に閉じた腰壁の輪郭を描くと、タイル・カットツールがそれを腰壁として適用します。
- Tabでスナップ候補を切り替えて壁を選択作図中にTabとShift+Tabでスナップ候補を切り替え、選択した壁でTabを押すと部屋の輪郭全体を取得できます。
- Cycle wall location line, staircase side and window position with SpacebarPress the spacebar while drawing or moving walls, staircases and windows to cycle their location line, drawing side or position.
- 壁は途切れない一続きのランとして下書きし、壁の中心にドアを配置します各壁を途切れない一続きのランとして描き、壁の中心にスナップしてその上にドアを配置します。
- Draw a wall at an exact length and chain the next wallPoint in the wall's direction, type its length to open a length box, and press Enter so the wall is drawn at exactly that length and the next wall starts from its end.
- Draw a wall from start point to end pointClick the wall's start point, then set its end point by clicking the canvas or typing a length, and close a room by returning to the first start point.
- Arc Drawingモードで曲線の壁を描画するDraw by Bending、Draw around Center、Draw along Tangentを使用して曲線の壁を描画し、壁の左パネルで半径を調整します。
- 床レベルで壁と平面図を描く壁と平面図を描く必要があるレベルと、内装作業で移動するレベルについて説明します。
- Draw walls in the 2D floor plan with exact dimensionsDraw walls in the 2D floor plan by entering height and thickness, then clicking and typing exact lengths.
- Edit wall interiors at room levelWork on the interiors of the wall at room level, rotate the room and view the wall height.
- AI間取り図で検出されなかった短い壁とバルコニーを修正するプラン生成後、AIが検出しなかった短い壁とバルコニーを追加または修正します。
- 許容される最小の壁の長さは100 mmです壁ツールで壁を描く場合、システムが受け付ける最短の壁は100 mmです。
- Front Shiftで壁デザインを壁から離すタイル切断形状にFront Shiftを設定すると、壁付けデザインをプロジェクトの単位の値だけ壁面より手前に移動できます。
- Move or resize a wall with the circular end handleClick the circular handle at one end of a wall and drag it to shorten, extend or reposition the wall.
- Place openings away from walls, then set exact distance by typingMove an opening clear of the wall in 2D and then type its exact distance instead of dragging it.
- Set the wall location line to match the dimension typeMatch the wall location line to the dimension you need so outer-to-outer, inner-to-inner and centre-to-centre values measure from the intended face.
- プリセットまたはカスタム値から壁の厚さを設定します壁の仕上げ材の厚さは、プリセットカタログのオプションから選択するか、独自のカスタム値を入力してください。
- 要素を配置するときに壁の中心インジケーターを確認するカーソルが壁の正確な中心に達すると、ピンクの十字がピンクの三角形に変わり、離れると元に戻ります。
- 床の背景として追加したDWGまたは縮尺付き画像の上に壁をトレースするDWGファイルまたは縮尺付き画像を床トレースの背景として追加し、その上に建築用壁ツールで壁をトレースします。
- Understand why imported 3D models cannot be edited like native wallsLearn why a 3D model built outside Infernia is not recognised as a native Infernia wall and cannot be edited the same way.
- 壁の作図中に方向を固定するにはスペースキーを使用します始点から直線の壁を描き、確定する前に移動しながら内寸を確認します。
- Use the pick tool to select internal wall faces for ceilings and tilingPick internal wall faces to sketch a ceiling and apply tiling, then adjust tile material, pattern, size and grout appearance room by room.
- ドアの開き方向とヒンジを反転し、壁からの距離を設定する配置済みのドアを選択し、側面またはヒンジを反転して、開く方向とヒンジの位置を変更します。
- 3Dの壁から展開図を作成し、リッチ表示またはスケルトン表示を切り替える3D表示で壁から展開図を生成し、リッチ表示とスケルトン表示、その他の表示モードを切り替えます。
- ルームテンプレートからデザインを開始し、壁のサイズを変更するルームテンプレートから新しいデザインを開始します。テンプレートにはルームが事前に作成されています。次に、壁を選択して寸法を変更し、サイズを変更します。
- 壁セクションと検索で壁に幅木を追加する内壁の壁幅木をオンにし、検索して希望の幅木ベースを見つけます。
- 壁に幅木を追加する壁を選択し、wall skirting をオンにすると、その壁に幅木を追加できます。
- 壁セクションのプロパティパネルから壁幅木を適用する壁セクションのプロパティパネルでWall Skirtingをオンにし、壁に適用する幅木の仕上げを選択します。
- 幅、高さ、厚さ、壁からの距離を指定してドアを追加および編集する間取り図の壁にドアを配置し、サイズと壁からの距離を設定して、モデルと素材を変更します。
- 壁の厚さを貫通するように押し出して、ドアや窓の切り抜きを作成します壁にドアや窓の開口部を切り抜くには、切り抜く領域を描画し、壁の厚さを貫通するように押し出します。
- Draw ceilings from the room corner with no wall gapAdd a ceiling by drawing a rectangle from the ceiling command menu, then add tiling the same way.
- 壁面をクリックして立面図を生成する壁の表面をクリックすると、白黒またはカラーの立面図が自動的に生成されます。
- 平面図から天井を追加し、立面を壁の高さに合わせる平面図ビューで天井オプションを選択し、室内に適用して天井を追加します。
- 壁を選択してタイルツールを使用し、壁タイルを追加します壁を選択し、タイル・カットツールでタイル領域を描画して、壁にタイルを追加します。
- Build a TV unit from modular base, wall and open unitsOpen the Furnish panel, choose multi-purpose modular furniture, and combine, rotate and position units to compose a TV unit.
- ウィンドウを中央に配置し、壁からの正確な間隔を設定するウィンドウを壁の中央に配置し、壁からの距離を正確に指定します。
- 基本の設計手順:壁、ドア、窓、天井、タイル壁を描き、ドアを追加し、窓を追加し、天井を追加し、タイルを追加して設計を完了します。
- Create a room by adding walls, openings, ceiling and tiles in sequenceClose the walls fully so the ceiling tool detects the room area and measures the ceiling automatically, then view and edit the room in 3D.
- Create a room by closing all walls into a loopClose all wall segments into a fully closed loop without overlapping boundary lines so the software generates the room automatically.
- Move a door or window to an exact distance from the wall sidePlace an opening centered on a wall, then use its side dimensions to set the exact distance from either side.
- Front shiftで間仕切りとパターンを壁から前方にオフセットする壁からの前方オフセットを設定すると、間仕切り、垂木、描画パターンを希望する距離に配置できます。
- 勾配天井の高さを壁の高さから天井の厚さを引いた値に設定する勾配天井の形状と厚さを定義し、その高さを壁の高さから天井の厚さを引いた値に設定すると、天井が壁の頂部の下に正しく収まります。
- Turn on auto snapping to constrain walls to 90 degreesTurn on Orthogonal Snapping so the walls and lines you draw stay at 90 degrees, then join walls with Trim/Extend to Corner.
- Add a door to a wallPlace a door on a wall from the Architecture or Home tab and set it up in the Door panel.
- Sweep Toolでコーニス、モールディング、壁パネルを追加する壁にSweep Toolを使用して、カスタムのコーニス、モールディング、装飾的な壁パネルを追加できます。また、タイル切断のsweepモードを壁モールディングやシャッターのデザインに使用できます。
- Create and edit rooms from enclosed wallsEnclose four walls to get an automatic floor and room text, then rename the room and change its text properties.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Place doors after walls and edit size, height, thickness, hinge and modelAdd doors after your walls are ready, then adjust each door's size, orientation and model so it looks right in 3D.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.
- Set room dimensions from center or inner walls and pick room typeSwitch room dimensions to inner-wall measurements and choose a room type so Insert and Furnish only offers matching furniture and accessories.
- Set room inner dimensions and wall height before designingSet the left wall height and thickness and name the room so it is identifiable in the project before you start designing.
- ドラッグした窓が壁の中央に配置されたタイミングを確認する選択した窓を壁に沿ってドラッグし、ピンクのマーカーで中央に配置されたタイミングを確認します。
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- キーボードショートカットを使用して壁、家具、タイルを追加する家具の追加、壁の描画、タイルの追加、ドアの配置などの一般的なコマンドは、短いコードを入力して Enter キーを押すことで実行できます。