墙体
指南:72
- 从墙体工具创建弧形墙在墙体下拉菜单中选择弧形墙选项以绘制弧形墙,然后微调其半径和其他属性。
- 根据天花板标高设置墙高和楼板厚度通过读取天花板标高并在同一面板中设置楼板厚度,为厨房布局确定正确的墙高。
- 在添加门窗之前,先设置墙体高度和厚度设置墙体高度和厚度,然后按高度、宽度、厚度和离地高度定义门窗。
- 壁柜请使用墙面gola型材,不要使用地柜型材为壁柜添加gola型材时,请选择墙面gola型材,因为地柜型材不适用于壁柜。
- Close walls into a room and edit wall propertiesClose walls into a room, name it, and adjust wall height and thickness from the properties panel.
- Create and open a wall section elevation from a wall face in 3DClick a wall's face in 3D to select that wall section, then add an elevation of that face and open it from the Wall Section Elevation list.
- Fix a disabled wall tool when drawing wallsSwitch to the floor level and 2D floor plan so the wall tool becomes available again.
- Fix two separate walls that cannot be mergedDelete one of the two walls and trim or extend the remaining wall so it spans the full run.
- Set the default wall elevation view distance for your organisationSet the distance used when opening a wall elevation view once as an organisation-wide default instead of changing it per view.
- Understand the wall location line and how typed dimensions are measuredLearn how the location line places wall thickness and which face your typed dimensions are measured from.
- Add base, wall and tall units from the kitchen furniture catalogMark the room as a kitchen so the base, wall and tall units under kitchen furniture in Insert / Furnish are easier to access.
- Add base, wall, tall and loft fillers from the kitchen fillers libraryPlace base, wall unit, wall, tall unit and loft fillers in your kitchen design the same way you place cabinets.
- 通过墙面饰面材料添加壁纸或涂料从墙面的饰面材料选项中选择壁纸或涂料饰面,即可为墙面添加该饰面。
- Build layered custom wall designs with tiling and fixed-distance copyCreate a custom wall design such as a rafter by building each layer from a rectangle with its own dimensions and extrude depth.
- Change a wall's length by editing its dimension valueSelect a wall and type a new dimension value to redraw it as a straight wall at the length you set.
- Change wall, door and window properties from the Modify menuAdjust wall dimensions and colours, door and window sizes, window height and elevation, and swap window models from the Modify menu.
- 使用铺砖与切割工具在墙面上创建护墙板在墙面上绘制一个闭合的护墙板轮廓,铺砖与切割工具会将其作为护墙板应用。
- 用 Tab 循环切换捕捉候选并选择墙体绘制时使用 Tab 和 Shift+Tab 循环切换捕捉候选;选中墙体后按 Tab 可抓取整个房间轮廓。
- Cycle wall location line, staircase side and window position with SpacebarPress the spacebar while drawing or moving walls, staircases and windows to cycle their location line, drawing side or position.
- 将墙体绘制为完整不间断的墙段,并将门放置在墙体中心将每面墙绘制为一段不间断的墙段,并通过捕捉到墙体中心在其上放置门。
- Draw a wall at an exact length and chain the next wallPoint in the wall's direction, type its length to open a length box, and press Enter so the wall is drawn at exactly that length and the next wall starts from its end.
- Draw a wall from start point to end pointClick the wall's start point, then set its end point by clicking the canvas or typing a length, and close a room by returning to the first start point.
- 使用Arc Drawing模式绘制弧形墙使用 Draw by Bending、Draw around Center 或 Draw along Tangent 绘制弧形墙,并在墙的左侧面板中调整半径。
- 在地面层绘制墙体和平面图了解墙体和平面图必须在哪个层级绘制,以及进行室内工作时在哪些层级之间切换。
- Draw walls in the 2D floor plan with exact dimensionsDraw walls in the 2D floor plan by entering height and thickness, then clicking and typing exact lengths.
- Edit wall interiors at room levelWork on the interiors of the wall at room level, rotate the room and view the wall height.
- 修复 AI 平面图遗漏的短墙和阳台生成平面图后,添加或修正 AI 未检测到的短墙和阳台。
- 允许的最小墙长为 100 mm使用墙体工具绘制墙体时,系统接受的最短墙长为 100 mm。
- 使用Front Shift将墙面设计移离墙面在铺砖切割形状上设置Front Shift,即可按项目单位中的数值将贴墙设计向前移离墙面。
- Move or resize a wall with the circular end handleClick the circular handle at one end of a wall and drag it to shorten, extend or reposition the wall.
- Place openings away from walls, then set exact distance by typingMove an opening clear of the wall in 2D and then type its exact distance instead of dragging it.
- Set the wall location line to match the dimension typeMatch the wall location line to the dimension you need so outer-to-outer, inner-to-inner and centre-to-centre values measure from the intended face.
- 从预设或自定义值设置墙体厚度从预设目录选项中选择墙体的饰面材料厚度,或输入您自己的自定义值。
- 放置元素时识别墙体中心指示器当光标到达墙体的正中心时,粉色十字会变成粉色三角形;移开后又会变回十字。
- 在作为楼层背景添加的 DWG 或已缩放图像上描绘墙体添加 DWG 文件或已缩放图像作为楼层描绘背景,然后使用建筑墙体工具在其上描绘墙体。
- Understand why imported 3D models cannot be edited like native wallsLearn why a 3D model built outside Infernia is not recognised as a native Infernia wall and cannot be edited the same way.
- 绘制墙体时使用空格键锁定方向从起点绘制一段直墙,并在移动时查看其内部尺寸,然后再确认。
- Use the pick tool to select internal wall faces for ceilings and tilingPick internal wall faces to sketch a ceiling and apply tiling, then adjust tile material, pattern, size and grout appearance room by room.
- 翻转门扇开向和合页,并设置与墙的距离选择已放置的门,翻转其侧边或合页,以更改开启方向和合页位置。
- 从 3D 墙体创建立面,并在丰富视图或骨架视图之间切换在 3D 视图中从墙体生成立面,然后在丰富视图、骨架视图和其他显示模式之间切换。
- 从房间模板开始设计并调整其墙体尺寸使用房间模板开始新设计,该模板自带一个预先创建好的房间;然后选择墙体并更改其尺寸来调整大小。
- 通过墙面截面和搜索为墙壁添加踢脚线为内墙开启墙面踢脚线,并通过搜索找到所需的踢脚线底座。
- 为墙面添加踢脚线选择一面墙并开启墙面踢脚线,即可为其添加踢脚线。
- 从墙面部分的属性面板应用墙踢脚线在墙面部分的属性面板中开启Wall Skirting,并选择要应用到墙面的踢脚线饰面。
- 添加和编辑门,可设置宽度、高度、厚度和墙距在平面图中将门放置在墙上,设置其尺寸和与墙的距离,并更改其型号和材质。
- 通过贯穿墙体厚度进行挤出,创建门窗洞口在墙上为门或窗开洞:绘制切割区域,并将其贯穿墙体厚度挤出。
- 从房间角落绘制天花板,不留墙缝通过天花板命令菜单绘制矩形来添加天花板,然后用同样的方式添加铺砖。
- 点击墙面生成立面图点击墙面即可自动生成其立面图,可选择黑白或彩色。
- 从平面图添加天花板,并使标高与墙高匹配在平面图视图中选择天花板选项,并在房间内应用,即可添加天花板。
- 选择墙面并使用铺贴工具,为墙面添加瓷砖铺贴选择墙面,使用铺贴与切割工具绘制铺贴区域,即可为墙面添加铺贴。
- Build a TV unit from modular base, wall and open unitsOpen the Furnish panel, choose multi-purpose modular furniture, and combine, rotate and position units to compose a TV unit.
- 将窗户居中并设置精确的墙面间距将窗户放在墙面中央,并设置它与墙面的精确距离。
- 核心设计步骤:墙体、门、窗、天花板和瓷砖绘制墙体、添加门、添加窗、添加天花板并添加瓷砖,即可完成设计。
- Create a room by adding walls, openings, ceiling and tiles in sequenceClose the walls fully so the ceiling tool detects the room area and measures the ceiling automatically, then view and edit the room in 3D.
- Create a room by closing all walls into a loopClose all wall segments into a fully closed loop without overlapping boundary lines so the software generates the room automatically.
- Move a door or window to an exact distance from the wall sidePlace an opening centered on a wall, then use its side dimensions to set the exact distance from either side.
- 使用 Front shift 将隔断和图案从墙面向前偏移设置从墙面向前偏移的距离,使隔断、椽条和绘制的图案位于您想要的距离处。
- 将跌级吊顶的标高设置为墙高减去吊顶厚度定义跌级吊顶的形状和厚度,然后将其标高设置为墙高减去吊顶厚度,使吊顶正确位于墙顶下方。
- Turn on auto snapping to constrain walls to 90 degreesTurn on Orthogonal Snapping so the walls and lines you draw stay at 90 degrees, then join walls with Trim/Extend to Corner.
- Add a door to a wallPlace a door on a wall from the Architecture or Home tab and set it up in the Door panel.
- 使用 Sweep Tool 添加檐口、线脚和墙面镶板在墙面上使用 Sweep Tool 可添加自定义檐口、线脚和装饰性墙面镶板;在瓷砖切割中使用 sweep 模式可处理墙面线脚和百叶窗设计。
- Create and edit rooms from enclosed wallsEnclose four walls to get an automatic floor and room text, then rename the room and change its text properties.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Place doors after walls and edit size, height, thickness, hinge and modelAdd doors after your walls are ready, then adjust each door's size, orientation and model so it looks right in 3D.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.
- Set room dimensions from center or inner walls and pick room typeSwitch room dimensions to inner-wall measurements and choose a room type so Insert and Furnish only offers matching furniture and accessories.
- Set room inner dimensions and wall height before designingSet the left wall height and thickness and name the room so it is identifiable in the project before you start designing.
- 判断拖动的窗户何时在其墙面上居中沿墙面拖动选中的窗户,观察粉色标记以了解它何时居中。
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- 使用键盘快捷键添加墙体、家具和瓷砖输入简短代码并按 Enter,即可触发添加家具、绘制墙体、添加瓷砖或放置门等常用命令。