দেয়াল
গাইড: 72
- walls tool থেকে বাঁকা দেয়াল তৈরি করুনবাঁকা দেয়াল আঁকতে walls dropdown-এ curved wall অপশনটি বেছে নিন, তারপর এর ব্যাসার্ধ ও অন্যান্য বৈশিষ্ট্য সূক্ষ্মভাবে সমন্বয় করুন।
- সিলিং এলিভেশন থেকে দেয়ালের উচ্চতা ও স্ল্যাবের পুরুত্ব নির্ধারণ করুনসিলিংয়ের এলিভেশন দেখে এবং একই প্যানেল থেকে স্ল্যাবের পুরুত্ব নির্ধারণ করে কিচেন লেআউটের জন্য সঠিক দেয়ালের উচ্চতা ঠিক করুন।
- দরজা ও জানালা যোগ করার আগে দেয়ালের উচ্চতা ও পুরুত্ব নির্ধারণ করুনদেয়ালের উচ্চতা ও পুরুত্ব নির্ধারণ করুন, তারপর উচ্চতা, প্রস্থ, পুরুত্ব ও উচ্চতা-উত্থান দিয়ে দরজা ও জানালা নির্ধারণ করুন।
- ওয়াল ইউনিটের জন্য ওয়াল গোলা প্রোফাইল ব্যবহার করুন, বেস প্রোফাইল নয়ওয়াল ক্যাবিনেটে গোলা প্রোফাইল যোগ করার সময় ওয়াল গোলা প্রোফাইল বেছে নিন, কারণ বেস প্রোফাইল ওয়াল ইউনিটের জন্য উপযুক্ত নয়।
- Close walls into a room and edit wall propertiesClose walls into a room, name it, and adjust wall height and thickness from the properties panel.
- Create and open a wall section elevation from a wall face in 3DClick a wall's face in 3D to select that wall section, then add an elevation of that face and open it from the Wall Section Elevation list.
- Fix a disabled wall tool when drawing wallsSwitch to the floor level and 2D floor plan so the wall tool becomes available again.
- Fix two separate walls that cannot be mergedDelete one of the two walls and trim or extend the remaining wall so it spans the full run.
- Set the default wall elevation view distance for your organisationSet the distance used when opening a wall elevation view once as an organisation-wide default instead of changing it per view.
- Understand the wall location line and how typed dimensions are measuredLearn how the location line places wall thickness and which face your typed dimensions are measured from.
- Add base, wall and tall units from the kitchen furniture catalogMark the room as a kitchen so the base, wall and tall units under kitchen furniture in Insert / Furnish are easier to access.
- Add base, wall, tall and loft fillers from the kitchen fillers libraryPlace base, wall unit, wall, tall unit and loft fillers in your kitchen design the same way you place cabinets.
- ওয়াল ফিনিশ মেটেরিয়ালের মাধ্যমে ওয়ালপেপার বা পেইন্ট যোগ করুনদেয়ালের ফিনিশ মেটেরিয়াল অপশন থেকে বেছে নিয়ে দেয়ালে ওয়ালপেপার বা পেইন্ট ফিনিশ দিন।
- Build layered custom wall designs with tiling and fixed-distance copyCreate a custom wall design such as a rafter by building each layer from a rectangle with its own dimensions and extrude depth.
- Change a wall's length by editing its dimension valueSelect a wall and type a new dimension value to redraw it as a straight wall at the length you set.
- Change wall, door and window properties from the Modify menuAdjust wall dimensions and colours, door and window sizes, window height and elevation, and swap window models from the Modify menu.
- টাইলিং এবং কাটিং টুল ব্যবহার করে দেয়ালে একটি ড্যাডো তৈরি করুনদেয়ালের পৃষ্ঠে একটি বদ্ধ ড্যাডো আউটলাইন আঁকুন যাতে টাইলিং এবং কাটিং টুল এটি ড্যাডো হিসেবে প্রয়োগ করে।
- Tab দিয়ে স্ন্যাপ প্রার্থীগুলো সাইকেল করুন এবং দেয়াল নির্বাচন করুনআঁকার সময় স্ন্যাপ প্রার্থীগুলো সাইকেল করতে Tab এবং Shift+Tab ব্যবহার করুন, আর নির্বাচিত দেয়ালে Tab চাপলে পুরো রুমের আউটলাইন ধরা পড়বে।
- Cycle wall location line, staircase side and window position with SpacebarPress the spacebar while drawing or moving walls, staircases and windows to cycle their location line, drawing side or position.
- দেয়ালগুলোকে সম্পূর্ণ অবিচ্ছিন্ন রান হিসেবে ড্রাফট করুন এবং দেয়ালের কেন্দ্রে দরজা বসানপ্রতিটি দেয়ালকে একটি অবিচ্ছিন্ন রান হিসেবে আঁকুন এবং দেয়ালের কেন্দ্রে স্ন্যাপ করে তার উপর দরজা বসান।
- Draw a wall at an exact length and chain the next wallPoint in the wall's direction, type its length to open a length box, and press Enter so the wall is drawn at exactly that length and the next wall starts from its end.
- Draw a wall from start point to end pointClick the wall's start point, then set its end point by clicking the canvas or typing a length, and close a room by returning to the first start point.
- Arc Drawing মোডে বাঁকা দেয়াল আঁকুনDraw by Bending, Draw around Center বা Draw along Tangent ব্যবহার করে বাঁকা দেয়াল আঁকুন, এবং দেয়ালের বাম প্যানেল থেকে ব্যাসার্ধ সমন্বয় করুন।
- মেঝে স্তরে দেয়াল ও ফ্লোর প্ল্যান আঁকুনকোন স্তরে দেয়াল ও ফ্লোর প্ল্যান আঁকতে হবে এবং ইন্টেরিয়র কাজের জন্য কোন কোন স্তরের মধ্যে চলাচল করবেন, তা জানুন।
- Draw walls in the 2D floor plan with exact dimensionsDraw walls in the 2D floor plan by entering height and thickness, then clicking and typing exact lengths.
- Edit wall interiors at room levelWork on the interiors of the wall at room level, rotate the room and view the wall height.
- AI ফ্লোরপ্ল্যানে বাদ পড়া ছোট দেয়াল ও বারান্দা ঠিক করুনপ্ল্যান তৈরি করার পর, AI যে ছোট দেয়াল ও বারান্দা শনাক্ত করেনি সেগুলো যোগ করুন বা সংশোধন করুন।
- অনুমোদিত সর্বনিম্ন দেয়ালের দৈর্ঘ্য 100 mmআপনি যখন wall tool দিয়ে দেয়াল আঁকেন, সিস্টেম যে সর্বনিম্ন দৈর্ঘ্যের দেয়াল গ্রহণ করে তা হলো 100 mm।
- Front Shift দিয়ে ওয়াল ডিজাইন দেয়াল থেকে সরানআপনার প্রজেক্টের এককে ওয়াল-মাউন্টেড ডিজাইন দেয়ালের পৃষ্ঠ থেকে সামনে সরাতে tiling-cutting shape-এ Front Shift সেট করুন।
- Move or resize a wall with the circular end handleClick the circular handle at one end of a wall and drag it to shorten, extend or reposition the wall.
- Place openings away from walls, then set exact distance by typingMove an opening clear of the wall in 2D and then type its exact distance instead of dragging it.
- Set the wall location line to match the dimension typeMatch the wall location line to the dimension you need so outer-to-outer, inner-to-inner and centre-to-centre values measure from the intended face.
- প্রিসেট থেকে বা কাস্টম মান দিয়ে দেয়ালের পুরুত্ব নির্ধারণ করুনপ্রিসেট ক্যাটালগের বিকল্প থেকে দেয়ালের সমাপ্ত উপাদানের পুরুত্ব বেছে নিন অথবা নিজের কাস্টম মান টাইপ করুন।
- একটি এলিমেন্ট বসানোর সময় দেয়ালের কেন্দ্র নির্দেশক চিহ্নটি খেয়াল করুনকার্সার দেয়ালের সঠিক কেন্দ্রে পৌঁছালে গোলাপি ক্রসটি গোলাপি ত্রিভুজে পরিণত হয় এবং সরে গেলে আবার আগের রূপে ফিরে আসে—এটি লক্ষ্য করুন।
- ফ্লোর ব্যাকগ্রাউন্ড হিসেবে যোগ করা DWG বা স্কেল করা ছবির উপর দেয়াল ট্রেস করুনফ্লোর ট্রেসিং ব্যাকগ্রাউন্ড হিসেবে একটি DWG ফাইল বা স্কেল করা ছবি যোগ করুন, তারপর আর্কিটেকচারাল wall tools দিয়ে তার উপর দেয়াল ট্রেস করুন।
- Understand why imported 3D models cannot be edited like native wallsLearn why a 3D model built outside Infernia is not recognised as a native Infernia wall and cannot be edited the same way.
- দেয়াল আঁকার সময় দিক লক করতে spacebar ব্যবহার করুনএকটি শুরুর বিন্দু থেকে সোজা দেয়াল আঁকুন এবং নিশ্চিত করার আগে সরানোর সময় এর অভ্যন্তরীণ মাপ দেখে নিন।
- Use the pick tool to select internal wall faces for ceilings and tilingPick internal wall faces to sketch a ceiling and apply tiling, then adjust tile material, pattern, size and grout appearance room by room.
- দরজার সুইং ও কব্জা ফ্লিপ করুন এবং দেয়াল থেকে দূরত্ব নির্ধারণ করুনস্থাপিত দরজা নির্বাচন করে তার পাশ বা কব্জা ফ্লিপ করুন, যাতে দরজাটি কোন দিকে খুলবে এবং কোথায় কব্জা থাকবে তা পরিবর্তন হয়।
- একটি 3D ওয়াল থেকে এলিভেশন তৈরি করুন এবং rich বা skeleton ভিউ টগল করুন3D ভিউতে একটি ওয়াল থেকে এলিভেশন তৈরি করুন, তারপর rich ভিউ ও skeleton ভিউ এবং অন্যান্য ডিসপ্লে মোডের মধ্যে সুইচ করুন।
- রুম টেমপ্লেট থেকে একটি ডিজাইন শুরু করুন এবং এর দেয়ালের আকার পরিবর্তন করুনরুম টেমপ্লেট থেকে একটি নতুন ডিজাইন শুরু করুন, যেখানে একটি আগে থেকে তৈরি করা রুম থাকে; তারপর দেয়াল নির্বাচন করে এবং তাদের মাপ পরিবর্তন করে এর আকার পরিবর্তন করুন।
- ওয়াল সেকশন ও সার্চের মাধ্যমে দেয়ালে স্কার্টিং যোগ করুনআপনার ভেতরের দেয়ালের জন্য ওয়াল স্কার্টিং চালু করুন এবং সার্চ করে আপনার পছন্দের স্কার্টিং বেস খুঁজে নিন।
- দেয়ালে স্কার্টিং যোগ করুনএকটি দেয়াল নির্বাচন করুন এবং সেখানে স্কার্টিং যোগ করতে wall skirting চালু করুন।
- ওয়াল সেকশনের properties panel থেকে ওয়াল স্কার্টিং প্রয়োগ করুনওয়াল সেকশনের properties panel-এ Wall Skirting চালু করুন এবং দেয়ালে প্রয়োগ করার জন্য স্কার্টিং ফিনিশ বেছে নিন।
- প্রস্থ, উচ্চতা, বেধ এবং দেয়াল থেকে দূরত্বসহ দরজা যোগ করুন ও সম্পাদনা করুনফ্লোর প্ল্যানে একটি দেয়ালে দরজা বসান, এর আকার ও দেয়াল থেকে দূরত্ব নির্ধারণ করুন এবং এর মডেল ও উপাদান পরিবর্তন করুন।
- দেয়ালের পুরুত্ব ভেদ করে এক্সট্রুড করে দরজা বা জানালার কাটআউট তৈরি করুনকাটার এলাকা এঁকে এবং তা দেয়ালের পুরুত্ব ভেদ করে এক্সট্রুড করে দেয়ালে দরজা বা জানালার জন্য একটি খোলা তৈরি করুন।
- দেয়ালের ফাঁক ছাড়াই ঘরের কোণ থেকে সিলিং আঁকুনসিলিং কমান্ড মেনু থেকে একটি আয়তক্ষেত্র এঁকে সিলিং যোগ করুন, তারপর একইভাবে টাইলিং যোগ করুন।
- একটি দেয়ালের পৃষ্ঠে ক্লিক করে একটি এলিভেশন তৈরি করুনএর এলিভেশন স্বয়ংক্রিয়ভাবে তৈরি করতে একটি দেয়ালের পৃষ্ঠে ক্লিক করুন, সাদা-কালো বা রঙিন।
- ফ্লোর প্ল্যান থেকে সিলিং যোগ করুন এবং এলিভেশন দেয়ালের উচ্চতার সাথে মিলিয়ে নিনফ্লোর প্ল্যান ভিউতে সিলিং অপশন নির্বাচন করে এবং ঘরের ভিতরে তা প্রয়োগ করে একটি সিলিং যোগ করুন।
- দেয়াল নির্বাচন করে এবং টাইলিং টুল ব্যবহার করে দেয়ালে টাইলিং যোগ করুনদেয়াল নির্বাচন করে এবং টাইলিং ও কাটিং টুল দিয়ে টাইলযুক্ত এলাকা আঁকিয়ে দেয়ালে টাইলিং যোগ করুন।
- Build a TV unit from modular base, wall and open unitsOpen the Furnish panel, choose multi-purpose modular furniture, and combine, rotate and position units to compose a TV unit.
- একটি জানালা কেন্দ্রে রাখুন এবং দেয়ালের সঠিক দূরত্ব নির্ধারণ করুনএকটি জানালা দেয়ালের মাঝখানে রাখুন এবং দেয়াল থেকে এর সঠিক দূরত্ব নির্ধারণ করুন।
- মূল ডিজাইন ধাপ: দেয়াল, দরজা, জানালা, সিলিং এবং টাইলিংএকটি ডিজাইন সম্পূর্ণ করতে দেয়াল আঁকুন, দরজা যোগ করুন, জানালা যোগ করুন, সিলিং যোগ করুন এবং টাইলিং যোগ করুন।
- Create a room by adding walls, openings, ceiling and tiles in sequenceClose the walls fully so the ceiling tool detects the room area and measures the ceiling automatically, then view and edit the room in 3D.
- Create a room by closing all walls into a loopClose all wall segments into a fully closed loop without overlapping boundary lines so the software generates the room automatically.
- Move a door or window to an exact distance from the wall sidePlace an opening centered on a wall, then use its side dimensions to set the exact distance from either side.
- Front shift দিয়ে পার্টিশন ও প্যাটার্ন দেয়াল থেকে সামনের দিকে অফসেট করুনদেয়াল থেকে একটি সামনের অফসেট নির্ধারণ করুন যাতে পার্টিশন, রাফটার ও আঁকা প্যাটার্ন আপনার কাঙ্ক্ষিত দূরত্বে থাকে।
- ফল সিলিংয়ের এলিভেশন দেয়ালের উচ্চতা থেকে সিলিংয়ের পুরুত্ব বিয়োগ করে সেট করুনফল সিলিংয়ের আকৃতি ও পুরুত্ব নির্ধারণ করুন, তারপর এর এলিভেশন দেয়ালের উচ্চতা থেকে সিলিংয়ের পুরুত্ব বিয়োগ করে সেট করুন, যাতে সিলিংটি দেয়ালের উপরের অংশের নিচে সঠিকভাবে বসে।
- Turn on auto snapping to constrain walls to 90 degreesTurn on Orthogonal Snapping so the walls and lines you draw stay at 90 degrees, then join walls with Trim/Extend to Corner.
- Add a door to a wallPlace a door on a wall from the Architecture or Home tab and set it up in the Door panel.
- Sweep Tool দিয়ে কর্নিস, মোল্ডিং এবং ওয়াল প্যানেলিং যোগ করুনকাস্টম কর্নিস, মোল্ডিং এবং আলংকারিক ওয়াল প্যানেলিং যোগ করতে দেয়ালে Sweep Tool ব্যবহার করুন, এবং ওয়াল মোল্ডিং ও শাটার ডিজাইনের জন্য টাইলিং কাটিং-এ sweep mode ব্যবহার করুন।
- Create and edit rooms from enclosed wallsEnclose four walls to get an automatic floor and room text, then rename the room and change its text properties.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Place doors after walls and edit size, height, thickness, hinge and modelAdd doors after your walls are ready, then adjust each door's size, orientation and model so it looks right in 3D.
- Set default door, window and wall properties via PreferencesSet default properties for repeated elements so newly added doors, windows, elevations and walls inherit the same values across all rooms.
- Set room dimensions from center or inner walls and pick room typeSwitch room dimensions to inner-wall measurements and choose a room type so Insert and Furnish only offers matching furniture and accessories.
- Set room inner dimensions and wall height before designingSet the left wall height and thickness and name the room so it is identifiable in the project before you start designing.
- একটি টেনে সরানো জানালা তার দেয়ালে কেন্দ্রীভূত হলে তা জানুননির্বাচিত জানালা তার দেয়াল বরাবর টেনে সরান এবং গোলাপি চিহ্নগুলি পড়ে দেখুন এটি কখন কেন্দ্রে অবস্থান করে।
- Trim an extra wall or room-divider segmentRemove an extra wall or room-divider segment using the trim shortcut T R or the trim option in the on-screen menu.
- দেয়াল, আসবাবপত্র ও টাইলিং যোগ করতে কীবোর্ড শর্টকাট ব্যবহার করুনসংক্ষিপ্ত কোড টাইপ করে Enter চাপুন এবং আসবাবপত্র যোগ করা, দেয়াল আঁকা, টাইলিং যোগ করা বা দরজা বসানোর মতো সাধারণ কমান্ড চালু করুন।
আরও গাইড 2
সব দেখুন (2)
- AI ফ্লোরপ্ল্যান জেনারেটর দিয়ে একটি ফ্লোর প্ল্যান তৈরি করুনএকটি ইনপুট থেকে এক মিনিটেরও কম সময়ে একটি ফ্লোর প্ল্যান তৈরি করুন, তারপর খুব ছোট দৈর্ঘ্যের দেয়াল ও বারান্দা ম্যানুয়ালি যাচাই ও সংশোধন করুন।
- তৈরি করা প্রোফাইলের দিক সংশোধন করতে প্রোফাইল ওরিয়েন্টেশন টগল করুনটাইলিং এবং কাটিং টুলে দেয়াল ও টপ শেপ নির্বাচন করুন, তারপর ভুল দিকে থাকা তৈরি করা প্রোফাইল ফ্লিপ করুন।