Floors, buildings and reference levels
Guides: 31
- How to export a floor as DWGExport a floor from your design to AutoCAD by choosing the file type and AutoCAD release and downloading it.
- See all floors of a building togetherSwitch to the building level and open the 3D view to see every floor of a building at once.
- Use drops as a floor drop or backsplash and raise the countertopSet a drop's height and shift so it reaches the floor, covers the tiling, or lifts the countertop to the required level.
- Add a building with New Blank Building or Copy BuildingOpen the buildings dropdown's '+ Add Building' panel to create a new blank building or copy an existing one, then manage buildings from the world menu.
- Add a new floor by copying or starting blankAdd another storey from the current floor level using the add-floor option.
- Add a reference level in an elevation viewOpen an elevation view and place a reference level at the height you want, then rename it or change its elevation.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Copy an object to the same position on another floorCopy an object and paste it onto one or more other floors so it lands at the same plan position there.
- Move between buildings, floors, rooms and viewsUse the navigation toolbar to shift location within a project instead of editing geometry.
- Raise an object above the floor in 3D room viewSwitch to the 3D room view, go inside the room, select the object and move it upward to raise it above the floor.
- Set the bottom level of a floorSet the bottom elevation of a floor from the Floor left menu so its extent starts at the right level.
- Set up a floor's name, extent, tracing background and base in the floor menuOpen the Floor icon at the bottom left of the design portal to set the floor's name, extent, tracing background, floor base and export, and add Floor Outlines once the building has two or more floors.
- Switch between building, floor and room viewsSwitch between the building view and the floor view, and select a specific room to view.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.
- Work with building blocks, floor levels and rooms from the layoutCreate building blocks and floor levels in a project, then lay out a floor and define its rooms from that layout.
- Work with levels as real-world floorsLevels in Infurnia reflect real-world floors so you can model multi-floor projects.
- Extend a panel down to the floor instead of skirtingMake a panel continue to the floor instead of showing skirting by using the extension parameters in its construction settings.
- How wardrobe side panels reach the floorLearn how wardrobe side panels run full length to the floor and why a cutout is made for the front skirting.
- Plan drawers, shutters and partitions before buildingSet shelf reveal, partition heights and shutter or drawer zones before customizing the internals.
- Extend panels to the floor using construction settings and formulasExtend a visible panel to the ground through its construction settings and drive panel sizes with formulas so they adjust automatically.
- Extend a cabinet end panel to the floor or ceilingExtend an end panel added from a cabinet's End Panel section downward to the floor or upward from its own panel using the Width Extension values.
- Organise a design into rooms, floors and buildingsLearn how the design space is organised into room, floor and building levels, and create floors when a house has multiple storeys.
- Draw walls and floor plans at the floor levelLearn which level walls and floor plans must be drawn at, and which levels you move between for interior work.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Name rooms and floors so factory and quotation filters workDefine a project's buildings, floors and rooms when you create it so factory and quotation filters work.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- Trace walls over a DWG or scaled image added as floor backgroundAdd a DWG file or a scaled image as the floor tracing background, then trace walls over it with the architectural wall tools.
- Upload DWG files or images as tracing backgrounds in floor settingsUpload a DWG file or an image in floor settings to use it as a tracing background.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.