Katlar, binalar ve referans seviyeleri
Rehberler: 31
- Bir kat nasıl DWG olarak dışa aktarılırTasarımınızdaki bir katı, dosya türünü ve AutoCAD sürümünü seçip indirerek AutoCAD'e aktarın.
- Bir binanın tüm katlarını birlikte görünBir binanın her katını aynı anda görmek için bina düzeyine geçin ve 3D görünümü açın.
- Düşümleri zemin düşümü veya tezgah arkası paneli olarak kullanın ve tezgahı yükseltinBir düşümün yüksekliğini ve kaydırmasını, zemine ulaşacak, seramik kaplamayı örtecek veya tezgahı gereken seviyeye kaldıracak şekilde ayarlayın.
- Add a building with New Blank Building or Copy BuildingOpen the buildings dropdown's '+ Add Building' panel to create a new blank building or copy an existing one, then manage buildings from the world menu.
- Add a new floor by copying or starting blankAdd another storey from the current floor level using the add-floor option.
- Add a reference level in an elevation viewOpen an elevation view and place a reference level at the height you want, then rename it or change its elevation.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Bir nesneyi başka bir katta aynı konuma kopyalayınBir nesneyi kopyalayıp bir veya daha fazla başka kata yapıştırın; böylece orada aynı plan konumuna yerleşir.
- Binalar, katlar, odalar ve görünümler arasında geçiş yapınGeometriyi düzenlemek yerine bir proje içinde konum değiştirmek için gezinme araç çubuğunu kullanın.
- Raise an object above the floor in 3D room viewSwitch to the 3D room view, go inside the room, select the object and move it upward to raise it above the floor.
- Bir katın alt seviyesini ayarlamaBir katın alt kotunu Floor left menu bölümünden ayarlayın; böylece katın kapsamı doğru seviyeden başlar.
- Set up a floor's name, extent, tracing background and base in the floor menuOpen the Floor icon at the bottom left of the design portal to set the floor's name, extent, tracing background, floor base and export, and add Floor Outlines once the building has two or more floors.
- Switch between building, floor and room viewsSwitch between the building view and the floor view, and select a specific room to view.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.
- Work with building blocks, floor levels and rooms from the layoutCreate building blocks and floor levels in a project, then lay out a floor and define its rooms from that layout.
- Work with levels as real-world floorsLevels in Infurnia reflect real-world floors so you can model multi-floor projects.
- Bir paneli süpürgelik yerine zemine kadar uzatınYapı ayarlarındaki uzatma parametrelerini kullanarak bir panelin süpürgelik göstermek yerine zemine kadar devam etmesini sağlayın.
- Dolap yan panelleri zemine nasıl ulaşırDolap yan panellerinin zemine kadar tam boy nasıl indiğini ve ön süpürgelik için neden bir kesik yapıldığını öğrenin.
- Plan drawers, shutters and partitions before buildingSet shelf reveal, partition heights and shutter or drawer zones before customizing the internals.
- Montaj ayarları ve formüllerle panelleri zemine kadar uzatınGörünür bir paneli montaj ayarları üzerinden zemine kadar uzatın ve panel ölçülerini formüllerle yöneterek otomatik olarak uyum sağlamalarını sağlayın.
- Extend a cabinet end panel to the floor or ceilingExtend an end panel added from a cabinet's End Panel section downward to the floor or upward from its own panel using the Width Extension values.
- Bir tasarımı odalar, katlar ve binalar halinde düzenleyinTasarım alanının oda, kat ve bina düzeylerinde nasıl düzenlendiğini öğrenin ve bir evin birden fazla katı olduğunda katlar oluşturun.
- Duvarları ve kat planlarını kat seviyesinde çizinDuvarların ve kat planlarının hangi seviyede çizilmesi gerektiğini ve iç mekân çalışmalarında hangi seviyeler arasında geçiş yapacağınızı öğrenin.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Fabrika ve teklif filtrelerinin çalışması için odaları ve katları adlandırınFabrika ve teklif filtrelerinin çalışması için bir projeyi oluştururken binalarını, katlarını ve odalarını tanımlayın.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- Zemin arka planı olarak eklenen bir DWG veya ölçeklenmiş görsel üzerinde duvarları çizinZemin çizim arka planı olarak bir DWG dosyası veya ölçeklenmiş bir görsel ekleyin, ardından mimari duvar araçlarıyla üzerinde duvarları çizin.
- Upload DWG files or images as tracing backgrounds in floor settingsUpload a DWG file or an image in floor settings to use it as a tracing background.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.