층, 건물 및 참조 레벨
가이드: 31
- 층을 DWG로 내보내는 방법파일 유형과 AutoCAD 릴리스를 선택하고 다운로드하여 디자인의 층을 AutoCAD로 내보냅니다.
- 건물의 모든 층을 함께 보기건물 레벨로 전환하고 3D 보기를 열어 건물의 모든 층을 한 번에 확인하세요.
- Use drops as a floor drop or backsplash and raise the countertopSet a drop's height and shift so it reaches the floor, covers the tiling, or lifts the countertop to the required level.
- Add a building with New Blank Building or Copy BuildingOpen the buildings dropdown's '+ Add Building' panel to create a new blank building or copy an existing one, then manage buildings from the world menu.
- Add a new floor by copying or starting blankAdd another storey from the current floor level using the add-floor option.
- Add a reference level in an elevation viewOpen an elevation view and place a reference level at the height you want, then rename it or change its elevation.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- 객체를 다른 층의 같은 위치에 복사객체를 복사하여 하나 이상의 다른 층에 붙여넣으면 해당 층의 같은 평면 위치에 배치됩니다.
- 건물, 층, 방 및 보기 간 이동형상을 편집하는 대신 탐색 도구 모음을 사용하여 프로젝트 내에서 위치를 이동하세요.
- Raise an object above the floor in 3D room viewSwitch to the 3D room view, go inside the room, select the object and move it upward to raise it above the floor.
- 층의 하단 레벨 설정Floor left menu에서 층의 하단 표고를 설정하여 범위가 올바른 레벨에서 시작되도록 하십시오.
- Set up a floor's name, extent, tracing background and base in the floor menuOpen the Floor icon at the bottom left of the design portal to set the floor's name, extent, tracing background, floor base and export, and add Floor Outlines once the building has two or more floors.
- Switch between building, floor and room viewsSwitch between the building view and the floor view, and select a specific room to view.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.
- Work with building blocks, floor levels and rooms from the layoutCreate building blocks and floor levels in a project, then lay out a floor and define its rooms from that layout.
- Work with levels as real-world floorsLevels in Infurnia reflect real-world floors so you can model multi-floor projects.
- 걸레받이 대신 패널을 바닥까지 연장하기구성 설정의 연장 매개변수를 사용하면 걸레받이가 보이는 대신 패널이 바닥까지 이어지게 할 수 있습니다.
- 옷장 옆판이 바닥까지 닿는 방식옷장 옆판이 바닥까지 전체 길이로 이어지는 방식과 앞 걸레받이를 위해 컷아웃을 만드는 이유를 알아보세요.
- Plan drawers, shutters and partitions before buildingSet shelf reveal, partition heights and shutter or drawer zones before customizing the internals.
- 공사 설정과 수식을 사용하여 패널을 바닥까지 연장공사 설정을 통해 보이는 패널을 바닥까지 연장하고, 수식으로 패널 치수를 제어하여 자동으로 조정되도록 합니다.
- Extend a cabinet end panel to the floor or ceilingExtend an end panel added from a cabinet's End Panel section downward to the floor or upward from its own panel using the Width Extension values.
- 디자인을 방, 층, 건물로 구성하기디자인 공간이 방, 층, 건물 수준으로 어떻게 구성되는지 알아보고, 주택에 여러 층이 있을 때 층을 생성하세요.
- 바닥 레벨에서 벽과 평면도를 그립니다벽과 평면도를 어느 레벨에서 그려야 하는지, 그리고 인테리어 작업 시 어떤 레벨 사이를 이동하는지 알아봅니다.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- 공장 및 견적 필터가 작동하도록 방과 층의 이름을 지정하세요프로젝트를 생성할 때 건물, 층, 방을 정의하면 공장 및 견적 필터가 작동합니다.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- 바닥 배경으로 추가한 DWG 또는 축척이 지정된 이미지 위에 벽을 그립니다DWG 파일 또는 축척이 지정된 이미지를 바닥 그리기 배경으로 추가한 다음, 건축 벽 도구로 그 위에 벽을 그립니다.
- Upload DWG files or images as tracing backgrounds in floor settingsUpload a DWG file or an image in floor settings to use it as a tracing background.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.