Этажи, здания и опорные уровни
Руководства: 31
- Как экспортировать этаж в DWGЭкспортируйте этаж из вашего проекта в AutoCAD: выберите тип файла и версию AutoCAD и скачайте файл.
- Смотрите все этажи здания вместеПереключитесь на уровень здания и откройте 3D-вид, чтобы увидеть все этажи здания сразу.
- Use drops as a floor drop or backsplash and raise the countertopSet a drop's height and shift so it reaches the floor, covers the tiling, or lifts the countertop to the required level.
- Add a building with New Blank Building or Copy BuildingOpen the buildings dropdown's '+ Add Building' panel to create a new blank building or copy an existing one, then manage buildings from the world menu.
- Add a new floor by copying or starting blankAdd another storey from the current floor level using the add-floor option.
- Add a reference level in an elevation viewOpen an elevation view and place a reference level at the height you want, then rename it or change its elevation.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- Копирование объекта в ту же позицию на другом этажеСкопируйте объект и вставьте его на один или несколько других этажей, чтобы он оказался там в той же позиции на плане.
- Перемещение между зданиями, этажами, помещениями и видамиИспользуйте панель навигации, чтобы перемещаться по проекту, а не редактировать геометрию.
- Raise an object above the floor in 3D room viewSwitch to the 3D room view, go inside the room, select the object and move it upward to raise it above the floor.
- Задание нижнего уровня этажаЗадайте нижнюю отметку этажа в разделе Floor left menu, чтобы его границы начинались на нужном уровне.
- Set up a floor's name, extent, tracing background and base in the floor menuOpen the Floor icon at the bottom left of the design portal to set the floor's name, extent, tracing background, floor base and export, and add Floor Outlines once the building has two or more floors.
- Switch between building, floor and room viewsSwitch between the building view and the floor view, and select a specific room to view.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.
- Work with building blocks, floor levels and rooms from the layoutCreate building blocks and floor levels in a project, then lay out a floor and define its rooms from that layout.
- Work with levels as real-world floorsLevels in Infurnia reflect real-world floors so you can model multi-floor projects.
- Продлить панель до пола вместо цоколяЧтобы панель доходила до пола, а не показывала цоколь, используйте параметры удлинения в настройках конструкции.
- Как боковые панели шкафа доходят до полаУзнайте, как боковые панели шкафа проходят на всю длину до пола и почему для переднего плинтуса делается вырез.
- Plan drawers, shutters and partitions before buildingSet shelf reveal, partition heights and shutter or drawer zones before customizing the internals.
- Удлинение панелей до пола с помощью настроек конструкции и формулУдлините видимую панель до пола через настройки её конструкции и задайте размеры панелей формулами, чтобы они подстраивались автоматически.
- Удлинение боковой панели шкафа до пола или потолкаУдлините боковую панель, добавленную из раздела End Panel шкафа, вниз до пола или вверх от её собственной панели с помощью значений Width Extension.
- Организация проекта по комнатам, этажам и зданиямУзнайте, как пространство проекта организовано на уровнях комнаты, этажа и здания, и создавайте этажи, если в доме несколько уровней.
- Рисование стен и планов этажей на уровне полаУзнайте, на каком уровне нужно рисовать стены и планы этажей и между какими уровнями вы перемещаетесь при работе с интерьером.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Задайте названия помещений и этажей, чтобы работали фильтры производства и расчёта стоимостиПри создании проекта определите его здания, этажи и помещения, чтобы работали фильтры производства и расчёта стоимости.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- Обводка стен по DWG или масштабированному изображению, добавленному в качестве фона планаДобавьте файл DWG или масштабированное изображение в качестве фона для обводки плана, затем обведите стены поверх него с помощью инструментов для архитектурных стен.
- Upload DWG files or images as tracing backgrounds in floor settingsUpload a DWG file or an image in floor settings to use it as a tracing background.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.