നിലകൾ, കെട്ടിടങ്ങൾ, റഫറൻസ് ലെവലുകൾ
ഗൈഡുകൾ: 31
- ഒരു ഫ്ലോർ DWG ആയി എക്സ്പോർട്ട് ചെയ്യുന്നതെങ്ങനെഫയൽ തരവും AutoCAD റിലീസും തിരഞ്ഞെടുത്ത് ഡൗൺലോഡ് ചെയ്ത്, നിങ്ങളുടെ ഡിസൈനിൽ നിന്ന് ഒരു ഫ്ലോർ AutoCAD-ലേക്ക് എക്സ്പോർട്ട് ചെയ്യുക.
- ഒരു കെട്ടിടത്തിന്റെ എല്ലാ നിലകളും ഒരുമിച്ച് കാണുകഒരു കെട്ടിടത്തിന്റെ എല്ലാ നിലകളും ഒരുമിച്ച് കാണാൻ building level-ലേക്ക് മാറി 3D view തുറക്കുക.
- ഡ്രോപ്പുകൾ ഫ്ലോർ ഡ്രോപ്പ് ആയോ ബാക്ക്സ്പ്ലാഷ് ആയോ ഉപയോഗിച്ച് കൗണ്ടർടോപ്പ് ഉയർത്തുകഒരു ഡ്രോപ്പിന്റെ ഉയരവും ഷിഫ്റ്റും സെറ്റ് ചെയ്യുക, അത് തറയിൽ എത്തുകയോ ടൈലിംഗ് മൂടുകയോ ആവശ്യമായ നിലയിലേക്ക് കൗണ്ടർടോപ്പ് ഉയർത്തുകയോ ചെയ്യാൻ.
- Add a building with New Blank Building or Copy BuildingOpen the buildings dropdown's '+ Add Building' panel to create a new blank building or copy an existing one, then manage buildings from the world menu.
- Add a new floor by copying or starting blankAdd another storey from the current floor level using the add-floor option.
- Add a reference level in an elevation viewOpen an elevation view and place a reference level at the height you want, then rename it or change its elevation.
- Copy a floor with its rooms and unitsDuplicate an existing floor so its rooms, names and units carry over to a new floor level.
- ഒരു ഒബ്ജക്റ്റ് മറ്റൊരു നിലയിലെ അതേ സ്ഥാനത്തേക്ക് പകർത്തുകഒരു ഒബ്ജക്റ്റ് പകർത്തി ഒന്നോ അതിലധികമോ മറ്റ് നിലകളിൽ പേസ്റ്റ് ചെയ്യുക, അങ്ങനെ അത് അവിടെ അതേ പ്ലാൻ സ്ഥാനത്ത് എത്തും.
- കെട്ടിടങ്ങൾ, നിലകൾ, മുറികൾ, കാഴ്ചകൾ എന്നിവയ്ക്കിടയിൽ നീങ്ങുകജ്യാമിതി തിരുത്തുന്നതിനുപകരം ഒരു പ്രോജക്ടിനുള്ളിൽ സ്ഥാനം മാറ്റാൻ navigation toolbar ഉപയോഗിക്കുക.
- Raise an object above the floor in 3D room viewSwitch to the 3D room view, go inside the room, select the object and move it upward to raise it above the floor.
- ഒരു നിലയുടെ താഴത്തെ നിരപ്പ് സജ്ജമാക്കുകFloor left menu-ൽ നിന്ന് ഒരു നിലയുടെ താഴത്തെ ഉയരം സജ്ജമാക്കുക, അതുവഴി അതിന്റെ വ്യാപ്തി ശരിയായ നിരപ്പിൽ ആരംഭിക്കും.
- Set up a floor's name, extent, tracing background and base in the floor menuOpen the Floor icon at the bottom left of the design portal to set the floor's name, extent, tracing background, floor base and export, and add Floor Outlines once the building has two or more floors.
- Switch between building, floor and room viewsSwitch between the building view and the floor view, and select a specific room to view.
- Use a floor reference to trace uploaded images or DWG dimensionsUpload an image or DWG dimensions and use them as a background reference for tracing within the design.
- Work with building blocks, floor levels and rooms from the layoutCreate building blocks and floor levels in a project, then lay out a floor and define its rooms from that layout.
- Work with levels as real-world floorsLevels in Infurnia reflect real-world floors so you can model multi-floor projects.
- സ്കർട്ടിംഗിന് പകരം ഒരു പാനൽ തറ വരെ നീട്ടുകഒരു പാനലിന്റെ construction ക്രമീകരണങ്ങളിലെ extension പാരാമീറ്ററുകൾ ഉപയോഗിച്ച്, സ്കർട്ടിംഗ് കാണിക്കുന്നതിന് പകരം അത് തറ വരെ തുടരാൻ ചെയ്യുക.
- വാർഡ്രോബിന്റെ സൈഡ് പാനലുകൾ തറയിൽ എത്തുന്നത് എങ്ങനെവാർഡ്രോബിന്റെ സൈഡ് പാനലുകൾ പൂർണ്ണ നീളത്തിൽ തറയിൽ എത്തുന്നതും മുൻവശത്തെ സ്കർട്ടിംഗിനായി ഒരു കട്ടൗട്ട് എന്തിന് നിർമ്മിക്കുന്നു എന്നതും അറിയുക.
- നിർമ്മാണത്തിന് മുൻപ് ഡ്രോയറുകൾ, ഷട്ടറുകൾ, പാർട്ടീഷനുകൾ എന്നിവ പ്ലാൻ ചെയ്യുകഇന്റേണലുകൾ കസ്റ്റമൈസ് ചെയ്യുന്നതിന് മുൻപ് ഷെൽഫ് റിവീൽ, പാർട്ടീഷൻ ഉയരങ്ങൾ, ഷട്ടർ അല്ലെങ്കിൽ ഡ്രോയർ സോണുകൾ എന്നിവ സെറ്റ് ചെയ്യുക.
- നിർമ്മാണ ക്രമീകരണങ്ങളും ഫോർമുലകളും ഉപയോഗിച്ച് പാനലുകൾ തറവരെ നീട്ടുകഒരു ദൃശ്യമായ പാനൽ അതിന്റെ നിർമ്മാണ ക്രമീകരണങ്ങളിലൂടെ തറവരെ നീട്ടുക, ഫോർമുലകൾ ഉപയോഗിച്ച് പാനൽ വലുപ്പങ്ങൾ നിയന്ത്രിച്ച് അവ സ്വയമേവ ക്രമീകരിക്കപ്പെടുന്നതാക്കുക.
- ഒരു കാബിനറ്റിന്റെ എൻഡ് പാനൽ തറയിലേക്കോ സീലിംഗിലേക്കോ നീട്ടുകഒരു കാബിനറ്റിന്റെ End Panel വിഭാഗത്തിൽ നിന്ന് ചേർത്ത എൻഡ് പാനൽ, Width Extension മൂല്യങ്ങൾ ഉപയോഗിച്ച് താഴേക്ക് തറയിലേക്കോ അതിന്റെ സ്വന്തം പാനലിൽ നിന്ന് മുകളിലേക്കോ നീട്ടുക.
- ഒരു ഡിസൈൻ മുറികൾ, നിലകൾ, കെട്ടിടങ്ങൾ എന്നിവയായി ക്രമീകരിക്കുകഡിസൈൻ സ്പേസ് മുറി, നില, കെട്ടിടം എന്നീ തലങ്ങളായി എങ്ങനെ ക്രമീകരിക്കുന്നു എന്ന് അറിയുക, ഒരു വീട്ടിൽ ഒന്നിലധികം നിലകളുള്ളപ്പോൾ നിലകൾ സൃഷ്ടിക്കുക.
- തറ നിലയിൽ ഭിത്തികളും ഫ്ലോർ പ്ലാനുകളും വരയ്ക്കുകഏത് നിലയിലാണ് ഭിത്തികളും ഫ്ലോർ പ്ലാനുകളും വരയ്ക്കേണ്ടതെന്നും, ഇന്റീരിയർ ജോലിക്കായി ഏതൊക്കെ നിലകൾക്കിടയിൽ നിങ്ങൾ മാറുന്നുവെന്നും അറിയുക.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- ഫാക്ടറി, ക്വൊട്ടേഷൻ ഫിൽട്ടറുകൾ പ്രവർത്തിക്കാൻ റൂമുകൾക്കും ഫ്ലോറുകൾക്കും പേരുകൾ നൽകുകഒരു പ്രോജക്ട് സൃഷ്ടിക്കുമ്പോൾ അതിന്റെ കെട്ടിടങ്ങളും ഫ്ലോറുകളും റൂമുകളും നിർവചിക്കുക, അങ്ങനെ ഫാക്ടറി, ക്വൊട്ടേഷൻ ഫിൽട്ടറുകൾ പ്രവർത്തിക്കും.
- Set slab elevation from the ground floorPlace a slab at the height you want above the ground floor using the Elevation field in the slab tool.
- Set wall unit height from floor via Y positionPlace a wall unit at a standard height by setting its Y-axis value to the unit's bottom height above finished floor level plus the tile offset.
- ഫ്ലോർ പശ്ചാത്തലമായി ചേർത്ത DWG അല്ലെങ്കിൽ സ്കെയിൽ ചെയ്ത ചിത്രത്തിന് മുകളിലൂടെ ഭിത്തികൾ ട്രേസ് ചെയ്യുകഫ്ലോർ ട്രേസിംഗ് പശ്ചാത്തലമായി DWG ഫയലോ സ്കെയിൽ ചെയ്ത ചിത്രമോ ചേർക്കുക, തുടർന്ന് ആർക്കിടെക്ചറൽ wall tools ഉപയോഗിച്ച് അതിന് മുകളിലൂടെ ഭിത്തികൾ ട്രേസ് ചെയ്യുക.
- Upload DWG files or images as tracing backgrounds in floor settingsUpload a DWG file or an image in floor settings to use it as a tracing background.
- Why base units sit 12 mm above the floorBase units are placed with a default Y position of 12 mm so floor tiles can be added later without shifting each unit up.