材料、饰面和封边条
指南:107
- 在Materials > Edgeband下按角色选择柜体封边条在Materials > Edgeband下按角色选择每条封边条,并设置Edgeband Linking,使柜体和门板跟随Internal Finish或External Finish。
- 一次性为多个单元应用芯材和材质更改使用批量编辑、组选择和通用属性,一次性更改多个柜体和衣柜的材质。
- 在应用饰面之前为板材设置封边条在目录中创建封边条条目,为每块板材或门板逐边指定封边条,并在板材级设置中更改单条边的饰面。
- 了解预贴面与后贴面芯板如何锁定饰面侧了解芯板 SKU 的贴面类型如何决定哪些板材饰面可以编辑,哪些由目录捆绑提供。
- Control ply, finish and edge bands with shutter design ply finish displaySet the 'ply finish display' property on a shutter design SKU to decide what the underlying panel contributes and how its finish and edge bands behave.
- 从design portal应用封边条从design portal为您的柜体应用封边条。
- 为柜体的每块板件应用同一条封边条在柜体层级添加封边条,使其应用到该柜体的每块板件。
- 创建构造样式,为各板材统一应用相同的封边条创建构造样式,使相同的封边条应用于不同板材,然后按构件进行微调。
- 使用下拉菜单中的复用选项为多个柜体部件应用饰面从库中更改柜体的饰面,然后通过下拉菜单将同一饰面复用到其他部件,如柜体外部和柜体内部。
- 从轮播中选择芯材和厚度并应用从轮播中选择芯材及其厚度,并将更改应用到您的单元。
- 将已使用的材质应用到另一个元素使用材质选择器或材质下拉菜单,将设计中已有的材质复用到另一个元素上。
- 从全屋按钮目录应用饰面从全屋目录中为单元的柜门或柜体槽位选择饰面,并通过色板应用。
- 通过Meshes and Materials更改3D对象的材质为选中的3D对象打开Meshes and Materials,将其材质切换为所需饰面的防火板。
- 在柜体板件自身的层级上设置饰面和层板选项打开柜体板件自身的层级,选择其外饰面和内饰面的来源,为该板件单独选择自定义饰面,并设置层板的类型和可见性。
- 使用Rich View在立面图上显示材料颜色将立面图切换为Rich View,使柜体显示其实际应用的材料。
- 在设计偏好中配置材料和柜体偏好在设计应用内的设计偏好中设置材料和配置偏好。
- Edit Panel Design 中切割形状的封边和材料了解 Edit Panel Design 中的切割形状如何带有封边,并采用材料以实现预期的饰面。
- 将饰面材料关联到具有内部和外部饰面的柜体在饰面材料属性中关联柜体的外部和内部饰面材料,即可为柜体应用饰面。
- 从PU门板和内部抽屉移除封边条从PU门板或内部抽屉移除已映射的封边条,使这些部件上不再显示封边。
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Assign materials by searching subcategory in the material panelOpen the material or properties panel and select a material to apply it to the selected geometry.
- Change a core from QC mode's Core Materials selectorPick a core from QC mode's Core Materials selector and confirm the change by its toast, then close the core carousel left open at the bottom of the screen.
- Change a material colour via carousel, used-materials dropdown or pickerPick a colour from the carousel, switch between laminate and veneer categories, or reuse a colour already in the design from the used-materials dropdown.
- Change core and finish materials from the properties panelChange core and finish materials from the properties panel.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change finishes in QC mode and see them in the 3D viewReplace a finish while in QC mode and the 3D view stays in sync with your change.
- Check edge bands and finishes in the material listReview edge bands for shutters and carcass in the material list.
- Find every material used or tried in the designOpen the drop-down on the first line of the third bottom-left panel button to see every material used or tried in the design.
- How finish categories control shutter and carcass surfacesLearn how the four finish categories decide which panel surface a finish is applied to and why choosing correctly matters.
- Override a material colour in design using RGB valuesChange a material's colour for a single design without editing the catalogue by entering RGB values in the texture dropdown.
- 旋转板材上的饰面纹理方向在板材的 material 区域中,可将板材表面的三聚氰胺饰面纹理旋转 0、90、180 或 270 度。
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set External finish source to shutter external finishSet the External finish source to the shutter external finish so a thick shutter core gets its finish from the right place.
- Set external finish equal to internal in construction styleLink the external finish to the internal finish in a construction style so both stay the same.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Use a finish row's three-dot menu and apply material changes to all instancesOpen a finish row's three-dot menu to clone a material, open Material Settings or reset to default, and see the change on every unit using that finish.
- Use the house button to see the full material catalogueOpen the material or finish picker through the house button so you can reach every available option.
- 将柜体、侧板和封边饰面与门板匹配分别设置柜体和侧板的饰面,并让封边跟随门板的可见封边设置。
- 插入滑动门板系统并为面板应用外部饰面通过插入滑动门板系统、自定义面板设计选项并为面板应用外部饰面,完成衣柜。
- 在板件层级将门板的芯材改为玻璃将门板的芯材切换为普通玻璃等自定义材料,并通过所选芯材设置玻璃厚度。
- 通过管理选项卡更改柜体芯材在管理选项卡中更新柜体或转角单元的芯材,并确认设置,使更改应用到所选单元。
- 设置柜体级别的门板和柜体饰面及芯材在属性面板中选择门板和柜体饰面以及芯材,使继承的门板跟随柜体。
- 通过Change Materials更改柜体的饰面、芯材和封边条先使用Change Materials更改柜体的饰面和芯材,然后更改其封边条。
- 更改单个柜体的柜身饰面在柜体层级更改柜身饰面,可同时更新所选柜体的所有柜身板件,且不影响同类型的其他柜体。
- 分别配置门板和柜体的材料厚度与饰面分别设置柜体和门板的芯材与饰面,使每个部件各自保留自己的选择。
- 通过可见封边设置控制门板边缘可见性设置门板可见封边值,以确定门板上显示哪条封边。
- 了解柜体板件材料与关联饰面查看柜体“材料”下每个子选项卡包含的内容,以及关联饰面和型材如何自动更改封边条和饰面。
- 在柜体层级更改门板颜色,在板件层级更改板材饰面为整个柜体设置门板颜色,为单个板件设置外饰面。
- 批量生成多柜立面图并更改饰面打开柜体的2D Drawings,生成覆盖多个柜体的立面图,然后框选柜体,一次性更改它们的材料和饰面。
- 芯材如何决定板件厚度了解板件的厚度如何取决于您为其添加的芯材。
- Override a panel's inherited materialSwitch a panel property to custom so you can pick a different material for that panel alone.
- 移除门板型材或更改芯材在Shutter Profiles部分中从门板上移除型材,并在芯材子类别中切换门板芯材。
- 选择一个柜体,打开饰面和封边设置选择一个柜体以打开其属性面板,然后在材料下设置其饰面、背板芯材和封边。
- 设置门板和柜体的芯材与厚度为门板和柜体选择芯材,例如 BWP、BW 或 HDMR,并为每种材料指定厚度;背板默认使用 6 mm 标准材料。
- 使用 Replace 按钮更换台面饰面选择台面单元,然后从 Replace 列表中选择新选项,即可更改台面饰面。
- 使用自定义饰面和匹配属性将饰面复制到板上要为外部饰面由来源驱动的板应用特定饰面,请选择该板,打开外部饰面来源,然后选择自定义饰面。
- 向抽屉系统添加自定义板件,并将其映射为柜体材料在抽屉系统层级添加自定义板件,并在任意板件层级设置其材料,以将其映射为柜体材料。
- 更改柜体尺寸并了解材料类别在属性面板中调整柜体尺寸,并了解其材料的分组方式。
- 独立于柜门更改踢脚板饰面为带踢脚板的衣柜的踢脚板单独设置饰面,而不使用柜门的默认饰面。
- 外露板的饰面如何应用了解外露板默认如何获得饰面,以及如何让某块板呈现不同的外观。
- 将背板芯材与柜体芯材关联在柜体偏好设置中将每种背板芯材与其对应的柜体芯材关联,使背板芯材默认应用于所有柜体。
- 使用防火板实体更改台面和柜体材质通过修改台面并应用更改来确认材质更改。
- Change door model, finish and handlePick a door model from the carousel, then set its finish and handle from meshes and materials.
- 一次为多个单元更换拉手和材料将多个单元一起选中,使用 change material / interchange 控件,一次操作即可更换它们的饰面。
- 抽屉饰面如何继承柜体饰面了解抽屉饰面如何跟随柜体的内部饰面和外部饰面,直到您在抽屉系统层级明确更改它们。
- 如何设置和更改背板材料了解背板材料如何默认使用 6 毫米标准板材,以及当需要不同厚度或材料时如何更改。
- 将柜门和抽屉面板设为内部饰面,以保持外框可见将柜门设为内部饰面,抽屉面板设为外部饰面,使外框位于柜门表面之外。
- 通过Furnish > Panels添加自定义竖向面板并应用饰面板饰面选择材料和饰面,然后设置尺寸,即可创建自定义竖向面板。
- 在单个板件级别更改已关联的板件饰面在单个板件级别将板件标记为自定义,以便在此更改其已关联的饰面或封边。
- 通过材料选择器更改板件的芯材打开材料选择器,在页面上选择芯材,然后在板件层级设置板件角色。
- 从板件区段更改单块板件的材质选择一块板件,为它单独指定材质,与柜体级材质分开。
- 更改天花板瓷砖图案材质和填缝线颜色将瓷砖作为天花板图案材质应用,然后更改其填缝线的颜色。
- 从 Countertop 菜单更改台面材质和厚度选择台面材质并设置其厚度,可以跟随材质 SKU,也可以自行输入数值。
- 通过选择树或单元更改台面材料选择单元或使用选择树,然后选择子类别和具体材料或颜色,即可更改台面材料。
- 将铺贴材料从地砖改为墙砖在铺贴图案设置中,将应用于铺贴表面的材料从地砖切换为墙砖。
- 在属性中更改衣柜门板材料、封边、拉手和位置选择衣柜,在属性面板中更改其门板材料和饰面、封边、拉手以及拉手位置。
- 在质检模式中核对五金和材料在生产前,使用质检模式对照整个设计范围的原材料清单,核对每个单元的五金和材料。
- 选择柜体外部饰面和内部饰面选中柜体后,在柜体的属性面板中,分别从各自的材料选择器中选择柜体外部饰面和柜体内部饰面,内部选择器用于设置内部颜色。
- 如何设置柜体的材料属性柜体的材料属性通过多个独立字段设置,门板外表面饰面通常与其他部分分开选择。
- 如何为 16 mm HDMR 柜体选择背板材料了解将柜体设为 16 mm HDMR 后,如何自动应用 6 mm HDMR 背板。
- 将内部搁板设为固定,并设置柜门材料将柜体的内部搁板设为固定板,并从前方缩减 20 mm。
- 无需重新打开目录即可复用项目材料直接选择项目中已使用的饰面或材料,无需再次从目录中挑选。
- 在放置柜体前设置柜体芯材和背板材料的默认值在柜体级偏好设置中选择柜体芯材和背板芯材,这样新增柜体时会自动使用这些材料。
- 设置抽屉填充板宽度并匹配填充面板材料厚度为抽屉填充面板设置其专属的定制芯材,使其厚度与周围 25 mm 板材一致,从而加厚该填充面板。
- 了解板材的材质来源了解每块板材的芯材、饰面和封边如何根据板材的角色继承柜体级别的通道。
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- 通过墙面饰面材料添加壁纸或涂料从墙面的饰面材料选项中选择壁纸或涂料饰面,即可为墙面添加该饰面。
- 从铺贴属性更改瓷砖图案、尺寸、填缝和材质从已应用地板的铺贴属性中调整其布局图案、瓷砖尺寸、填缝线和瓷砖材质。
- Change tile size and material from the tile optionsSelect a tile to see its depth, then set its dimensions and apply a pattern or material at the scale you want.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Decide when to fix a panel's materialChoose between editing an existing panel and adding a new one, and keep custom materials to panels meant to stay fixed.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Find panels not following carcass materialSpot panels whose custom core material does not follow the carcass by looking for the custom core property under the core section.
- Fix a panel's internal finish that will not changeWhen a panel's internal finish will not change in any output, an automation rule may be overriding it.
- Fix skirting panels inheriting unexpected materialsWhen a skirting panel picks up the wrong material in every new design, check whether an admin skirting preference is overriding the component's configured inheritance.
- How exposed panels take shutter core and finishLearn what happens to a panel's core material, finish and board layout when you change it to an exposed panel.
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- Make a panel follow another finishLink a panel's finish slot to another finish so the panel inherits it and updates automatically when that finish changes.
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Set panel visibility and finish per panelSelect the correct panel before changing its finish, because visibility settings apply per panel.
- Set shutter and carcass core material and thickness from Quick AccessSet the shutter and carcass core material and its thickness from Quick Access.
- Set wall height, thickness and materialEnter wall height, thickness and material either in the wall tool settings before drawing or in the selected wall's properties panel afterwards.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.