素材、仕上げ、エッジバンド
ガイド:107
- Materials > Edgebandで役割ごとにキャビネットのエッジバンドを選択しますMaterials > Edgebandで各エッジバンドを役割ごとに選択し、Edgeband Linkingを設定して、キャーカスと扉がInternal FinishまたはExternal Finishに従うようにします。
- Apply core and material changes to several units at onceUse bulk edit, group selection and common properties to change materials across many cabinets and wardrobes in one go.
- 仕上げを適用する前にパネルにエッジバンドを設定しますカタログでエッジバンドの項目を作成し、各パネルまたは扉の辺ごとに割り当て、パネルレベルの設定から1つの辺の仕上げを変更します。
- プレラム芯材ボードとポストラム芯材ボードで仕上げ面がどう固定されるかを理解する芯材ボードのSKUのラミネーションタイプによって、編集できるパネルの仕上げと、カタログから紐付けられる仕上げがどう決まるかを学びます。
- シャッターのデザインの合板・仕上げ・エッジバンドの表示で、合板・仕上げ・エッジバンドを制御するシャッターデザインのSKUに'ply finish display'プロパティを設定して、下地のパネルが何を提供するか、またその仕上げとエッジバンドがどう動作するかを決めます。
- design portalからエッジバンドを適用しますdesign portalからキャビネットにエッジバンドを適用します。
- キャビネット内のすべてのパネルに1本のエッジバンドを適用するキャビネットレベルでエッジバンドを追加すると、そのキャビネット内のすべてのパネルに適用されます。
- パネル全体に同じエッジバンドを適用する構法スタイルを作成する構法スタイルを作成すると、異なるパネルにも同じエッジバンドが適用されます。その後、要素ごとに微調整できます。
- ドロップダウンの再利用オプションを使って、複数のキャビネット部品に仕上げを適用しますライブラリからキャビネットの仕上げを変更し、その同じ仕上げをドロップダウンから側板外部や側板内部などの他の部品に再利用します。
- カルーセルから芯材と厚みを変更して適用しますカルーセルから芯材とその厚みを選び、変更をユニットに適用します。
- 使用済みの素材を別の要素に適用するデザイン内で既に使用している素材を、素材ピッカーまたは素材ドロップダウンから別の要素に再利用できます。
- ハウスボタンのカタログから仕上げ材を適用するユニットの扉またはキャビネット本体のスロットに、ハウスカタログ全体から仕上げ材を選び、見本で適用します。
- Meshes and Materialsで3Dオブジェクトの素材を変更する選択した3DオブジェクトでMeshes and Materialsを開き、素材を希望の仕上げのメラミン化粧板に切り替えます。
- キャビネットパネル自体のレベルで仕上げと棚のオプションを設定するキャビネットパネル自体のレベルを開き、外面と内面の仕上げの取得元を選択し、そのパネルだけのカスタム仕上げを選び、棚の種類と表示/非表示を設定します。
- Rich Viewで立面図に素材の色を表示する立面図をRich Viewに切り替えると、キャビネットに適用されている実際の素材が表示されます。
- デザイン設定で素材とキャビネット本体の設定を行います素材と構成の設定は、デザイン設定のデザインアプリケーション内で行います。
- Edit Panel Designでのカット形状のエッジバンディングと素材Edit Panel Designのカット形状にエッジバンディングを付け、仕上げに応じた素材を設定する方法を説明します。
- キャビネットに内外装仕上げ材をリンクする仕上げ材のプロパティで外装仕上げ材と内装仕上げ材をリンクして、キャビネットに仕上げを適用します。
- PUシャッターと内部引き出しからエッジバンドを削除するPUシャッターまたは内部引き出しにマッピングされたエッジバンドを削除すると、それらの部品にエッジバインディングが表示されなくなります。
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Assign materials by searching subcategory in the material panelOpen the material or properties panel and select a material to apply it to the selected geometry.
- Change a core from QC mode's Core Materials selectorPick a core from QC mode's Core Materials selector and confirm the change by its toast, then close the core carousel left open at the bottom of the screen.
- Change a material colour via carousel, used-materials dropdown or pickerPick a colour from the carousel, switch between laminate and veneer categories, or reuse a colour already in the design from the used-materials dropdown.
- Change core and finish materials from the properties panelChange core and finish materials from the properties panel.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change finishes in QC mode and see them in the 3D viewReplace a finish while in QC mode and the 3D view stays in sync with your change.
- Check edge bands and finishes in the material listReview edge bands for shutters and carcass in the material list.
- Find every material used or tried in the designOpen the drop-down on the first line of the third bottom-left panel button to see every material used or tried in the design.
- How finish categories control shutter and carcass surfacesLearn how the four finish categories decide which panel surface a finish is applied to and why choosing correctly matters.
- Override a material colour in design using RGB valuesChange a material's colour for a single design without editing the catalogue by entering RGB values in the texture dropdown.
- パネルの仕上げ材の木目またはテクスチャを回転させるパネルの素材セクションから、パネル面のラミネートの木目またはテクスチャを0、90、180、270度に回転できます。
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set External finish source to shutter external finishSet the External finish source to the shutter external finish so a thick shutter core gets its finish from the right place.
- Set external finish equal to internal in construction styleLink the external finish to the internal finish in a construction style so both stay the same.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Use a finish row's three-dot menu and apply material changes to all instancesOpen a finish row's three-dot menu to clone a material, open Material Settings or reset to default, and see the change on every unit using that finish.
- Use the house button to see the full material catalogueOpen the material or finish picker through the house button so you can reach every available option.
- Match carcass, side panel and edge band finishes to the shutterSet the carcass and side panel finishes separately and make edge bands follow the shutter's visible edge band setting.
- 引き戸システムを挿入し、パネルに外部仕上げを適用する引き戸システムを挿入し、パネルのデザインオプションをカスタマイズし、パネルに外部仕上げを適用して、ワードローブを完成させます。
- パネルレベルで扉の芯材をガラスに変更する扉の芯材を、透明ガラスなどのカスタム材質に切り替え、選択した芯材でガラスの厚みを設定します。
- 管理タブでキャビネットの芯材を変更する管理タブからキャビネットまたはコーナーユニットの芯材を更新し、設定を確定すると、選択したユニットに変更が適用されます。
- キャビネット単位の扉とキャ carcass の仕上げ・芯材を設定するプロパティパネルで扉とキャ carcass の仕上げと芯材を選択すると、継承する扉はキャビネットに従います。
- Change Materialsからキャビネットの仕上げ材、芯材、エッジバンドを変更しますChange Materialsを使用して、まずキャビネットの仕上げ材と芯材を変更し、次にエッジバンドを変更します。
- 1台のキャビネットの本体仕上げを変更するキャビネット単位で本体仕上げを変更すると、選択したキャビネットの本体パネルがすべてまとめて更新され、同じ種類の他のキャビネットには影響しません。
- 扉とキャビネット本体の材料厚みと仕上げを個別に設定するキャビネット本体と扉の芯材と仕上げを個別に設定し、各構成部品がそれぞれの選択を保持するようにします。
- 表示されるエッジバンド設定で扉の見えるエッジの表示を制御します扉に表示されるエッジバンドを決めるには、扉の表示エッジバンドの値を設定します。
- キャビネットのパネル材質と連動する仕上げを理解するキャビネットのMaterials配下にある各サブタブの内容と、連動する仕上げやプロファイルがエッジバンドと仕上げを自動的に変更する仕組みを確認できます。
- キャビネットレベルで扉カラーを、パネルレベルでパネル仕上げを変更するキャビネット全体の扉カラーを設定し、個々のパネルの外装仕上げを設定します。
- 複数のキャビネットの展開図を生成し、仕上げを一括で変更するキャビネットの2D Drawingsを開いて複数のキャビネットを対象とした展開図を生成し、その後キャビネットをグループ選択して素材と仕上げを一度に変更します。
- 芯材によってパネルの厚みがどのように決まるかパネルの厚みが、追加した芯材によってどのように決まるかを学びます。
- パネルの継承された材質を上書きするパネルのプロパティをカスタムに切り替えると、そのパネルだけに別の材質を選択できます。
- シャッタープロファイルの削除または芯材の変更Shutter Profilesセクションでシャッターからプロファイルを外し、芯材サブカテゴリーでシャッターの芯材を切り替えます。
- 仕上げとエッジバンドの設定を開くには、キャビネットを選択してくださいキャビネットを選択してプロパティパネルを開き、Materials で仕上げ、背パネルの芯材、エッジバンドを設定します。
- 扉とキャビネット本体の芯材と厚さを設定する扉とキャビネット本体にはBWP、BW、HDMRなどの芯材を選択し、それぞれの厚さを指定します。背板は標準材6 mmが初期値です。
- Replaceボタンを使用してカウンター天板の仕上げを置き換えますカウンター天板の仕上げを変更するには、そのユニットを選択し、Replaceリストから新しいオプションを選びます。
- カスタム仕上げと一致プロパティを使用して、パネルに仕上げをコピーする外部仕上げがソース連動のパネルに特定の仕上げを適用するには、パネルを選択し、外部仕上げソースを開いて、カスタム仕上げを選択します。
- Add custom panels to a drawer system and map them as carcass materialAdd custom panels at the drawer system level and set their material at any panel level to map them as carcass material.
- キャビネットのサイズを変更し、材料カテゴリを理解するプロパティパネルでキャビネットのサイズを変更し、その材料がどのようにグループ化されているかを確認します。
- シャッターとは別に幅木の仕上げを変更する幅木付きワードローブの幅木に、シャッターの既定の仕上げではなく独自の仕上げを設定します。
- 露出パネルの仕上げが適用される仕組み露出パネルに既定で仕上げがどのように適用されるか、また別の見た目にする方法を説明します。
- 背板の芯材をキャビネット本体の芯材にリンクするキャビネット設定で各背板の芯材を対応するキャビネット本体の芯材にリンクすると、背板の芯材がすべてのキャビネットに既定で適用されます。
- ラミネート無垢材を使用してカウンター天板とキャビネットの素材を変更するカウンター天板を変更し、変更を適用して素材の変更を確定します。
- 扉のモデル、仕上げ、取っ手を変更するカルーセルから扉のモデルを選び、メッシュとマテリアルから仕上げと取っ手を設定します。
- 複数のユニットの取っ手と素材を一度に変更する複数のユニットをまとめて選択し、change material / interchange コントロールで仕上げを一度に差し替えます。
- 引き出しの仕上げがキャビネット本体の仕上げを継承する仕組み引き出しシステムのレベルで明示的に変更するまで、引き出しの仕上げがキャビネット本体の内側と外側の仕上げに従う仕組みを説明します。
- 背板の素材を設定・変更する方法背板の素材がデフォルトで6 mmの標準ボードになる仕組みと、異なる厚さや素材が必要な場合の変更方法を説明します。
- 扉と引き出しを内部仕上げに設定して、外枠が見えるようにします扉を内部仕上げに、引き出しの前板を外部仕上げに設定すると、外枠が扉の表面より外側に出ます。
- Furnish > Panelsからカスタム縦パネルを追加し、化粧板仕上げを適用します材料と仕上げを選び、寸法を設定してカスタム縦パネルを作成します。
- 個々のパネル単位でリンクされたパネルの仕上げを変更する個々のパネル単位でパネルをカスタムとしてマークすると、そこでリンクされた仕上げやエッジバンドを変更できます。
- マテリアルピッカーでパネルの芯材を変更するマテリアルピッカーを開き、ページで芯材を選択してから、パネルレベルでパネルの役割を設定します。
- パネルセクションから1枚のパネルの素材を変更する1枚のパネルを選択し、キャビネット単位の素材とは別に、そのパネル独自の素材を設定します。
- 天井タイル柄の素材と目地ラインの色を変更するタイルを天井柄の素材として適用し、その目地ラインの色を変更します。
- Countertopメニューから天板の素材と厚さを変更します天板の素材を選び、厚さを設定します。素材のSKUに従うか、値を自分で入力します。
- Change countertop material via selection tree or unitChange a countertop's material by selecting the unit or using the selection tree, then choosing a subcategory and a specific material or colour.
- タイル貼りの素材を床タイルから壁タイルに変更するタイル貼りパターン設定で、タイル貼りした面に適用する素材を床タイルから壁タイルに切り替えます。
- プロパティでワードローブの扉材質、エッジバンド、取っ手、配置を変更するワードローブを選択し、プロパティパネルから扉の材質と仕上げ、エッジバンド、取っ手、取っ手の配置を変更します。
- QCモードで金物と材料を確認するQCモードを使用して、生産前に各ユニットの金物と材料をデザイン全体の原材料リストと照合してください。
- キャビネット本体の外面仕上げと内面仕上げを選択するキャビネットを選択した後、キャビネットのプロパティパネルにあるそれぞれの素材ピッカーから、キャビネット本体の外面仕上げとキャビネット本体の内面仕上げを選択します。内面ピッカーでは内側の色を設定します。
- キャビネットの素材プロパティの設定方法キャビネットの素材プロパティは複数の個別のフィールドで設定し、扉の外装仕上げは通常、その他とは別に選択します。
- 16 mm HDMR のキャビネット躯体で背板の素材がどのように選ばれるかキャビネット躯体を 16 mm HDMR に設定すると、6 mm HDMR の背板が自動的に適用される仕組みを説明します。
- 内側棚を固定棚にして、扉材を設定するキャビネットの内側棚を固定棚として設定し、前面から20 mm減らします。
- カタログを再度開かずにプロジェクトの材料を再利用するプロジェクトですでに使用した仕上げ材または材料を、カタログから再度選ばずに直接選択できます。
- キャビネットを配置する前に、キャビネット本体の芯材と背板の材質の既定値を設定しますキャビネット単位の設定でキャビネット本体の芯材と背板の芯材を選択すると、新しいキャビネットはその材質で追加されます。
- 引き出しフィラーの幅を設定し、フィラーパネルの材料厚を合わせる引き出しフィラーパネルに専用のカスタム芯材を設定して厚くし、周囲の25 mmの板に合わせます。
- パネル素材の継承元を理解する各パネルの役割に基づき、パネルの芯材、仕上げ、エッジバンドがユニットレベルのチャネルからどのように継承されるかを確認します。
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- 壁仕上げ材で壁紙または塗装を追加する壁の仕上げ材オプションから選択して、壁に壁紙または塗装の仕上げを適用します。
- タイルのプロパティからタイルパターン、サイズ、目地、素材を変更する適用済みの床のタイルプロパティから、レイアウトパターン、タイル寸法、目地線、タイル素材を調整します。
- Change tile size and material from the tile optionsSelect a tile to see its depth, then set its dimensions and apply a pattern or material at the scale you want.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Decide when to fix a panel's materialChoose between editing an existing panel and adding a new one, and keep custom materials to panels meant to stay fixed.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Find panels not following carcass materialSpot panels whose custom core material does not follow the carcass by looking for the custom core property under the core section.
- Fix a panel's internal finish that will not changeWhen a panel's internal finish will not change in any output, an automation rule may be overriding it.
- Fix skirting panels inheriting unexpected materialsWhen a skirting panel picks up the wrong material in every new design, check whether an admin skirting preference is overriding the component's configured inheritance.
- How exposed panels take shutter core and finishLearn what happens to a panel's core material, finish and board layout when you change it to an exposed panel.
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- Make a panel follow another finishLink a panel's finish slot to another finish so the panel inherits it and updates automatically when that finish changes.
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Set panel visibility and finish per panelSelect the correct panel before changing its finish, because visibility settings apply per panel.
- Set shutter and carcass core material and thickness from Quick AccessSet the shutter and carcass core material and its thickness from Quick Access.
- Set wall height, thickness and materialEnter wall height, thickness and material either in the wall tool settings before drawing or in the selected wall's properties panel afterwards.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.