재질, 마감 및 엣지 밴드
가이드: 107
- Materials > Edgeband에서 역할별로 캐비닛 엣지 밴드를 선택하세요Materials > Edgeband에서 역할별로 각 엣지 밴드를 선택하고, Edgeband Linking을 설정하여 몸체와 도어가 Internal Finish 또는 External Finish을 따르도록 하세요.
- 여러 유닛의 코어와 재질 변경을 한 번에 적용일괄 편집, 그룹 선택, 공통 속성을 사용하면 여러 캐비닛과 붙박이장의 재질을 한 번에 변경할 수 있습니다.
- 마감재를 적용하기 전에 패널에 엣지 밴드를 설정하세요카탈로그에서 엣지 밴드 항목을 만들고, 각 패널 또는 셔터의 면별로 지정하며, 패널 수준 설정에서 한쪽 엣지의 마감재를 변경하세요.
- 코어 보드의 prelam 및 postlam이 마감면을 어떻게 고정하는지 이해합니다코어 보드 SKU의 라미네이션 유형이 편집할 수 있는 패널 마감과 카탈로그에서 함께 제공되는 마감을 어떻게 결정하는지 알아봅니다.
- 셔터 디자인 합판·마감·엣지밴드 표시로 합판, 마감, 엣지밴드 제어Set the 'ply finish display' property on a shutter design SKU to decide what the underlying panel contributes and how its finish and edge bands behave.
- design portal에서 엣지 밴드를 적용합니다.design portal에서 캐비닛에 엣지 밴드를 적용합니다.
- 캐비닛의 모든 패널에 엣지 밴드 하나를 적용합니다캐비닛 수준에서 엣지 밴드를 추가하면 해당 캐비닛의 모든 패널에 적용됩니다.
- 패널 전체에 동일한 엣지 밴드를 적용하려면 구성 스타일을 생성하세요서로 다른 패널에 동일한 엣지 밴드가 적용되도록 구성 스타일을 생성한 다음, 요소별로 세부 조정하세요.
- 드롭다운 재사용 옵션으로 여러 캐비닛 부품에 마감재를 적용하세요라이브러리에서 캐비닛의 마감재를 변경한 다음, 드롭다운을 통해 동일한 마감재를 몸체 외부와 몸체 내부 같은 다른 부품에 재사용하세요.
- 캐러셀에서 심재와 두께를 변경한 후 적용하세요.캐러셀에서 심재와 두께를 선택하고 유닛에 변경 사항을 적용하세요.
- 이미 사용한 재료를 다른 요소에 적용디자인에 이미 있는 재료를 재료 선택기 또는 재료 드롭다운에서 선택하여 다른 요소에 다시 사용할 수 있습니다.
- 하우스 버튼 카탈로그에서 마감재 적용전체 하우스 카탈로그에서 유닛의 셔터 또는 몸통 슬롯에 적용할 마감재를 골라 견본으로 적용하세요.
- Meshes and Materials을(를) 통해 3D 객체의 재질 변경선택한 3D 객체에 대해 Meshes and Materials을(를) 열고 재질을 원하는 마감의 라미네이트로 전환하세요.
- 캐비닛 패널 자체의 레벨에서 마감재와 선반 옵션 설정캐비닛 패널 자체의 레벨을 열어 외부 및 내부 마감재의 출처를 선택하고, 해당 패널에만 적용할 사용자 지정 마감재를 고르고, 선반의 유형과 표시 여부를 설정하십시오.
- Rich View로 입면도에 재료 색상을 표시합니다입면도를 Rich View로 전환하면 수납장에 적용된 실제 재료가 표시됩니다.
- 디자인 환경설정에서 자재 및 캐커스 기본 설정 구성디자인 애플리케이션의 디자인 환경설정에서 자재 및 구성 기본 설정을 지정하세요.
- Edit Panel Design의 재단 형상에 대한 엣지 밴딩 및 재료Edit Panel Design의 재단 형상에 엣지 밴딩을 적용하고 의도한 마감에 맞는 재료를 지정하는 방법을 알아보세요.
- 내부 및 외부 마감재를 캐비닛에 연결마감재 속성에서 외부 및 내부 마감재를 연결하여 캐비닛에 마감을 적용합니다.
- PU 셔터와 내부 서랍에서 엣지 밴드 제거PU 셔터 또는 내부 서랍에 매핑된 엣지 밴드를 제거하면 해당 부품에 엣지 바인딩이 더 이상 표시되지 않습니다.
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Assign materials by searching subcategory in the material panelOpen the material or properties panel and select a material to apply it to the selected geometry.
- Change a core from QC mode's Core Materials selectorPick a core from QC mode's Core Materials selector and confirm the change by its toast, then close the core carousel left open at the bottom of the screen.
- Change a material colour via carousel, used-materials dropdown or pickerPick a colour from the carousel, switch between laminate and veneer categories, or reuse a colour already in the design from the used-materials dropdown.
- Change core and finish materials from the properties panelChange core and finish materials from the properties panel.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change finishes in QC mode and see them in the 3D viewReplace a finish while in QC mode and the 3D view stays in sync with your change.
- Check edge bands and finishes in the material listReview edge bands for shutters and carcass in the material list.
- Find every material used or tried in the designOpen the drop-down on the first line of the third bottom-left panel button to see every material used or tried in the design.
- How finish categories control shutter and carcass surfacesLearn how the four finish categories decide which panel surface a finish is applied to and why choosing correctly matters.
- Override a material colour in design using RGB valuesChange a material's colour for a single design without editing the catalogue by entering RGB values in the texture dropdown.
- 패널의 마감 결 또는 질감 회전패널의 자재 섹션에서 패널 면의 라미네이트 결 또는 질감을 0, 90, 180 또는 270도 회전합니다.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set External finish source to shutter external finishSet the External finish source to the shutter external finish so a thick shutter core gets its finish from the right place.
- Set external finish equal to internal in construction styleLink the external finish to the internal finish in a construction style so both stay the same.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Use a finish row's three-dot menu and apply material changes to all instancesOpen a finish row's three-dot menu to clone a material, open Material Settings or reset to default, and see the change on every unit using that finish.
- Use the house button to see the full material catalogueOpen the material or finish picker through the house button so you can reach every available option.
- 캐커스, 측면 패널, 엣지 밴드 마감을 셔터에 맞추기캐커스와 측면 패널 마감을 각각 설정하고, 엣지 밴드가 셔터의 보이는 엣지 밴드 설정을 따르도록 하세요.
- 슬라이딩 셔터 시스템을 삽입하고 패널에 외부 마감재를 적용합니다슬라이딩 셔터 시스템을 삽입하고, 패널 디자인 옵션을 사용자 지정하고, 패널에 외부 마감재를 적용하여 옷장을 완성합니다.
- 패널 레벨에서 셔터의 심재를 유리로 변경셔터의 심재를 일반 유리와 같은 사용자 지정 재질로 전환하고, 선택한 심재를 통해 유리 두께를 설정합니다.
- 관리자 탭에서 캐비닛 심재 변경관리자 탭에서 캐비닛 또는 코너 유닛의 심재를 업데이트하고 설정을 확인하면 변경 사항이 선택한 유닛에 적용됩니다.
- 캐비닛 단위의 셔터와 몸통 마감 및 심재 설정속성 패널에서 셔터와 몸통 마감 및 심재를 선택하면 상속하는 셔터가 캐비닛을 따릅니다.
- Change Materials에서 캐비닛의 마감재, 심재, 엣지밴드를 변경하세요Change Materials을 사용하여 캐비닛의 마감재와 심재를 먼저 변경한 다음 엣지밴드를 변경하세요.
- 한 캐비닛의 몸체 마감 변경캐비닛 수준에서 몸체 마감을 변경하면 선택한 캐비닛의 모든 몸체 패널이 함께 업데이트되며, 같은 종류의 다른 캐비닛에는 영향을 주지 않습니다.
- 셔터와 몸통의 재료 두께 및 마감재를 각각 설정하세요몸통과 셔터의 심재와 마감재를 각각 독립적으로 설정하여 각 구성 요소가 자체 선택 사항을 갖도록 하세요.
- 보이는 엣지 밴드 설정으로 셔터 엣지 표시 여부를 제어합니다셔터에 표시할 엣지 밴드를 결정하려면 셔터 보이는 엣지 밴드 값을 설정하세요.
- 캐비닛 패널 소재와 연동 마감재 이해하기캐비닛의 Materials 아래 각 하위 탭에 무엇이 있는지, 연동 마감재와 프로파일이 엣지 밴드와 마감재를 어떻게 자동으로 변경하는지 확인하세요.
- 캐비닛 레벨에서 셔터 색상을, 패널 레벨에서 패널 마감을 변경캐비닛 전체의 셔터 색상과 개별 패널의 외부 마감을 설정합니다.
- 여러 캐비닛의 입면도를 생성하고 마감재를 일괄 변경캐비닛의 2D Drawings을(를) 열어 여러 캐비닛을 포함하는 입면도를 생성한 다음, 캐비닛을 그룹 선택하여 한 번에 재질과 마감재를 변경하세요.
- 패널 두께가 심재에 따라 결정되는 방식패널에 추가한 심재에 따라 패널 두께가 어떻게 결정되는지 알아보세요.
- 패널의 상속된 재질 재정의패널 속성을 사용자 지정으로 전환하면 해당 패널에만 다른 재질을 선택할 수 있습니다.
- 셔터 프로파일 제거 또는 코어 재료 변경Shutter Profiles 섹션에서 셔터의 프로파일을 제거하고, 코어 재료 하위 카테고리에서 셔터 코어 재료를 전환합니다.
- 마감재 및 엣지밴드 설정을 열려면 캐비닛을 선택하세요캐비닛을 선택하여 속성 패널을 연 다음, Materials에서 마감재, 뒷판 코어 및 엣지밴드를 설정하세요.
- 셔터와 캐커스의 심재와 두께 설정셔터와 캐커스에 BWP, BW, HDMR 등의 심재를 선택하고 각각의 두께를 지정하세요. 뒷판은 기본값으로 6 mm 표준 재질이 적용됩니다.
- Replace 버튼으로 상판 마감재 교체하기상판의 유닛을 선택하고 Replace 목록에서 새 옵션을 골라 상판의 마감재를 변경하세요.
- Use custom finish and match property to copy a finish onto a panelApply a specific finish to a panel whose external finish is source-driven by selecting the panel, opening external finish source and choosing custom finish.
- 서랍 시스템에 사용자 정의 패널을 추가하고 몸체 재질로 매핑하기서랍 시스템 수준에서 사용자 정의 패널을 추가하고, 패널 수준에서 재질을 설정하여 몸체 재질로 매핑하세요.
- 캐비닛 크기 변경 및 자재 카테고리 이해속성 패널에서 캐비닛 크기를 조정하고 자재가 어떻게 그룹화되는지 알아보세요.
- 셔터와 별도로 스커팅 마감 변경스커팅 옷장의 스커팅에 셔터의 기본값 대신 자체 마감을 지정합니다.
- 노출 패널 마감이 적용되는 방식노출 패널이 기본적으로 마감을 어떻게 갖는지, 그리고 다른 모양을 주는 방법을 알아보세요.
- 뒷판 심재를 몸통 심재에 연결캐비닛 환경설정에서 각 뒷판 심재를 이에 맞는 몸통 심재에 연결하면 모든 캐비닛에 뒷판 심재가 기본으로 적용됩니다.
- 라미네이트 솔리드를 사용하여 상판과 캐비닛 소재 변경상판을 수정하고 변경 사항을 적용하여 소재 변경을 확인하세요.
- 도어 모델, 마감재 및 손잡이 변경캐러셀에서 도어 모델을 선택한 다음 메시와 재질에서 마감재와 손잡이를 설정하세요.
- 여러 유닛의 손잡이와 재질을 한 번에 변경여러 유닛을 함께 선택하고 change material / interchange 컨트롤로 한 번의 작업으로 마감재를 교체하세요.
- 서랍 마감이 몸통 마감을 상속하는 방식서랍 시스템 수준에서 명시적으로 변경하기 전까지 서랍 마감이 몸통의 내부 및 외부 마감을 따르는 방식을 알아보세요.
- 뒷판 재질을 설정하고 변경하는 방법뒷판 재질이 기본적으로 6mm 표준 보드로 설정되는 방식과 다른 두께나 재질이 필요할 때 변경하는 방법을 알아보세요.
- 외부 프레임이 보이도록 셔터와 서랍을 내부 마감으로 설정셔터를 내부 마감으로, 서랍 전면을 외부 마감으로 설정하여 외부 프레임이 셔터 면 바깥에 오도록 하십시오.
- Furnish > Panels을(를) 통해 사용자 지정 수직 패널을 추가하고 라미네이트 마감을 적용하세요재질과 마감을 선택한 다음 치수를 설정하여 사용자 지정 수직 패널을 만드세요.
- 개별 패널 수준에서 연결된 패널 마감재 변경개별 패널 수준에서 패널을 사용자 지정으로 표시하면 해당 위치에서 연결된 마감재 또는 엣지 밴드를 변경할 수 있습니다.
- 재료 선택기에서 패널의 심재 변경재료 선택기를 열고 페이지에서 심재를 선택한 다음, 패널 수준에서 패널 역할을 설정하세요.
- 패널 섹션에서 단일 패널의 재질 변경패널 하나를 선택하고 캐비닛 수준 재질과 별도로 해당 패널만의 재질을 지정합니다.
- 천장 타일 패턴 재질과 줄눈선 색상 변경타일을 천장 패턴 재질로 적용한 다음 줄눈선의 색상을 변경하세요.
- Countertop 메뉴에서 상판 재질과 두께 변경상판 재질을 선택하고 두께를 설정하세요. 재질 SKU를 따르거나 값을 직접 입력할 수 있습니다.
- 선택 트리 또는 유닛을 통해 상판 재질 변경유닛을 선택하거나 선택 트리를 사용한 후 하위 카테고리와 특정 재질 또는 색상을 선택하여 상판의 재질을 변경합니다.
- 타일링 재료를 바닥 타일에서 벽 타일로 변경타일링 패턴 설정에서 타일링된 표면에 적용된 재료를 바닥 타일에서 벽 타일로 전환합니다.
- 속성에서 붙박이장 도어 재질, 엣지 밴드, 손잡이 및 배치 변경붙박이장을 선택하고 속성 패널에서 도어 재질과 마감, 엣지 밴드, 손잡이 및 손잡이 배치를 변경하세요.
- QC 모드에서 하드웨어와 자재 확인QC 모드를 사용하면 생산 전에 각 유닛의 하드웨어와 자재를 설계 전체 원자재 목록과 대조하여 확인할 수 있습니다.
- 몸통 외부 마감과 내부 마감 선택캐비닛을 선택한 뒤 캐비닛의 속성 패널에서 각각의 재질 선택기로 몸통 외부 마감과 몸통 내부 마감을 선택하세요. 내부 선택기는 내부 색상을 설정합니다.
- 캐비닛의 재질 속성을 설정하는 방법캐비닛의 재질 속성은 여러 개의 개별 필드를 통해 설정되며, 셔터 외부 마감은 일반적으로 나머지와 별도로 선택합니다.
- 16mm HDMR 몸통의 뒷판 재료가 선택되는 방식캐비닛 몸통을 16mm HDMR로 설정하면 6mm HDMR 뒷판이 자동으로 적용되는 방식을 알아보세요.
- 내부 선반을 고정 패널로 만들고 셔터 재질 설정캐비닛의 내부 선반을 고정 패널로 설정하고 앞면에서 20mm 줄입니다.
- 카탈로그를 다시 열지 않고 프로젝트 자재 재사용카탈로그에서 다시 선택하지 않고, 프로젝트에서 이미 사용한 마감재나 자재를 바로 선택하세요.
- 캐비닛을 배치하기 전에 몸통 코어와 뒷판 소재 기본값을 설정하세요캐비닛 수준 환경설정에서 몸통 코어와 뒷판 코어 소재를 선택하면 새 캐비닛이 해당 소재로 추가됩니다.
- 서랍 충전재 폭을 설정하고 충전 패널 재료 두께를 맞추세요서랍 충전 패널에 별도의 사용자 지정 심재를 지정하여 두껍게 만들어 주변의 25 mm 보드와 두께를 맞추세요.
- 패널 자재가 어디에서 오는지 이해합니다각 패널의 코어, 마감재, 엣지밴드가 패널의 역할에 따라 유닛 수준 채널에서 어떻게 상속되는지 확인합니다.
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- 벽 마감 재료로 벽지 또는 페인트 추가벽의 마감 재료 옵션에서 선택하여 벽에 벽지 또는 페인트 마감을 적용하세요.
- 타일링 속성에서 타일 패턴, 크기, 줄눈 및 재질 변경적용된 바닥의 타일링 속성에서 배치 패턴, 타일 치수, 줄눈선 및 타일 재질을 조정합니다.
- Change tile size and material from the tile optionsSelect a tile to see its depth, then set its dimensions and apply a pattern or material at the scale you want.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Decide when to fix a panel's materialChoose between editing an existing panel and adding a new one, and keep custom materials to panels meant to stay fixed.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Find panels not following carcass materialSpot panels whose custom core material does not follow the carcass by looking for the custom core property under the core section.
- Fix a panel's internal finish that will not changeWhen a panel's internal finish will not change in any output, an automation rule may be overriding it.
- Fix skirting panels inheriting unexpected materialsWhen a skirting panel picks up the wrong material in every new design, check whether an admin skirting preference is overriding the component's configured inheritance.
- How exposed panels take shutter core and finishLearn what happens to a panel's core material, finish and board layout when you change it to an exposed panel.
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- Make a panel follow another finishLink a panel's finish slot to another finish so the panel inherits it and updates automatically when that finish changes.
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Set panel visibility and finish per panelSelect the correct panel before changing its finish, because visibility settings apply per panel.
- Set shutter and carcass core material and thickness from Quick AccessSet the shutter and carcass core material and its thickness from Quick Access.
- Set wall height, thickness and materialEnter wall height, thickness and material either in the wall tool settings before drawing or in the selected wall's properties panel afterwards.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.