Materials, finishes and edge bands
Guides: 107
- Choose cabinet edge bands by role under Materials > EdgebandPick each edge band by its role under Materials > Edgeband and set Edgeband Linking so the carcass and shutters follow the Internal Finish or the External Finish.
- Apply core and material changes to several units at onceUse bulk edit, group selection and common properties to change materials across many cabinets and wardrobes in one go.
- Set edge bands on panels before applying finishesCreate edge band entries in the catalogue, assign them per side on each panel or shutter, and change the finish on a single edge from panel level settings.
- Understand how prelam and postlam core boards lock finish sidesLearn how a core board SKU's lamination type decides which panel finishes you can edit and which are bundled from the catalog.
- Control ply, finish and edge bands with shutter design ply finish displaySet the 'ply finish display' property on a shutter design SKU to decide what the underlying panel contributes and how its finish and edge bands behave.
- Apply edge bands from the design portalApply edge bands to your cabinets from the design portal.
- Apply one edge band to every panel in a cabinetAdd an edge band at the cabinet level so it is applied to every panel in that cabinet.
- Create a construction style to apply the same edge band across panelsCreate a construction style so the same edge band applies across different panels, then fine-tune it per element.
- Apply a finish to multiple cabinet parts using the dropdown reuse optionChange a cabinet's finish from the library, then reuse that same finish on other parts like carcass external and carcass internal through the dropdown.
- Change core material and thickness from the carousel and applyPick a core material and its thickness from the carousel and apply the change to your unit.
- Apply an already-used material to another elementReuse a material already in your design on another element, either with the material picker or from the material dropdown.
- Apply finishes from the house button catalogPick a finish for a unit's shutter or carcass slot from the full house catalog and apply it with a swatch.
- Change a 3D object's material via Meshes and MaterialsOpen Meshes and Materials for a selected 3D object and switch its material to laminate with the finish you want.
- Set finishes and shelf options on a cabinet panel's own levelOpen a cabinet panel's own level to choose where its external and internal finishes come from, pick a custom finish for that panel alone, and set a shelf's type and visibility.
- Show material colours on elevations with Rich ViewSwitch an elevation to Rich View so the cabinets display the actual materials applied to them.
- Configure material and carcass preferences in design preferencesSet material and configuration preferences inside the design application under design preferences.
- Edge banding and materials for cut shapes in Edit Panel DesignLearn how cut shapes in Edit Panel Design can carry edge banding and take a material for the intended finish.
- Link finish material to cabinet with internal and external finishesApply finishes to a cabinet by linking its external and internal finish materials in the finish material properties.
- Remove edge bands from PU shutters and internal drawersRemove the mapped edge band from PU shutters or internal drawers so edge binding no longer appears on those parts.
- Apply a material to all instances of a repeated componentOpen material settings from the design element's settings panel to push a material across repeated components.
- Assign different core materials to different unit typesGive each unit type its own core material so wall units can differ from base units.
- Assign materials by searching subcategory in the material panelOpen the material or properties panel and select a material to apply it to the selected geometry.
- Change a core from QC mode's Core Materials selectorPick a core from QC mode's Core Materials selector and confirm the change by its toast, then close the core carousel left open at the bottom of the screen.
- Change a material colour via carousel, used-materials dropdown or pickerPick a colour from the carousel, switch between laminate and veneer categories, or reuse a colour already in the design from the used-materials dropdown.
- Change core and finish materials from the properties panelChange core and finish materials from the properties panel.
- Change finish, core material and countertop thickness at unit levelPick a unit's finish and core material from the carousel or dropdown.
- Change finishes in QC mode and see them in the 3D viewReplace a finish while in QC mode and the 3D view stays in sync with your change.
- Check edge bands and finishes in the material listReview edge bands for shutters and carcass in the material list.
- Find every material used or tried in the designOpen the drop-down on the first line of the third bottom-left panel button to see every material used or tried in the design.
- How finish categories control shutter and carcass surfacesLearn how the four finish categories decide which panel surface a finish is applied to and why choosing correctly matters.
- Override a material colour in design using RGB valuesChange a material's colour for a single design without editing the catalogue by entering RGB values in the texture dropdown.
- Rotate the finish grain or texture on a panelRotate a laminate's grain or texture on a panel face by 0, 90, 180 or 270 degrees from the panel's material section.
- Select core material and edge band for cabinetsChoose the core material and edge band specification for your cabinets, and optionally set skirting finishes.
- Set External finish source to shutter external finishSet the External finish source to the shutter external finish so a thick shutter core gets its finish from the right place.
- Set external finish equal to internal in construction styleLink the external finish to the internal finish in a construction style so both stay the same.
- Set internal finish and profile handles on cabinetsConfigure the internal finish on the left side of the cabinet and choose a profile system with its handle sides and colours.
- Use a finish row's three-dot menu and apply material changes to all instancesOpen a finish row's three-dot menu to clone a material, open Material Settings or reset to default, and see the change on every unit using that finish.
- Use the house button to see the full material catalogueOpen the material or finish picker through the house button so you can reach every available option.
- Match carcass, side panel and edge band finishes to the shutterSet the carcass and side panel finishes separately and make edge bands follow the shutter's visible edge band setting.
- Insert sliding shutter system and apply external finishes to panelsComplete a wardrobe by inserting a sliding shutter system, customizing panel design options and applying an external finish to the panels.
- Change a shutter's core material to glass at panel levelSwitch a shutter's core to a custom material such as plain glass and set the glass thickness through the chosen core.
- Change cabinet core material via admin tabUpdate a cabinet's or corner unit's core material from the admin tab and confirm the settings so the change applies to the selected unit.
- Set cabinet-level shutter and carcass finishes and coresPick the shutter and carcass finishes and core materials from the properties panel so inheriting shutters follow the cabinet.
- Change cabinet finishes, core materials and edgebands via Change MaterialsChange a cabinet's finishes and core materials first, then its edgebands, using Change Materials.
- Change carcass finish for one cabinetChange the carcass finish at cabinet level to update all carcass panels of the selected cabinet together, without affecting other cabinets of the same kind.
- Configure shutter and carcass material thickness and finishes separatelySet the core material and finish for the carcass and the shutter independently so each component carries its own selection.
- Control shutter edge visibility with the visible edge band settingSet the shutter visible edge band value to determine which edge band is shown on shutters.
- Understand cabinet panel materials and linked finishesSee what each sub-tab under a cabinet's Materials holds and how linked finishes and profiles change edge bands and finishes automatically.
- Change shutter colour at cabinet level and panel finish at panel levelSet the shutter colour for a whole cabinet and the external finish for an individual panel.
- Generate multi-cabinet elevations and change finishes in bulkOpen a cabinet's 2D Drawings to generate elevations covering several cabinets, then group-select cabinets to change their materials and finishes in one action.
- How panel thickness is driven by the core materialLearn how a panel's thickness follows from the core material you add to it.
- Override a panel's inherited materialSwitch a panel property to custom so you can pick a different material for that panel alone.
- Remove a shutter profile or change the core materialTake a profile off a shutter from the Shutter Profiles section and switch the shutter core material from the core material subcategory.
- Select a cabinet to open finish and edge-band settingsSelect a cabinet to open its properties panel, then set its finishes, back panel core and edge bands under Materials.
- Set shutter and carcass core material and thicknessChoose a core material such as BWP, BW or HDMR for shutters and carcasses and give each a thickness, with the back panel defaulting to 6 mm standard material.
- Replace a countertop finish using the Replace buttonChange the finish of a countertop by selecting its units and picking a new option from the Replace list.
- Use custom finish and match property to copy a finish onto a panelApply a specific finish to a panel whose external finish is source-driven by selecting the panel, opening external finish source and choosing custom finish.
- Add custom panels to a drawer system and map them as carcass materialAdd custom panels at the drawer system level and set their material at any panel level to map them as carcass material.
- Change cabinet size and understand material categoriesResize a cabinet from the properties panel and learn how its materials are grouped.
- Change skirting finish independently of shutterGive the skirting of a skirting wardrobe its own finish instead of the shutter's default.
- How exposed panel finish is appliedLearn how exposed panels take their finish by default and how to give one a different look.
- Link back panel core material to carcass core materialLink each back core material to its matching carcass core material in cabinet preferences so the back panel core applies by default across all cabinets.
- Change countertop and cabinet material using laminate solidsConfirm the material change by modifying the countertop and applying the changes.
- Change door model, finish and handlePick a door model from the carousel, then set its finish and handle from meshes and materials.
- Change handles and materials for multiple units at onceSelect several units together and swap their finishes in a single action with the change material / interchange control.
- How drawer finishes inherit carcass finishesLearn how drawer finishes follow the carcass internal and external finish until you change them explicitly at the drawer system level.
- How the back panel material is set and changedLearn how the back panel material defaults to a 6 mm standard board and how to change it when a different thickness or material is required.
- Set shutters and drawers to internal finish to keep outer frame visibleMake the outer frame sit outside the shutter face by setting the shutter to internal and the drawer facia to the external finish.
- Add a custom vertical panel via Furnish > Panels and apply a laminate finishCreate a custom vertical panel by choosing its material and finish, then setting its dimensions.
- Change a linked panel finish at the individual panel levelMark a panel as custom at the individual panel level so you can change its linked finish or edge band there.
- Change a panel's core material via the material pickerOpen the material picker, select the core material on the page, then set the panel role at panel level.
- Change a single panel's material from the panel sectionSelect one panel and give it a material of its own, separate from the cabinet-level material.
- Change ceiling tile pattern material and grouting line colourApply a tile as the ceiling pattern material and then change the colour of its grouting lines.
- Change countertop material and thickness from the Countertop menuPick the countertop material and set its thickness, either following the material SKU or entering a value yourself.
- Change countertop material via selection tree or unitChange a countertop's material by selecting the unit or using the selection tree, then choosing a subcategory and a specific material or colour.
- Change tiling material from flooring to wall tilesSwitch the material applied to a tiled surface from flooring tiles to wall tiles in the tiling pattern settings.
- Change wardrobe shutter material, edge band, handle and placement in propertiesSelect a wardrobe and change its shutter materials and finishes, edge bands, handles and handle placement from the properties panel.
- Check hardware and materials in QC ModeUse QC Mode to verify each unit's hardware and materials against the design-wide raw materials list before production.
- Choose carcass external and internal finishesPick the carcass external finish and the carcass internal finish from their own material pickers in the cabinet's properties panel after selecting the cabinet, with the internal picker setting the inside colour.
- How cabinet material properties are setA cabinet's material properties are set through several separate fields, and the shutter external finish is typically chosen separately from the rest.
- How the back panel material is chosen for a 16 mm HDMR carcassLearn how setting a cabinet carcass to 16 mm HDMR automatically applies a 6 mm HDMR back panel.
- Make inside shelf fixed and set shutter materialSet the inside shelf of a cabinet as a fixed panel and reduce it 20 mm from the front.
- Reuse project materials without reopening the catalogueSelect a finish or material already used in the project directly, without picking it from the catalogue again.
- Set carcass core and back-panel material defaults before placing cabinetsChoose the carcass core and back-panel core materials in the cabinet-level preference so new cabinets are added with them.
- Set drawer filler width and match filler panel material thicknessMake a drawer filler panel thicker by giving it its own custom core material so it matches the surrounding 25 mm board.
- Understand where panel materials come fromSee how each panel's core, finishes and edgebands inherit from unit-level channels based on the panel's role.
- Add a slab and set its shape, elevation, thickness and materialDraw a slab outline in the 2D sketcher, apply it, then select the slab to adjust its shape, elevation, thickness or material.
- Add wallpaper or paint via wall finish materialGive a wall a wallpaper or paint finish by choosing it from the wall's finish material options.
- Change tile pattern, size, grout and material from tiling propertiesAdjust the layout pattern, tile dimensions, grout lines and tile material of an applied floor from its tiling properties.
- Change tile size and material from the tile optionsSelect a tile to see its depth, then set its dimensions and apply a pattern or material at the scale you want.
- Customize dimensions, materials, finishes and countertop in Quick AccessApply catalog finishes to shutter and carcass faces and pick a countertop from the catalog in Quick Access.
- Decide when to fix a panel's materialChoose between editing an existing panel and adding a new one, and keep custom materials to panels meant to stay fixed.
- Do not change cabinet material texture scale or image locallyMaterial texture properties such as the texture image and width/height scale are controlled centrally in the catalogue, so leave them unchanged in the design.
- Find panels not following carcass materialSpot panels whose custom core material does not follow the carcass by looking for the custom core property under the core section.
- Fix a panel's internal finish that will not changeWhen a panel's internal finish will not change in any output, an automation rule may be overriding it.
- Fix skirting panels inheriting unexpected materialsWhen a skirting panel picks up the wrong material in every new design, check whether an admin skirting preference is overriding the component's configured inheritance.
- How exposed panels take shutter core and finishLearn what happens to a panel's core material, finish and board layout when you change it to an exposed panel.
- How panel thickness formulas read the cabinet-level core materialLearn where a panel thickness formula such as carcass panel thickness or shutter panel thickness takes its value from.
- Make a panel follow another finishLink a panel's finish slot to another finish so the panel inherits it and updates automatically when that finish changes.
- Modify shutters, handles, drawers and materials from the property tabChange shutters, handles, drawers and materials from the property tab and see each change apply in a click.
- Set panel visibility and finish per panelSelect the correct panel before changing its finish, because visibility settings apply per panel.
- Set shutter and carcass core material and thickness from Quick AccessSet the shutter and carcass core material and its thickness from Quick Access.
- Set wall height, thickness and materialEnter wall height, thickness and material either in the wall tool settings before drawing or in the selected wall's properties panel afterwards.
- Update panels with Custom Finish after a bulk finish changeChange project finishes in bulk, then update any panel whose finish source is set to Custom Finish one by one on the panel itself.
- Use filter by unit SK name to narrow materials in large projectsNarrow the materials shown in the material QC view of a large project by filtering on a key such as unit SK name.
More guides 2
Show all (2)
- Understand why edgeband changes or disappears on its ownLearn how manufacturing rules, edge profiles, linked finishes and visualization settings change or hide edge bands on your panels.
- How double-sided laminate pasting is countedLearn how the system counts laminate material when it is pasted on both faces of a panel.