天花板
指南:35
- 将假天花添加为真天花的子项请先为房间添加真天花,然后用拉伸矩形工具绘制假天花,并设置其下垂高度和板厚。
- 在应用内创建假天花板,无需在 AutoCAD 中绘图直接在设计工具中为定制假天花板建模,并将其添加到设计中。
- 添加真实天花板,并用偏移创建假天花板使用天花板工具添加真实天花板,然后通过绘制矩形或偏移副本创建周边假天花板。
- 从房间角落绘制天花板,不留墙缝通过天花板命令菜单绘制矩形来添加天花板,然后用同样的方式添加铺砖。
- 在创建假天花前添加真天花请先添加真天花,然后才能在其上设计假天花。
- 从RCC楼板创建假天花板添加天花板,然后使用其Create False Ceiling选项绘制假天花板,因为用Slabs工具绘制的楼板没有此选项。
- 使用圆角工具创建带弧形转角的周边假天花在天花上绘制一个内缩矩形,用圆角工具将其转角倒圆,然后设置下垂深度和材质。
- 从平面图添加天花板,并使标高与墙高匹配在平面图视图中选择天花板选项,并在房间内应用,即可添加天花板。
- 用2D矩形和拉伸创建假天花板用2D矩形和拉伸创建假天花板,然后逐一添加和调整灯具类型。
- 创建带周边吊边的假天花使用分层矩形,为带可见周边吊边和中央岛区的假天花建模。
- Create false ceiling drops with extrude and offsetBuild peripheral and island false ceilings using the extrude and create-false-ceiling tools.
- 创建岛式和周边式假天花板,并设置偏移和前移创建岛式和周边式假天花板,并在周边式假天花板上设置厚度和前移,为灯带留出间隙。
- 重新创建错误的天花板,并添加带开启方向的门删除错误的天花板,重新创建一个新的天花板,并在方案中添加门。
- 将跌级吊顶的标高设置为墙高减去吊顶厚度定义跌级吊顶的形状和厚度,然后将其标高设置为墙高减去吊顶厚度,使吊顶正确位于墙顶下方。
- 拉伸时设置真实天花板与假天花板之间的间隙使用拉伸深度设置假天花板的厚度,使用前移量设置其低于真实天花板的距离。
- Add a ceiling and set up a false ceilingDraw a ceiling outline in the 2D sketcher, then adjust its elevation, thickness and material and add a false ceiling shape beneath it.
- Add a ceiling and tiling with the pick toolDraw a ceiling and tiling inside the room with the pick tool, then adjust the tiling pattern and size.
- Add a ceiling by picking inside the room and applyingCreate a ceiling from the floor plan and adjust its elevation and thickness on the ceiling itself.
- Create a ceiling or tiling from a closed room shapePick the shape tool, select a closed room shape, and apply it to create a ceiling or tiling.
- 使用偏移复制或移动创建周边假天花与中央假天花在天花板上绘制一个假天花矩形,然后选择偏移复制以创建周边边框,或选择移动以创建中央面板。
- Draw ceilings, tiling and strip lights in the 2D sketcherOpen the 2D sketcher to draw ceilings, tiling and strip lights with Pick, line, arc, circle, rectangle and polygon tools, then apply the result.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Use the cutting tool on ceilings, panelling and wardrobe panelsApply the cutting tool to ceilings, panelling and wardrobe panels, not just one surface type.
- 根据天花板标高设置墙高和楼板厚度通过读取天花板标高并在同一面板中设置楼板厚度,为厨房布局确定正确的墙高。
- 像添加天花板一样添加铺砖完全按照添加天花板的方式添加铺砖,然后调整其默认厚度和图案选项,例如 45 度旋转和 90 度旋转。
- 创建房间,并将其铺砖、地板和天花板复制到其他房间在平面图上添加房间,用瓷砖和天花板饰面完成装修,然后将其元素复制粘贴到其他房间以复用该设置。
- 核心设计步骤:墙体、门、窗、天花板和瓷砖绘制墙体、添加门、添加窗、添加天花板并添加瓷砖,即可完成设计。
- 将柜体侧封板延伸至地面或天花板从柜体的 End Panel 区域添加的侧封板,可使用 Width Extension 数值向下延伸至地面,或从其自身的板件向上延伸。
- 通过目录或放置方式导入天花板和道具的3D模型通过上传并发布到目录或直接放置,将外部3D模型引入设计。
- 按顺序添加墙壁、开口、天花板和瓷砖来创建房间将墙壁完全闭合,以便天花板工具检测房间区域并自动测量天花板,然后在 3D 中查看和编辑房间。
- 在房间层级从建筑部分添加瓷砖和天花板通过应用建筑部分的瓷砖和天花板来完成房间,然后使天花板与墙壁匹配。
- 使用 TI 快捷键添加瓷砖,并通过 Architecture 菜单添加天花板使用铺砖工具或快捷键 T I Enter 为房间添加瓷砖,自定义其深度、图案、尺寸和填缝线,然后从 Architecture 菜单放置天花板。
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- Use the pick tool to select internal wall faces for ceilings and tilingPick internal wall faces to sketch a ceiling and apply tiling, then adjust tile material, pattern, size and grout appearance room by room.