கூரைகள்
வழிகாட்டிகள்: 35
- உண்மையான கூரையின் கீழ்க்குழந்தையாக தவறான கூரையைச் சேர்க்கவும்முதலில் அறைக்கு உண்மையான கூரையைச் சேர்க்கவும், பின்னர் extrude rectangle கருவியால் தவறான கூரையை வரைந்து அதன் drop height மற்றும் slab thickness-ஐ அமைக்கவும்.
- AutoCAD-இல் வரைபடம் வரையாமல் ஆப்-இல் தவறான கூரைகளை உருவாக்குங்கள்வடிவமைப்புக் கருவியில் நேரடியாகத் தனிப்பயனாக்கப்பட்ட தவறான கூரைகளை மாதிரியாக்கி, அவற்றை உங்கள் வடிவமைப்பில் சேர்க்கவும்.
- உண்மையான கூரையைச் சேர்த்து, ஆஃப்செட் மூலம் பொய் கூரையை உருவாக்குங்கள்ceiling tool மூலம் உண்மையான கூரையைச் சேர்த்து, பின்னர் ஒரு செவ்வகம் வரைந்தோ அல்லது சுற்றளவுக்கான நகலை ஆஃப்செட் செய்தோ பொய் கூரையை உருவாக்குங்கள்.
- சுவர் இடைவெளி இல்லாமல் அறையின் மூலையிலிருந்து கூரைகளை வரையவும்கூரை கட்டளை மெனுவிலிருந்து ஒரு செவ்வகம் வரைந்து கூரையைச் சேர்க்கவும், பின்னர் அதே வழியில் ஓடுபதிவைச் சேர்க்கவும்.
- போலி உச்சியை உருவாக்கும் முன் உண்மை உச்சியைச் சேர்க்கவும்முதலில் உண்மை உச்சியைச் சேர்க்கவும், பின்னர் அதன் மேல் போலி உச்சியை வடிவமைக்கலாம்.
- RCC ஸ்லாப்பில் இருந்து ஒரு தவறான கூரையை உருவாக்கவும்ஒரு கூரையைச் சேர்க்கவும், பின்னர் அதன் Create False Ceiling விருப்பத்தைப் பயன்படுத்தி ஒரு தவறான கூரையை வரையவும், ஏனெனில் Slabs கருவியால் வரையப்பட்ட ஸ்லாப்பில் அத்தகைய விருப்பம் இல்லை.
- ஃபில்லெட் பயன்படுத்தி வளைந்த மூலைகளுடன் ஒரு சுற்றளவு தவறான கூரையை உருவாக்கவும்கூரையில் ஒரு உள்தள்ளிய செவ்வகத்தை வரையவும், Fillet கருவியால் அதன் மூலைகளை வட்டமாக்கவும், பின்னர் இறக்க ஆழம் மற்றும் பொருளை அமைக்கவும்.
- தளத் திட்டத்திலிருந்து கூரையைச் சேர்த்து, உயரத்தைச் சுவர் உயரத்திற்குப் பொருத்துங்கள்தளத் திட்டக் காட்சியில் ceiling விருப்பத்தைத் தேர்ந்தெடுத்து, அறைக்குள் அதைப் பயன்படுத்தி கூரையைச் சேர்க்கவும்.
- 2D செவ்வகங்கள் மற்றும் எக்ஸ்ட்ரூஷன்களில் இருந்து பொய்யான கூரைகளை உருவாக்குங்கள்2D செவ்வகங்கள் மற்றும் எக்ஸ்ட்ரூஷன்களில் இருந்து பொய்யான கூரையை உருவாக்கி, பின்னர் விளக்கு வகைகளை தனித்தனியாகச் சேர்த்து சரிசெய்யுங்கள்.
- சுற்றளவு இறக்கத்துடன் ஒரு பொய்யான கூரையை உருவாக்கவும்அடுக்கப்பட்ட செவ்வகங்களைப் பயன்படுத்தி, தெரியும் சுற்றளவு இறக்கமும் மையத் தீவும் கொண்ட பொய்யான கூரையை வடிவமைக்கவும்.
- Create false ceiling drops with extrude and offsetBuild peripheral and island false ceilings using the extrude and create-false-ceiling tools.
- Create island and peripheral false ceilings with offset and front shiftCreate island and peripheral false ceilings, and set thickness and front shift on a peripheral ceiling to leave a gap for strip lighting.
- தவறான கூரையை மீண்டும் உருவாக்கி, திறக்கும் திசையுடன் கதவுகளைச் சேர்க்கவும்தவறான கூரையை நீக்கி, புதியதை உருவாக்கி, உங்கள் திட்டத்தில் கதவுகளைச் சேர்க்கவும்.
- ஃபால் சீலிங் உயரத்தை சுவர் உயரத்திலிருந்து சீலிங் தடிமனைக் கழித்து அமைக்கவும்ஃபால் சீலிங்கின் வடிவம் மற்றும் தடிமனை வரையறுத்து, சுவர் உச்சிக்குக் கீழே சீலிங் சரியாக அமையும்படி அதன் உயரத்தை சுவர் உயரத்திலிருந்து சீலிங் தடிமனைக் கழித்து அமைக்கவும்.
- உண்மையான கூரைக்கும் பொய்யான கூரைக்கும் இடையிலான இடைவெளியை எக்ஸ்ட்ரூட் செய்யும்போது அமைக்கவும்பொய்யான கூரையின் தடிமனுக்கு எக்ஸ்ட்ரூட் ஆழத்தையும், உண்மையான கூரைக்குக் கீழே எவ்வளவு தொங்குகிறது என்பதற்கு முன் மாற்றத்தையும் பயன்படுத்தவும்.
- Add a ceiling and set up a false ceilingDraw a ceiling outline in the 2D sketcher, then adjust its elevation, thickness and material and add a false ceiling shape beneath it.
- Add a ceiling and tiling with the pick toolDraw a ceiling and tiling inside the room with the pick tool, then adjust the tiling pattern and size.
- Add a ceiling by picking inside the room and applyingCreate a ceiling from the floor plan and adjust its elevation and thickness on the ceiling itself.
- Create a ceiling or tiling from a closed room shapePick the shape tool, select a closed room shape, and apply it to create a ceiling or tiling.
- Offset copy அல்லது move பயன்படுத்தி சுற்றளவு மற்றும் மைய false ceiling உருவாக்குதல்கூரையில் ஒரு false ceiling செவ்வகத்தை model செய்து, பின்னர் சுற்றளவு border-க்கு offset copy அல்லது மைய panel-க்கு move தேர்ந்தெடுக்கவும்.
- Draw ceilings, tiling and strip lights in the 2D sketcherOpen the 2D sketcher to draw ceilings, tiling and strip lights with Pick, line, arc, circle, rectangle and polygon tools, then apply the result.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Use the cutting tool on ceilings, panelling and wardrobe panelsApply the cutting tool to ceilings, panelling and wardrobe panels, not just one surface type.
- Set wall height and slab thickness from ceiling elevationEstablish the correct wall height for a kitchen layout by reading the ceiling's elevation and setting the slab thickness from the same panel.
- Add tiling the same way as a ceilingAdd tiling exactly as you add a ceiling, then adjust its default thickness and pattern options such as 45-degree and 90-degree rotation.
- ஒரு அறையை உருவாக்கி அதன் ஓடுபதிவு, தரை மற்றும் கூரையை மற்ற அறைகளுக்கு நகலெடுக்கவும்தரைத் திட்டத்தில் ஒரு அறையைச் சேர்க்கவும், அதை ஓடுகள் மற்றும் கூரை ஃபினிஷ்களால் முடிக்கவும், பின்னர் அதன் உறுப்புகளை மற்ற அறைகளுக்கு நகலெடுத்து ஒட்டி அமைப்பை மீண்டும் பயன்படுத்தவும்.
- முக்கிய வடிவமைப்பு படிகள்: சுவர், கதவு, ஜன்னல், கூரை மற்றும் ஓடு பதித்தல்ஒரு வடிவமைப்பை முடிக்க சுவர்களை வரையவும், கதவுகளைச் சேர்க்கவும், ஜன்னல்களைச் சேர்க்கவும், கூரையைச் சேர்க்கவும், ஓடு பதித்தலைச் சேர்க்கவும்.
- கேபினெட்டின் இறுதிப் பலகையைத் தரை அல்லது கூரை வரை நீட்டவும்ஒரு கேபினெட்டின் End Panel பிரிவில் இருந்து சேர்க்கப்பட்ட இறுதிப் பலகையை, Width Extension மதிப்புகளைப் பயன்படுத்தி, கீழ்நோக்கித் தரை வரை அல்லது அதன் சொந்தப் பலகையிலிருந்து மேல்நோக்கி நீட்டவும்.
- கூரைகள் மற்றும் பொருட்களுக்கான 3D மாதிரிகளை பட்டியல் அல்லது இடவைப்பு வழியாக இறக்குமதி செய்யுங்கள்ஒரு வெளிப்புற 3D மாதிரியை பதிவேற்றி பட்டியலில் வெளியிட்டோ அல்லது நேரடியாக இடவைத்தோ ஒரு வடிவமைப்பில் சேர்க்கலாம்.
- Create a room by adding walls, openings, ceiling and tiles in sequenceClose the walls fully so the ceiling tool detects the room area and measures the ceiling automatically, then view and edit the room in 3D.
- அறை நிலையில் architecture-இல் இருந்து tiles மற்றும் ceiling சேர்க்கவும்architecture பிரிவில் இருந்து tiles மற்றும் ceiling பயன்படுத்தி அறையை முழுமையாக்கவும், பின்னர் ceiling-ஐ உங்கள் walls-க்கு பொருத்தவும்.
- TI குறுக்குவழியால் ஓடுகளைச் சேர்க்கவும், Architecture மெனுவின் வழியாக கூரைகளைச் சேர்க்கவும்tiling கருவி அல்லது T I Enter குறுக்குவழியைப் பயன்படுத்தி ஒரு அறைக்கு ஓடுகளைச் சேர்க்கவும், அவற்றின் ஆழம், வடிவமைப்பு, அளவு மற்றும் கிரவுட் கோட்டைத் தனிப்பயனாக்கவும், பின்னர் Architecture மெனுவிலிருந்து ஒரு கூரையை வைக்கவும்.
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- Use the pick tool to select internal wall faces for ceilings and tilingPick internal wall faces to sketch a ceiling and apply tiling, then adjust tile material, pattern, size and grout appearance room by room.