천장
가이드: 35
- 진천장을 실제 천장의 하위 요소로 추가먼저 방에 실제 천장을 추가한 다음, extrude rectangle 도구로 진천장을 그리고 내림 높이와 슬래브 두께를 설정하세요.
- AutoCAD에서 도면을 작성하지 않고 앱에서 반자 천장을 생성하세요디자인 도구에서 맞춤형 반자 천장을 직접 모델링하고 디자인에 추가하세요.
- 실제 천장을 추가하고 오프셋으로 거짓 천장 만들기천장 도구로 실제 천장을 추가한 다음, 사각형을 그리거나 사본을 오프셋하여 주변부 거짓 천장을 만드세요.
- 벽 틈 없이 방 모서리에서 천장을 그립니다천장 명령 메뉴에서 사각형을 그려 천장을 추가한 다음, 같은 방법으로 타일링을 추가합니다.
- 거짓 천장을 만들기 전에 실제 천장 추가먼저 실제 천장을 추가해야 그 위에 거짓 천장을 설계할 수 있습니다.
- RCC 슬래브에서 반자 천장 만들기천장을 추가한 다음 Create False Ceiling 옵션을 사용하여 반자 천장을 그리세요. Slabs 도구로 그린 슬래브에는 이 옵션이 없습니다.
- Fillet을 사용해 모서리가 곡선인 주변부 반자 천장을 만드세요.천장에 안쪽으로 들어간 사각형을 그리고 Fillet 도구로 모서리를 둥글게 만든 다음, 드롭 깊이와 재질을 설정하세요.
- 평면도에서 천장을 추가하고 입면을 벽 높이에 맞춥니다평면도 보기에서 ceiling 옵션을 선택하고 실내에 적용하여 천장을 추가합니다.
- 2D 사각형과 돌출로 반자 천장 만들기2D 사각형과 돌출로 반자 천장을 만든 다음, 조명 유형을 개별적으로 추가하고 조정하세요.
- 주변 단차가 있는 반자 천장 만들기레이어 사각형을 사용하여 눈에 보이는 주변 단차와 중앙 아일랜드가 있는 반자 천장을 모델링합니다.
- 돌출과 오프셋으로 반자 드롭 만들기돌출 및 반자 만들기 도구를 사용하여 주변부 및 아일랜드 반자를 만듭니다.
- 오프셋과 전면 이동을 사용하여 아일랜드 및 주변부 반자 천장 만들기아일랜드 및 주변부 반자 천장을 만들고, 주변부 반자 천장에 두께와 전면 이동을 설정하여 스트립 조명을 위한 간격을 남기세요.
- 잘못된 천장을 다시 만들고 개폐 방향이 있는 문을 추가하세요잘못된 천장을 삭제하고 새로 만든 뒤, 도면에 문을 추가하세요.
- 폴 천장의 표고를 벽 높이에서 천장 두께를 뺀 값으로 설정폴 천장의 형상과 두께를 정의한 다음, 표고를 벽 높이에서 천장 두께를 뺀 값으로 설정하여 천장이 벽 상단 아래에 올바르게 위치하도록 합니다.
- 돌출할 때 실제 천장과 반자 천장 사이의 간격을 설정합니다반자 천장 두께에는 돌출 깊이를 사용하고, 실제 천장 아래로 얼마나 내려오는지는 전면 이동을 사용합니다.
- Add a ceiling and set up a false ceilingDraw a ceiling outline in the 2D sketcher, then adjust its elevation, thickness and material and add a false ceiling shape beneath it.
- Add a ceiling and tiling with the pick toolDraw a ceiling and tiling inside the room with the pick tool, then adjust the tiling pattern and size.
- Add a ceiling by picking inside the room and applyingCreate a ceiling from the floor plan and adjust its elevation and thickness on the ceiling itself.
- Create a ceiling or tiling from a closed room shapePick the shape tool, select a closed room shape, and apply it to create a ceiling or tiling.
- Create peripheral vs central false ceiling using offset copy or moveModel a false ceiling rectangle on the ceiling, then choose offset copy for a peripheral border or move for a central panel.
- Draw ceilings, tiling and strip lights in the 2D sketcherOpen the 2D sketcher to draw ceilings, tiling and strip lights with Pick, line, arc, circle, rectangle and polygon tools, then apply the result.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Use the cutting tool on ceilings, panelling and wardrobe panelsApply the cutting tool to ceilings, panelling and wardrobe panels, not just one surface type.
- 천장 높이에서 벽 높이와 슬래브 두께 설정천장의 높이를 읽고 같은 패널에서 슬래브 두께를 설정하여 주방 배치에 맞는 올바른 벽 높이를 정합니다.
- 천장과 같은 방식으로 타일링 추가천장을 추가할 때와 똑같이 타일링을 추가한 다음, 기본 두께와 45도 회전, 90도 회전 같은 패턴 옵션을 조정하세요.
- Create a room and copy its tiling, flooring and ceiling to other roomsAdd a room on the floor plan, finish it with tiles and ceiling finishes, then copy-paste its elements into other rooms to reuse the setup.
- 핵심 설계 단계: 벽, 문, 창, 천장 및 타일링벽을 그리고 문을 추가하고 창을 추가하고 천장을 추가하고 타일링을 추가하여 설계를 완성합니다.
- Extend a cabinet end panel to the floor or ceilingExtend an end panel added from a cabinet's End Panel section downward to the floor or upward from its own panel using the Width Extension values.
- 카탈로그 또는 배치를 통해 천장과 소품용 3D 모델 가져오기외부 3D 모델을 업로드하여 카탈로그에 게시하거나 직접 배치하여 디자인에 가져오세요.
- 벽, 개구부, 천장, 타일을 순서대로 추가하여 방을 만드세요벽을 완전히 닫으면 천장 도구가 방 영역을 감지하고 천장을 자동으로 측정합니다. 그런 다음 3D에서 방을 보고 편집하세요.
- 룸 레벨에서 아키텍처의 타일과 천장 추가아키텍처 섹션의 타일과 천장을 적용하여 룸을 완성한 다음, 천장을 벽에 맞추세요.
- TI 단축키로 타일을 추가하고 Architecture 메뉴에서 천장을 추가합니다타일링 도구 또는 단축키 T I Enter로 방에 타일을 추가하고 깊이, 패턴, 크기, 줄눈을 사용자 지정한 다음 Architecture 메뉴에서 천장을 배치합니다.
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- Use the pick tool to select internal wall faces for ceilings and tilingPick internal wall faces to sketch a ceiling and apply tiling, then adjust tile material, pattern, size and grout appearance room by room.