છત
માર્ગદર્શિકાઓ: 35
- સાચી ટોચમર્યાદાના ચાઇલ્ડ તરીકે ખોટી ટોચમર્યાદા ઉમેરોપહેલા રૂમમાં સાચી ટોચમર્યાદા ઉમેરો, પછી extrude rectangle ટૂલથી ખોટી ટોચમર્યાદા દોરો અને તેની drop height અને સ્લેબ જાડાઈ સેટ કરો.
- AutoCAD માં ડ્રાફ્ટિંગ કર્યા વિના એપમાં ફોલ્સ સીલિંગ બનાવોડિઝાઇન ટૂલમાં સીધા જ કસ્ટમાઇઝ્ડ ફોલ્સ સીલિંગ મોડેલ કરો અને તેમને તમારી ડિઝાઇનમાં ઉમેરો.
- સાચી ટોચમર્યાદા ઉમેરો અને ઓફસેટ સાથે ખોટી ટોચમર્યાદા બનાવોceiling tool વડે સાચી ટોચમર્યાદા ઉમેરો, પછી લંબચોરસ દોરીને અથવા પરિધીય ટોચમર્યાદા માટે નકલ ઓફસેટ કરીને ખોટી ટોચમર્યાદા બનાવો.
- Draw ceilings from the room corner with no wall gapAdd a ceiling by drawing a rectangle from the ceiling command menu, then add tiling the same way.
- ખોટી ટોચમર્યાદા બનાવતા પહેલા સાચી ટોચમર્યાદા ઉમેરોપહેલા સાચી ટોચમર્યાદા ઉમેરો, જેથી પછી તમે તેની ઉપર ખોટી ટોચમર્યાદા ડિઝાઇન કરી શકો.
- RCC સ્લેબમાંથી ખોટી ટોચમર્યાદા બનાવોટોચમર્યાદા ઉમેરો, પછી ખોટી ટોચમર્યાદા દોરવા માટે તેના Create False Ceiling વિકલ્પનો ઉપયોગ કરો, કારણ કે Slabs ટૂલથી દોરેલા સ્લેબમાં આવો વિકલ્પ હોતો નથી.
- ફિલેટનો ઉપયોગ કરીને વળાંકવાળા ખૂણાઓ સાથે પેરિફેરલ ફોલ્સ સીલિંગ બનાવોસીલિંગ પર એક ઇનસેટ લંબચોરસ દોરો, Fillet ટૂલથી તેના ખૂણા ગોળ કરો, પછી ડ્રોપ ડેપ્થ અને મટીરિયલ સેટ કરો.
- ફ્લોર પ્લાનમાંથી ટોચમર્યાદા ઉમેરો અને એલિવેશનને દીવાલની ઊંચાઈ સાથે મેળવોફ્લોર પ્લાન વ્યૂમાં ceiling વિકલ્પ પસંદ કરીને અને રૂમની અંદર તેને લાગુ કરીને ટોચમર્યાદા ઉમેરો.
- Build false ceilings from 2D rectangles and extrusionsCreate a false ceiling from 2D rectangles and extrusions, then add and adjust lighting types individually.
- Create a false ceiling with a peripheral dropModel a false ceiling with a visible peripheral drop and a central island using layered rectangles.
- એક્સ્ટ્રુડ અને ઓફસેટ વડે ખોટી ટોચમર્યાદાના ડ્રોપ બનાવોએક્સ્ટ્રુડ અને ખોટી ટોચમર્યાદા બનાવવાના સાધનો વડે પેરિફેરલ અને આઇલેન્ડ ખોટી ટોચમર્યાદા બનાવો.
- ઓફસેટ અને ફ્રન્ટ શિફ્ટ સાથે આઇલેન્ડ અને પેરિફેરલ ફોલ્સ સીલિંગ બનાવોઆઇલેન્ડ અને પેરિફેરલ ફોલ્સ સીલિંગ બનાવો, અને સ્ટ્રિપ લાઇટિંગ માટે જગ્યા રાખવા પેરિફેરલ સીલિંગ પર જાડાઈ અને ફ્રન્ટ શિફ્ટ સેટ કરો.
- ખોટી ટોચમર્યાદા ફરીથી બનાવો અને ખુલવાની દિશા સાથે દરવાજા ઉમેરોખોટી ટોચમર્યાદા કાઢી નાખો, નવી ટોચમર્યાદા બનાવો અને તમારા પ્લાનમાં દરવાજા ઉમેરો.
- ફોલ સીલિંગની ઊંચાઈને દીવાલની ઊંચાઈ ઓછી સીલિંગની જાડાઈ પર સેટ કરોફોલ સીલિંગનો આકાર અને જાડાઈ નક્કી કરો, પછી તેની ઊંચાઈને દીવાલની ઊંચાઈ ઓછી સીલિંગની જાડાઈ પર સેટ કરો જેથી સીલિંગ દીવાલની ટોચની નીચે યોગ્ય રીતે બેસે.
- ટ્રુ સીલિંગ અને ફોલ્સ સીલિંગ વચ્ચેનું અંતર એક્સ્ટ્રુડ કરતી વખતે સેટ કરોફોલ્સ સીલિંગની જાડાઈ માટે એક્સ્ટ્રુડ ડેપ્થ અને ટ્રુ સીલિંગથી કેટલું નીચે લટકે તે માટે ફ્રન્ટ શિફ્ટ વાપરો.
- Add a ceiling and set up a false ceilingDraw a ceiling outline in the 2D sketcher, then adjust its elevation, thickness and material and add a false ceiling shape beneath it.
- Add a ceiling and tiling with the pick toolDraw a ceiling and tiling inside the room with the pick tool, then adjust the tiling pattern and size.
- Add a ceiling by picking inside the room and applyingCreate a ceiling from the floor plan and adjust its elevation and thickness on the ceiling itself.
- Create a ceiling or tiling from a closed room shapePick the shape tool, select a closed room shape, and apply it to create a ceiling or tiling.
- ઓફસેટ કોપી અથવા મૂવ વાપરીને પેરિફેરલ વિરુદ્ધ સેન્ટ્રલ ફોલ્સ સીલિંગ બનાવોછત પર ફોલ્સ સીલિંગનો લંબચોરસ બનાવો, પછી પેરિફેરલ બોર્ડર માટે ઓફસેટ કોપી અથવા સેન્ટ્રલ પેનલ માટે મૂવ પસંદ કરો.
- Draw ceilings, tiling and strip lights in the 2D sketcherOpen the 2D sketcher to draw ceilings, tiling and strip lights with Pick, line, arc, circle, rectangle and polygon tools, then apply the result.
- How ceilings and floors reference wallsLearn that a ceiling and floor in the design module can be created using a wall as a reference.
- Model a cove ceiling by offsetting and extruding an inner rectangleDraw an inner rectangle on the ceiling, offset it inward by about 100 mm, then extrude the offset section with a depth of 100 and a front shift of zero.
- Use the cutting tool on ceilings, panelling and wardrobe panelsApply the cutting tool to ceilings, panelling and wardrobe panels, not just one surface type.
- છતના એલિવેશન પરથી દીવાલની ઊંચાઈ અને સ્લેબની જાડાઈ સેટ કરોછતના એલિવેશનને વાંચીને અને એ જ પેનલમાંથી સ્લેબની જાડાઈ સેટ કરીને કિચન લેઆઉટ માટે યોગ્ય દીવાલની ઊંચાઈ નક્કી કરો.
- ટાઇલિંગ ઉમેરો, જેમ સીલિંગ ઉમેરો છો તેમટાઇલિંગ બરાબર એ જ રીતે ઉમેરો જેમ સીલિંગ ઉમેરો છો, પછી તેની ડિફોલ્ટ જાડાઈ અને 45-ડિગ્રી અને 90-ડિગ્રી રોટેશન જેવા પેટર્ન વિકલ્પો ગોઠવો.
- Create a room and copy its tiling, flooring and ceiling to other roomsAdd a room on the floor plan, finish it with tiles and ceiling finishes, then copy-paste its elements into other rooms to reuse the setup.
- મુખ્ય ડિઝાઇન પગલાં: દીવાલ, દરવાજો, બારી, છત અને ટાઇલિંગડિઝાઇન પૂર્ણ કરવા માટે દીવાલો દોરો, દરવાજા ઉમેરો, બારીઓ ઉમેરો, છત ઉમેરો અને ટાઇલિંગ ઉમેરો.
- કેબિનેટના એન્ડ પેનલને ફ્લોર કે સીલિંગ સુધી લંબાવોકેબિનેટના End Panel વિભાગમાંથી ઉમેરેલા એન્ડ પેનલને Width Extension મૂલ્યો વડે નીચે ફ્લોર સુધી કે તેના પોતાના પેનલથી ઉપર તરફ લંબાવો.
- કૅટલૉગ અથવા પ્લેસમેન્ટ દ્વારા સીલિંગ અને પ્રૉપ્સ માટે 3D મૉડલ આયાત કરોબાહ્ય 3D મૉડલને અપલોડ કરીને અને કૅટલૉગમાં પ્રકાશિત કરીને અથવા સીધું મૂકીને ડિઝાઇનમાં લાવો.
- દીવાલો, ખુલ્લા ભાગો, છત અને ટાઇલ્સ ક્રમમાં ઉમેરીને રૂમ બનાવોદીવાલો સંપૂર્ણ બંધ કરો જેથી છતનું સાધન રૂમનો વિસ્તાર ઓળખે અને છત આપમેળે માપે, પછી રૂમને 3D માં જુઓ અને સંપાદિત કરો.
- રૂમ સ્તરે આર્કિટેક્ચરમાંથી ટાઇલ્સ અને સીલિંગ ઉમેરોઆર્કિટેક્ચર વિભાગમાંથી ટાઇલ્સ અને સીલિંગ લાગુ કરીને રૂમ પૂર્ણ કરો, પછી સીલિંગને તમારી દીવાલો સાથે મેળવો.
- TI શોર્ટકટ વડે ટાઇલ્સ ઉમેરો અને Architecture મેનુ દ્વારા ટોચમર્યાદા ઉમેરોટાઇલિંગ ટૂલ અથવા T I Enter શોર્ટકટ વડે રૂમમાં ટાઇલ્સ ઉમેરો, તેમની ઊંડાઈ, પેટર્ન, માપ અને ગ્રાઉટ લાઇન કસ્ટમાઇઝ કરો, પછી Architecture મેનુમાંથી ટોચમર્યાદા મૂકો.
- Fix the non-zero area error when adding a slab, ceiling, roof, rail or tilingSlab, Add Ceiling, Roof, Rail and Tiling all open the 2D sketcher, where you draw a closed shape before applying.
- Use the pick tool to select internal wall faces for ceilings and tilingPick internal wall faces to sketch a ceiling and apply tiling, then adjust tile material, pattern, size and grout appearance room by room.